Contributors may be given commit privileges. Preference will be given to those with:
1. Past contributions to Freqtrade and other related open-source projects. Contributions to Freqtrade include both code (both accepted and pending) and friendly participation in the issue tracker and Pull request reviews. Quantity and quality are considered.
1. Past contributions to Freqtrade and other related open-source projects. Contributions to Freqtrade include both code (both accepted and pending) and friendly participation in the issue tracker and Pull request reviews. Both quantity and quality are considered.
1. A coding style that the other core committers find simple, minimal, and clean.
1. Access to resources for cross-platform development and testing.
@@ -618,13 +618,13 @@ To compare multiple strategies, a list of Strategies can be provided to backtest
This is limited to 1 timeframe value per run. However, data is only loaded once from disk so if you have multiple
strategies you'd like to compare, this will give a nice runtime boost.
All listed Strategies need to be in the same directory.
All listed Strategies need to be in the same directory, unless also `--recursive-strategy-search` is specified, where sub-directories within the strategy directory are also considered.
This will save the results to `user_data/backtest_results/backtest-result-<strategy>.json`, injecting the strategy-name into the target filename.
This will save the results to `user_data/backtest_results/backtest-result-<datetime>.json`, including results for both `Strategy001` and `Strategy002`.
There will be an additional table comparing win/losses of the different strategies (identical to the "Total" row in the first table).
Detailed output for all strategies one after the other will be available, so make sure to scroll up to see the details per strategy.
@@ -177,7 +177,7 @@ Mandatory parameters are marked as **Required**, which means that they are requi
| `exit_pricing.order_book_top` | Bot will use the top N rate in Order Book "price_side" to exit. I.e. a value of 2 will allow the bot to pick the 2nd ask rate in [Order Book Exit](#exit-price-with-orderbook-enabled)<br>*Defaults to `1`.* <br> **Datatype:** Positive Integer
| `custom_price_max_distance_ratio` | Configure maximum distance ratio between current and custom entry or exit price. <br>*Defaults to `0.02` 2%).*<br> **Datatype:** Positive float
| | **TODO**
| `use_exit_signal` | Use exit signals produced by the strategy in addition to the `minimal_roi`. [Strategy Override](#parameters-in-the-strategy). <br>*Defaults to `true`.* <br> **Datatype:** Boolean
| `use_exit_signal` | Use exit signals produced by the strategy in addition to the `minimal_roi`. <br>Setting this to false disables the usage of `"exit_long"` and `"exit_short"` columns. Has no influence on other exit methods (Stoploss, ROI, callbacks). [Strategy Override](#parameters-in-the-strategy). <br>*Defaults to `true`.* <br> **Datatype:** Boolean
| `exit_profit_only` | Wait until the bot reaches `exit_profit_offset` before taking an exit decision. [Strategy Override](#parameters-in-the-strategy). <br>*Defaults to `false`.* <br> **Datatype:** Boolean
| `exit_profit_offset` | Exit-signal is only active above this value. Only active in combination with `exit_profit_only=True`. [Strategy Override](#parameters-in-the-strategy). <br>*Defaults to `0.0`.* <br> **Datatype:** Float (as ratio)
| `ignore_roi_if_entry_signal` | Do not exit if the entry signal is still active. This setting takes preference over `minimal_roi` and `use_exit_signal`. [Strategy Override](#parameters-in-the-strategy). <br>*Defaults to `false`.* <br> **Datatype:** Boolean
@@ -321,7 +321,7 @@ For example, if you have 10 ETH available in your wallet on the exchange and `tr
To fully utilize compounding profits when using multiple bots on the same exchange account, you'll want to limit each bot to a certain starting balance.
This can be accomplished by setting `available_capital` to the desired starting balance.
Assuming your account has 10.000 USDT and you want to run 2 different strategies on this exchange.
Assuming your account has 10000 USDT and you want to run 2 different strategies on this exchange.
You'd set `available_capital=5000` - granting each bot an initial capital of 5000 USDT.
The bot will then split this starting balance equally into `max_open_trades` buckets.
Profitable trades will result in increased stake-sizes for this bot - without affecting the stake-sizes of the other bot.
@@ -594,7 +594,7 @@ creating trades on the exchange.
```json
"exchange": {
"name": "bittrex",
"name": "binance",
"key": "key",
"secret": "secret",
...
@@ -613,6 +613,7 @@ Once you will be happy with your bot performance running in the Dry-run mode, yo
* Orders are simulated, and will not be posted to the exchange.
* Market orders fill based on orderbook volume the moment the order is placed.
* Limit orders fill once the price reaches the defined level - or time out based on `unfilledtimeout` settings.
* Limit orders will be converted to market orders if they cross the price by more than 1%.
* In combination with `stoploss_on_exchange`, the stop_loss price is assumed to be filled.
* Open orders (not trades, which are stored in the database) are kept open after bot restarts, with the assumption that they were not filled while being offline.
@@ -643,7 +644,7 @@ API Keys are usually only required for live trading (trading for real money, bot
@@ -318,6 +318,7 @@ Additional tests / steps to complete:
* Check if balance shows correctly (*)
* Create market order (*)
* Create limit order (*)
* Cancel order (*)
* Complete trade (enter + exit) (*)
* Compare result calculation between exchange and bot
* Ensure fees are applied correctly (check the database against the exchange)
@@ -418,6 +419,9 @@ This part of the documentation is aimed at maintainers, and shows how to create
### Create release branch
!!! Note
Make sure that the `stable` branch is up-to-date!
First, pick a commit that's about one week old (to not include latest additions to releases).
``` bash
@@ -430,14 +434,11 @@ Determine if crucial bugfixes have been made between this commit and the current
* Merge the release branch (stable) into this branch.
* Edit `freqtrade/__init__.py` and add the version matching the current date (for example `2019.7` for July 2019). Minor versions can be `2019.7.1` should we need to do a second release that month. Version numbers must follow allowed versions from PEP0440 to avoid failures pushing to pypi.
* Commit this part.
* push that branch to the remote and create a PR against the stable branch.
* Push that branch to the remote and create a PR against the **stable branch**.
* Update develop version to next version following the pattern `2019.8-dev`.
### Create changelog from git commits
!!! Note
Make sure that the `stable` branch is up-to-date!
``` bash
# Needs to be done before merging / pulling that branch.
The `Edge Positioning` module uses probability to calculate your win rate and risk reward ratio. It will use these statistics to control your strategy trade entry points, position size and, stoploss.
!!! Danger "Deprecated functionality"
`Edge positioning` (or short Edge) is currently in maintenance mode only (we keep existing functionality alive) and should be considered as deprecated.
It will currently not receive new features until either someone stepped forward to take up ownership of that module - or we'll decide to remove edge from freqtrade.
!!! Warning
When using `Edge positioning` with a dynamic whitelist (VolumePairList), make sure to also use `AgeFilter` and set it to at least `calculate_since_number_of_days` to avoid problems with missing data.
@@ -55,7 +55,7 @@ This configuration enables kraken, as well as rate-limiting to avoid bans from t
## Binance
!!! Warning "Server location and geo-ip restrictions"
Please be aware that binance restrict api access regarding the server country. The currents and nonexhaustive countries blocked are United States, Malaysia (Singapour), Ontario (Canada). Please go to [binance terms > b. Eligibility](https://www.binance.com/en/terms) to find up to date list.
Please be aware that Binance restricts API access regarding the server country. The current and non-exhaustive countries blocked are Canada, Malaysia, Netherlands and United States. Please go to [binance terms > b. Eligibility](https://www.binance.com/en/terms) to find up to date list.
@@ -136,13 +136,41 @@ Freqtrade will not attempt to change these settings.
The Kraken API does only provide 720 historic candles, which is sufficient for Freqtrade dry-run and live trade modes, but is a problem for backtesting.
To download data for the Kraken exchange, using `--dl-trades` is mandatory, otherwise the bot will download the same 720 candles over and over, and you'll not have enough backtest data.
Due to the heavy rate-limiting applied by Kraken, the following configuration section should be used to download data:
To speed up downloading, you can download the [trades zip files](https://support.kraken.com/hc/en-us/articles/360047543791-Downloadable-historical-market-data-time-and-sales-) kraken provides.
These are usually updated once per quarter. Freqtrade expects these files to be placed in `user_data/data/kraken/trades_csv`.
``` json
"ccxt_async_config": {
"enableRateLimit": true,
"rateLimit": 3100
},
A structure as follows can make sense if using incremental files, with the "full" history in one directory, and incremental files in different directories.
The assumption for this mode is that the data is downloaded and unzipped keeping filenames as they are.
Duplicate content will be ignored (based on timestamp) - though the assumption is that there is no gap in the data.
This means, if your "full" history ends in Q4 2022 - then both incremental updates Q1 2023 and Q2 2023 are available.
Not having this will lead to incomplete data, and therefore invalid results while using the data.
@@ -153,48 +181,6 @@ Due to the heavy rate-limiting applied by Kraken, the following configuration se
Please pay attention that rateLimit configuration entry holds delay in milliseconds between requests, NOT requests\sec rate.
So, in order to mitigate Kraken API "Rate limit exceeded" exception, this configuration should be increased, NOT decreased.
## Bittrex
### Order types
Bittrex does not support market orders. If you have a message at the bot startup about this, you should change order type values set in your configuration and/or in the strategy from `"market"` to `"limit"`. See some more details on this [here in the FAQ](faq.md#im-getting-the-exchange-bittrex-does-not-support-market-orders-message-and-cannot-run-my-strategy).
Bittrex also does not support `VolumePairlist` due to limited / split API constellation at the moment.
Please use `StaticPairlist`. Other pairlists (other than `VolumePairlist`) should not be affected.
### Volume pairlist
Bittrex does not support the direct usage of VolumePairList. This can however be worked around by using the advanced mode with `lookback_days: 1` (or more), which will emulate 24h volume.
Read more in the [pairlist documentation](plugins.md#volumepairlist-advanced-mode).
### Restricted markets
Bittrex split its exchange into US and International versions.
The International version has more pairs available, however the API always returns all pairs, so there is currently no automated way to detect if you're affected by the restriction.
If you have restricted pairs in your whitelist, you'll get a warning message in the log on Freqtrade startup for each restricted pair.
The warning message will look similar to the following:
If you're an "International" customer on the Bittrex exchange, then this warning will probably not impact you.
If you're a US customer, the bot will fail to create orders for these pairs, and you should remove them from your whitelist.
You can get a list of restricted markets by using the following snippet:
``` python
import ccxt
ct = ccxt.bittrex()
lm = ct.load_markets()
res = [p for p, x in lm.items() if 'US' in x['info']['prohibitedIn']]
print(res)
```
## Kucoin
Kucoin requires a passphrase for each api key, you will therefore need to add this key into the configuration so your exchange section looks as follows:
@@ -274,6 +260,24 @@ We do strongly recommend to limit all API keys to the IP you're going to use it
Bybit (futures only) supports `stoploss_on_exchange` and uses `stop-loss-limit` orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange.
On futures, Bybit supports both `stop-limit` as well as `stop-market` orders. You can use either `"limit"` or `"market"` in the `order_types.stoploss` configuration setting to decide which type to use.
## Bitmart
Bitmart requires the API key Memo (the name you give the API key) to go along with the exchange key and secret.
It's therefore required to pass the UID as well.
```json
"exchange": {
"name": "bitmart",
"uid": "your_bitmart_api_key_memo",
"secret": "your_exchange_secret",
"password": "your_exchange_api_key_password",
// ...
}
```
!!! Warning "Necessary Verification"
Bitmart requires Verification Lvl2 to successfully trade on the spot market through the API - even though trading via UI works just fine with just Lvl1 verification.
## All exchanges
Should you experience constant errors with Nonce (like `InvalidNonce`), it is best to regenerate the API keys. Resetting Nonce is difficult and it's usually easier to regenerate the API keys.
@@ -128,15 +128,9 @@ This warning can point to one of the below problems:
* Barely traded pair -> Check the pair on the exchange webpage, look at the timeframe your strategy uses. If the pair does not have any volume in some candles (usually visualized with a "volume 0" bar, and a "_" as candle), this pair did not have any trades in this timeframe. These pairs should ideally be avoided, as they can cause problems with order-filling.
* API problem -> API returns wrong data (this only here for completeness, and should not happen with supported exchanges).
### I'm getting the "RESTRICTED_MARKET" message in the log
Currently known to happen for US Bittrex users.
Read [the Bittrex section about restricted markets](exchanges.md#restricted-markets) for more information.
### I'm getting the "Exchange XXX does not support market orders." message and cannot run my strategy
As the message says, your exchange does not support market orders and you have one of the [order types](configuration.md/#understand-order_types) set to "market". Your strategy was probably written with other exchanges in mind and sets "market" orders for "stoploss" orders, which is correct and preferable for most of the exchanges supporting market orders (but not for Bittrex and Gate.io).
As the message says, your exchange does not support market orders and you have one of the [order types](configuration.md/#understand-order_types) set to "market". Your strategy was probably written with other exchanges in mind and sets "market" orders for "stoploss" orders, which is correct and preferable for most of the exchanges supporting market orders (but not for Gate.io).
To fix this, redefine order types in the strategy to use "limit" instead of "market":
@@ -7,7 +7,7 @@ Low level feature engineering is performed in the user strategy within a set of
| Function | Description |
|---------------|-------------|
| `feature_engineering_expand_all()` | This optional function will automatically expand the defined features on the config defined `indicator_periods_candles`, `include_timeframes`, `include_shifted_candles`, and `include_corr_pairs`.
| `feature_engineering_expand_basic()` | This optional function will automatically expand the defined features on the config defined `include_timeframes`, `include_shifted_candles`, and `include_corr_pairs`. Note: this function does *not* expand across `include_periods_candles`.
| `feature_engineering_expand_basic()` | This optional function will automatically expand the defined features on the config defined `include_timeframes`, `include_shifted_candles`, and `include_corr_pairs`. Note: this function does *not* expand across `indicator_periods_candles`.
| `feature_engineering_standard()` | This optional function will be called once with the dataframe of the base timeframe. This is the final function to be called, which means that the dataframe entering this function will contain all the features and columns from the base asset created by the other `feature_engineering_expand` functions. This function is a good place to do custom exotic feature extractions (e.g. tsfresh). This function is also a good place for any feature that should not be auto-expanded upon (e.g., day of the week).
| `set_freqai_targets()` | Required function to set the targets for the model. All targets must be prepended with `&` to be recognized by the FreqAI internals.
@@ -178,7 +178,7 @@ You can ask for each of the defined features to be included also for informative
`include_shifted_candles` indicates the number of previous candles to include in the feature set. For example, `include_shifted_candles: 2` tells FreqAI to include the past 2 candles for each of the features in the feature set.
In total, the number of features the user of the presented example strat has created is: length of `include_timeframes`* no. features in `feature_engineering_expand_*()` * length of `include_corr_pairlist` * no. `include_shifted_candles` * length of `indicator_periods_candles`
In total, the number of features the user of the presented example strategy has created is: length of `include_timeframes`* no. features in `feature_engineering_expand_*()` * length of `include_corr_pairlist` * no. `include_shifted_candles` * length of `indicator_periods_candles`
$= 3 * 3 * 3 * 2 * 2 = 108$.
!!! note "Learn more about creative feature engineering"
@@ -74,7 +74,6 @@ Mandatory parameters are marked as **Required** and have to be set in one of the
| | **Reinforcement Learning Parameters within the `freqai.rl_config` sub dictionary**
| `rl_config` | A dictionary containing the control parameters for a Reinforcement Learning model. <br> **Datatype:** Dictionary.
| `train_cycles` | Training time steps will be set based on the `train_cycles * number of training data points. <br> **Datatype:** Integer.
| `cpu_count` | Number of processors to dedicate to the Reinforcement Learning training process. <br> **Datatype:** int.
| `max_trade_duration_candles`| Guides the agent training to keep trades below desired length. Example usage shown in `prediction_models/ReinforcementLearner.py` within the customizable `calculate_reward()` function. <br> **Datatype:** int.
| `model_type` | Model string from stable_baselines3 or SBcontrib. Available strings include: `'TRPO', 'ARS', 'RecurrentPPO', 'MaskablePPO', 'PPO', 'A2C', 'DQN'`. User should ensure that `model_training_parameters` match those available to the corresponding stable_baselines3 model by visiting their documentaiton. [PPO doc](https://stable-baselines3.readthedocs.io/en/master/modules/ppo.html) (external website) <br> **Datatype:** string.
| `policy_type` | One of the available policy types from stable_baselines3 <br> **Datatype:** string.
@@ -237,11 +237,10 @@ class MyCoolRLModel(ReinforcementLearner):
Reinforcement Learning models benefit from tracking training metrics. FreqAI has integrated Tensorboard to allow users to track training and evaluation performance across all coins and across all retrainings. Tensorboard is activated via the following command:
```bash
cd freqtrade
tensorboard --logdir user_data/models/unique-id
```
where `unique-id` is the `identifier` set in the `freqai` configuration file. This command must be run in a separate shell to view the output in their browser at 127.0.0.1:6006 (6006 is the default port used by Tensorboard).
where `unique-id` is the `identifier` set in the `freqai` configuration file. This command must be run in a separate shell to view the output in the browser at 127.0.0.1:6006 (6006 is the default port used by Tensorboard).
@@ -337,11 +337,15 @@ There are four parameter types each suited for different purposes.
* `CategoricalParameter` - defines a parameter with a predetermined number of choices.
* `BooleanParameter` - Shorthand for `CategoricalParameter([True, False])` - great for "enable" parameters.
!!! Tip "Disabling parameter optimization"
Each parameter takes two boolean parameters:
* `load` - when set to `False` it will not load values configured in `buy_params` and `sell_params`.
* `optimize` - when set to `False` parameter will not be included in optimization process.
Use these parameters to quickly prototype various ideas.
### Parameter options
There are two parameter options that can help you to quickly test various ideas:
* `optimize` - when set to `False`, the parameter will not be included in optimization process. (Default: True)
* `load` - when set to `False`, results of a previous hyperopt run (in `buy_params` and `sell_params` either in your strategy or the JSON output file) will not be used as the starting value for subsequent hyperopts. The default value specified in the parameter will be used instead. (Default: True)
!!! Tip "Effects of `load=False` on backtesting"
Be aware that setting the `load` option to `False` will mean backtesting will also use the default value specified in the parameter and *not* the value found through hyperoptimisation.
!!! Warning
Hyperoptable parameters cannot be used in `populate_indicators` - as hyperopt does not recalculate indicators for each epoch, so the starting value would be used in this case.
@@ -25,6 +25,7 @@ You may also use something like `.*DOWN/BTC` or `.*UP/BTC` to exclude leveraged
* [`ProducerPairList`](#producerpairlist)
* [`RemotePairList`](#remotepairlist)
* [`AgeFilter`](#agefilter)
* [`FullTradesFilter`](#fulltradesfilter)
* [`OffsetFilter`](#offsetfilter)
* [`PerformanceFilter`](#performancefilter)
* [`PrecisionFilter`](#precisionfilter)
@@ -111,8 +112,8 @@ For convenience `lookback_days` can be specified, which will imply that 1d candl
!!! Warning "Performance implications when using lookback range"
If used in first position in combination with lookback, the computation of the range based volume can be time and resource consuming, as it downloads candles for all tradable pairs. Hence it's highly advised to use the standard approach with `VolumeFilter` to narrow the pairlist down for further range volume calculation.
??? Tip "Unsupported exchanges (Bittrex, Gemini)"
On some exchanges (like Bittrex and Gemini), regular VolumePairList does not work as the api does not natively provide 24h volume. This can be worked around by using candle data to build the volume.
??? Tip "Unsupported exchanges"
On some exchanges (like Gemini), regular VolumePairList does not work as the api does not natively provide 24h volume. This can be worked around by using candle data to build the volume.
To roughly simulate 24h volume, you can use the following configuration.
Please note that These pairlists will only refresh once per day.
@@ -236,6 +237,17 @@ be caught out buying before the pair has finished dropping in price.
This filter allows freqtrade to ignore pairs until they have been listed for at least `min_days_listed` days and listed before `max_days_listed`.
#### FullTradesFilter
Shrink whitelist to consist only in-trade pairs when the trade slots are full (when `max_open_trades` isn't being set to `-1` in the config).
When the trade slots are full, there is no need to calculate indicators of the rest of the pairs (except informative pairs) since no new trade can be opened. By shrinking the whitelist to just the in-trade pairs, you can improve calculation speeds and reduce CPU usage. When a trade slot is free (either a trade is closed or `max_open_trades` value in config is increased), then the whitelist will return to normal state.
When multiple pairlist filters are being used, it's recommended to put this filter at second position directly below the primary pairlist, so when the trade slots are full, the bot doesn't have to download data for the rest of the filters.
!!! Warning "Backtesting"
`FullTradesFilter` does not support backtesting mode.
#### OffsetFilter
Offsets an incoming pairlist by a given `offset` value.
@@ -376,7 +388,7 @@ If the trading range over the last 10 days is <1% or >99%, remove the pair from
"lookback_days": 10,
"min_rate_of_change": 0.01,
"max_rate_of_change": 0.99,
"refresh_period": 1440
"refresh_period": 86400
}
]
```
@@ -431,7 +443,7 @@ The below example blacklists `BNB/BTC`, uses `VolumePairList` with `20` assets,
@@ -24,7 +24,7 @@ The easiest way to install and run Freqtrade is to clone the bot Github reposito
The `stable` branch contains the code of the last release (done usually once per month on an approximately one week old snapshot of the `develop` branch to prevent packaging bugs, so potentially it's more stable).
!!! Note
Python3.8 or higher and the corresponding `pip` are assumed to be available. The install-script will warn you and stop if that's not the case. `git` is also needed to clone the Freqtrade repository.
Python3.9 or higher and the corresponding `pip` are assumed to be available. The install-script will warn you and stop if that's not the case. `git` is also needed to clone the Freqtrade repository.
Also, python headers (`python<yourversion>-dev` / `python<yourversion>-devel`) must be available for the installation to complete successfully.
!!! Warning "Up-to-date clock"
@@ -42,7 +42,7 @@ These requirements apply to both [Script Installation](#script-installation) and
This page explains how to validate your strategy for inaccuracies due to recursive issues with certain indicators.
A recursive formula defines any term of a sequence relative to its preceding term(s). An example of a recursive formula is a<sub>n</sub> = a<sub>n-1</sub> + b.
Why does this matter for Freqtrade? In backtesting, the bot will get full data of the pairs according to the timerange specified. But in a dry/live run, the bot will be limited by the amount of data each exchanges gives.
For example, to calculate a very basic indicator called `steps`, the first row's value is always 0, while the following rows' values are equal to the value of the previous row plus 1. If I were to calculate it using the latest 1000 candles, then the `steps` value of the first row is 0, and the `steps` value at the last closed candle is 999.
What happens if the calculation is using only the latest 500 candles? Then instead of 999, the `steps` value at last closed candle is 499. The difference of the value means your backtest result can differ from your dry/live run result.
The `recursive-analysis` command requires historic data to be available. To learn how to get data for the pairs and exchange you're interested in,
head over to the [Data Downloading](data-download.md) section of the documentation.
This command is built upon preparing different lengths of data and calculates indicators based on them.
This does not backtest the strategy itself, but rather only calculates the indicators. After calculating the indicators of different startup candle values (`startup_candle_count`) are done, the values of last rows across all specified `startup_candle_count` are compared to see how much variance they show compared to the base calculation.
Command settings:
- Use the `-p` option to set your desired pair to analyze. Since we are only looking at indicator values, using more than one pair is redundant. Preferably use a pair with a relatively high price and at least moderate volatility, such as BTC or ETH, to avoid rounding issues that can make the results inaccurate. If no pair is set on the command, the pair used for this analysis is the first pair in the whitelist.
- It is recommended to set a long timerange (at least 5000 candles) so that the initial indicators' calculation that is going to be used as a benchmark has very small or no recursive issues itself. For example, for a 5m timeframe, a timerange of 5000 candles would be equal to 18 days.
- `--cache` is forced to "none" to avoid loading previous indicators calculation automatically.
In addition to the recursive formula check, this command also carries out a simple lookahead bias check on the indicator values only. For a full lookahead check, use [Lookahead-analysis](lookahead-analysis.md).
### Why are odd-numbered default startup candles used?
The default value for startup candles are odd numbers. When the bot fetches candle data from the exchange's API, the last candle is the one being checked by the bot and the rest of the data are the "startup candles".
For example, Binance allows 1000 candles per API call. When the bot receives 1000 candles, the last candle is the "current candle", and the preceding 999 candles are the "startup candles". By setting the startup candle count as 1000 instead of 999, the bot will try to fetch 1001 candles instead. The exchange API will then send candle data in a paginated form, i.e. in case of the Binance API, this will be two groups- one of length 1000 and another of length 1. This results in the bot thinking the strategy needs 1001 candles of data, and so it will download 2000 candles worth of data instead, which means there will be 1 "current candle" and 1999 "startup candles".
Furthermore, exchanges limit the number of consecutive bulk API calls, e.g. Binance allows 5 calls. In this case, only 5000 candles can be downloaded from Binance API without hitting the API rate limit, which means the max `startup_candle_count` you can have is 4999.
Please note that this candle limit may be changed in the future by the exchanges without any prior notice.
### How does the command work?
- Firstly an initial indicator calculation is carried out using the supplied timerange to generate a benchmark for indicator values.
- After setting the benchmark it will then carry out additional runs for each of the different startup candle count values.
- The command will then compare the indicator values at the last candle rows and report the differences in a table.
## Understanding the recursive-analysis output
This is an example of an output results table where at least one indicator has a recursive formula issue:
The column headers indicate the different `startup_candle_count` used in the analysis. The values in the table indicate the variance of the calculated indicators compared to the benchmark value.
`nan%` means the value of that indicator cannot be calculated due to lack of data. In this example, you cannot calculate RSI with length 30 with just 21 candles (1 current candle + 20 startup candles).
Users should assess the table per indicator to decide if the specified `startup_candle_count` results in a sufficiently small variance so that the indicator does not have any effect on entries and/or exits.
As such, aiming for absolute zero variance (shown by `-` value) might not be the best option, because some indicators might require you to use such a long `startup_candle_count` to have zero variance.
## Caveats
- `recursive-analysis` will only calculate and compare the indicator values at the last row. The output table reports the percentage differences between the different startup candle count calculations and the original benchmark calculation. Whether it has any actual impact on your entries and exits is not included.
- The ideal scenario is that indicators will have no variance (or at least very close to 0%) despite the startup candle being varied. In reality, indicators such as EMA are using a recursive formula to calculate indicator values, so the goal is not necessarily to have zero percentage variance, but to have the variance low enough (and therefore `startup_candle_count` high enough) that the recursion inherent in the indicator will not have any real impact on trading decisions.
- `recursive-analysis` will only run calculations on `populate_indicators` and `@informative` decorator(s). If you put any indicator calculation on `populate_entry_trend` or `populate_exit_trend`, it won't be calculated.
| `reload_config` | Reloads the configuration file.
| `trades` | List last trades. Limited to 500 trades per call.
| `trade/<tradeid>` | Get specific trade.
| `trade/<tradeid>` | DELETE - Remove trade from the database. Tries to close open orders. Requires manual handling of this trade on the exchange.
| `trade/<tradeid>/open-order` | DELETE - Cancel open order for this trade.
| `trade/<tradeid>/reload` | GET - Reload a trade from the Exchange. Only works in live, and can potentially help recover a trade that was manually sold on the exchange.
| `trades/<tradeid>` | DELETE - Remove trade from the database. Tries to close open orders. Requires manual handling of this trade on the exchange.
| `trades/<tradeid>/open-order` | DELETE - Cancel open order for this trade.
| `trades/<tradeid>/reload` | GET - Reload a trade from the Exchange. Only works in live, and can potentially help recover a trade that was manually sold on the exchange.
| `show_config` | Shows part of the current configuration with relevant settings to operation.
| `logs` | Shows last log messages.
| `status` | Lists all open trades.
| `count` | Displays number of trades used and available.
| `entries [pair]` | Shows profit statistics for each enter tags for given pair (or all pairs if pair isn't given). Pair is optional.
| `exits [pair]` | Shows profit statistics for each exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.
| `mix_tags [pair]` | Shows profit statistics for each combinations of enter tag + exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.
| `locks` | Displays currently locked pairs.
| `delete_lock <lock_id>` | Deletes (disables) the lock by id.
| `profit` | Display a summary of your profit/loss from close trades and some stats about your performance.
@@ -164,6 +164,31 @@ E.g. If the `current_rate` is 200 USD, then returning `0.02` will set the stoplo
During backtesting, `current_rate` (and `current_profit`) are provided against the candle's high (or low for short trades) - while the resulting stoploss is evaluated against the candle's low (or high for short trades).
The absolute value of the return value is used (the sign is ignored), so returning `0.05` or `-0.05` have the same result, a stoploss 5% below the current price.
Returning None will be interpreted as "no desire to change", and is the only safe way to return when you'd like to not modify the stoploss.
Stoploss on exchange works similar to `trailing_stop`, and the stoploss on exchange is updated as configured in `stoploss_on_exchange_interval` ([More details about stoploss on exchange](stoploss.md#stop-loss-on-exchange-freqtrade)).
!!! Note "Use of dates"
All time-based calculations should be done based on `current_time` - using `datetime.now()` or `datetime.utcnow()` is discouraged, as this will break backtesting support.
!!! Tip "Trailing stoploss"
It's recommended to disable `trailing_stop` when using custom stoploss values. Both can work in tandem, but you might encounter the trailing stop to move the price higher while your custom function would not want this, causing conflicting behavior.
### Adjust stoploss after position adjustments
Depending on your strategy, you may encounter the need to adjust the stoploss in both directions after a [position adjustment](#adjust-trade-position).
For this, freqtrade will make an additional call with `after_fill=True` after an order fills, which will allow the strategy to move the stoploss in any direction (also widening the gap between stoploss and current price, which is otherwise forbidden).
!!! Note "backwards compatibility"
This call will only be made if the `after_fill` parameter is part of the function definition of your `custom_stoploss` function.
As such, this will not impact (and with that, surprise) existing, running strategies.
### Custom stoploss examples
The next section will show some examples on what's possible with the custom stoploss function.
Of course, many more things are possible, and all examples can be combined at will.
#### Trailing stop via custom stoploss
To simulate a regular trailing stoploss of 4% (trailing 4% behind the maximum reached price) you would use the following very simple method:
@@ -179,7 +204,8 @@ class AwesomeStrategy(IStrategy):
Custom stoploss logic, returning the new distance relative to current_rate (as ratio).
e.g. returning -0.05 would create a stoploss 5% below current_rate.
@@ -187,7 +213,7 @@ class AwesomeStrategy(IStrategy):
For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/
When not implemented by a strategy, returns the initial stoploss value
When not implemented by a strategy, returns the initial stoploss value.
Only called when use_custom_stoploss is set to True.
:param pair: Pair that's currently analyzed
@@ -195,25 +221,13 @@ class AwesomeStrategy(IStrategy):
:param current_time: datetime object, containing the current datetime
:param current_rate: Rate, calculated based on pricing settings in exit_pricing.
:param current_profit: Current profit (as ratio), calculated based on current_rate.
:param after_fill: True if the stoploss is called after the order was filled.
:param **kwargs: Ensure to keep this here so updates to this won't break your strategy.
:return float: New stoploss value, relative to the currentrate
:return float: New stoploss value, relative to the current_rate
"""
return -0.04
```
Stoploss on exchange works similar to `trailing_stop`, and the stoploss on exchange is updated as configured in `stoploss_on_exchange_interval` ([More details about stoploss on exchange](stoploss.md#stop-loss-on-exchange-freqtrade)).
!!! Note "Use of dates"
All time-based calculations should be done based on `current_time` - using `datetime.now()` or `datetime.utcnow()` is discouraged, as this will break backtesting support.
!!! Tip "Trailing stoploss"
It's recommended to disable `trailing_stop` when using custom stoploss values. Both can work in tandem, but you might encounter the trailing stop to move the price higher while your custom function would not want this, causing conflicting behavior.
### Custom stoploss examples
The next section will show some examples on what's possible with the custom stoploss function.
Of course, many more things are possible, and all examples can be combined at will.
#### Time based trailing stop
Use the initial stoploss for the first 60 minutes, after this change to 10% trailing stoploss, and after 2 hours (120 minutes) we use a 5% trailing stoploss.
@@ -229,14 +243,45 @@ class AwesomeStrategy(IStrategy):
#### Time based trailing stop with after-fill adjustments
Use the initial stoploss for the first 60 minutes, after this change to 10% trailing stoploss, and after 2 hours (120 minutes) we use a 5% trailing stoploss.
If an additional order fills, set stoploss to -10% below the new `open_rate` ([Averaged across all entries](#position-adjust-calculations)).
# return maximum stoploss value, keeping current stoploss price unchanged
return 1
return None
```
See [Dataframe access](strategy-advanced.md#dataframe-access) for more information about dataframe use in strategy callbacks.
@@ -364,15 +413,89 @@ See [Dataframe access](strategy-advanced.md#dataframe-access) for more informati
#### Stoploss relative to open price
Stoploss values returned from `custom_stoploss()`always specify a percentage relative to `current_rate`. In order to set a stoploss relative to the *open* price, we need to use `current_profit` to calculate what percentage relative to the `current_rate` will give you the same result as if the percentage was specified from the open price.
Stoploss values returned from `custom_stoploss()`must specify a percentage relative to `current_rate`, but sometimes you may want to specify a stoploss relative to the _entry_ price instead.
`stoploss_from_open()` is a helper function to calculate a stoploss value that can be returned from `custom_stoploss` which will be equivalent to the desired trade profit above the entry point.
The helper function [`stoploss_from_open()`](strategy-customization.md#stoploss_from_open) can be used to convert from an open price relative stop, to a current price relative stop which can be returned from `custom_stoploss()`.
??? Example "Returning a stoploss relative to the open price from the customstoploss function"
Say the open price was $100, and `current_price` is $121 (`current_profit` will be `0.21`).
If we want a stop price at 7% above the open price we can call `stoploss_from_open(0.07, current_profit, False)` which will return `0.1157024793`. 11.57% below $121 is $107, which is the same as 7% above $100.
This function will consider leverage - so at 10x leverage, the actual stoploss would be 0.7% above $100 (0.7% * 10x = 7%).
``` python
from datetime import datetime
from freqtrade.persistence import Trade
from freqtrade.strategy import IStrategy, stoploss_from_open
Full examples can be found in the [Custom stoploss](strategy-advanced.md#custom-stoploss) section of the Documentation.
!!! Note
Providing invalid input to `stoploss_from_open()` may produce "CustomStoploss function did not return valid stoploss" warnings.
This may happen if `current_profit` parameter is below specified `open_relative_stop`. Such situations may arise when closing trade
is blocked by `confirm_trade_exit()` method. Warnings can be solved by never blocking stop loss sells by checking `exit_reason` in
`confirm_trade_exit()`, or by using `return stoploss_from_open(...) or 1` idiom, which will request to not change stop loss when
`current_profit < open_relative_stop`.
#### Stoploss percentage from absolute price
Stoploss values returned from `custom_stoploss()` always specify a percentage relative to `current_rate`. In order to set a stoploss at specified absolute price level, we need to use `stop_rate` to calculate what percentage relative to the `current_rate` will give you the same result as if the percentage was specified from the open price.
The helper function [`stoploss_from_absolute()`](strategy-customization.md#stoploss_from_absolute) can be used to convert from an absolute price, to a current price relative stop which can be returned from `custom_stoploss()`.
The helper function `stoploss_from_absolute()` can be used to convert from an absolute price, to a current price relative stop which can be returned from `custom_stoploss()`.
??? Example "Returning a stoploss using absolute price from the custom stoploss function"
If we want to trail a stop price at 2xATR below current price we can call `stoploss_from_absolute(current_rate + (side * candle['atr'] * 2), current_rate, is_short=trade.is_short, leverage=trade.leverage)`.
For futures, we need to adjust the direction (up or down), as well as adjust for leverage, since the [`custom_stoploss`](strategy-callbacks.md#custom-stoploss) callback returns the ["risk for this trade"](stoploss.md#stoploss-and-leverage) - not the relative price movement.
``` python
from datetime import datetime
from freqtrade.persistence import Trade
from freqtrade.strategy import IStrategy, stoploss_from_absolute, timeframe_to_prev_date
@@ -387,6 +510,9 @@ Each of these methods are called right before placing an order on the exchange.
!!! Note
If your custom pricing function return None or an invalid value, price will fall back to `proposed_rate`, which is based on the regular pricing configuration.
!!! Note
Using custom_entry_price, the Trade object will be available as soon as the first entry order associated with the trade is created, for the first entry, `trade` parameter value will be `None`.
### Custom order entry and exit price example
``` python
@@ -397,7 +523,7 @@ class AwesomeStrategy(IStrategy):
@@ -634,9 +760,9 @@ The `position_adjustment_enable` strategy property enables the usage of `adjust_
For performance reasons, it's disabled by default and freqtrade will show a warning message on startup if enabled.
`adjust_trade_position()` can be used to perform additional orders, for example to manage risk with DCA (Dollar Cost Averaging) or to increase or decrease positions.
`max_entry_position_adjustment` property is used to limit the number of additional buys per trade (on top of the first buy) that the bot can execute. By default, the value is -1 which means the bot have no limit on number of adjustment buys.
`max_entry_position_adjustment` property is used to limit the number of additional entries per trade (on top of the first entry order) that the bot can execute. By default, the value is -1 which means the bot have no limit on number of adjustment entries.
The strategy is expected to return a stake_amount (in stake currency) between `min_stake` and `max_stake` if and when an additional buy order should be made (position is increased).
The strategy is expected to return a stake_amount (in stake currency) between `min_stake` and `max_stake` if and when an additional entry order should be made (position is increased -> buy order for long trades, sell order for short trades).
If there are not enough funds in the wallet (the return value is above `max_stake`) then the signal will be ignored.
Additional orders also result in additional fees and those orders don't count towards `max_open_trades`.
@@ -644,9 +770,11 @@ This callback is **not** called when there is an open order (either buy or sell)
`adjust_trade_position()` is called very frequently for the duration of a trade, so you must keep your implementation as performant as possible.
Additional Buys are ignored once you have reached the maximum amount of extra buys that you have set on `max_entry_position_adjustment`, but the callback is called anyway looking for partial exits.
Additional entries are ignored once you have reached the maximum amount of extra entries that you have set on `max_entry_position_adjustment`, but the callback is called anyway looking for partial exits.
Position adjustments will always be applied in the direction of the trade, so a positive value will always increase your position (negative values will decrease your position), no matter if it's a long or short trade. Modifications to leverage are not possible, and the stake-amount is assumed to be before applying leverage.
Position adjustments will always be applied in the direction of the trade, so a positive value will always increase your position (negative values will decrease your position), no matter if it's a long or short trade.
Modifications to leverage are not possible, and the stake-amount returned is assumed to be before applying leverage.
!!! Note "About stake size"
Using fixed stake size means it will be the amount used for the first order, just like without position adjustment.
@@ -700,7 +828,7 @@ class DigDeeperStrategy(IStrategy):
"""
Custom trade adjustment logic, returning the stake amount that a trade should be
increased or decreased.
This means extra buy or sell orders with additional fees.
This means extra entry or exit orders with additional fees.
Only called when `position_adjustment_enable` is set to True.
For full documentation please go to https://www.freqtrade.io/en/latest/strategy-advanced/
@@ -709,8 +837,9 @@ class DigDeeperStrategy(IStrategy):
:param trade: trade object.
:param current_time: datetime object, containing the current datetime
:param current_rate: Current buy rate.
:param current_profit: Current profit (as ratio), calculated based on current_rate.
:param current_rate: Current entry rate (same as current_entry_profit)
:param current_profit: Current profit (as ratio), calculated based on current_rate
(same as current_entry_profit).
:param min_stake: Minimal stake size allowed by exchange (for both entries and exits)
:param max_stake: Maximum stake allowed (either through balance, or by exchange limits).
:param current_entry_rate: Current rate using entry pricing.
@@ -793,6 +922,8 @@ Returning any other price will cancel the existing order, and replace it with a
The trade open-date (`trade.open_date_utc`) will remain at the time of the very first order placed.
Please make sure to be aware of this - and eventually adjust your logic in other callbacks to account for this, and use the date of the first filled order instead.
If the cancellation of the original order fails, then the order will not be replaced - though the order will most likely have been canceled on exchange. Having this happen on initial entries will result in the deletion of the order, while on position adjustment orders, it'll result in the trade size remaining as is.
!!! Warning "Regular timeout"
Entry `unfilledtimeout` mechanism (as well as `check_entry_timeout()`) takes precedence over this.
Entry Orders that are cancelled via the above methods will not have this callback called. Be sure to update timeout values to match your expectations.
@@ -168,7 +168,9 @@ Most indicators have an instable startup period, in which they are either not av
To account for this, the strategy can be assigned the `startup_candle_count` attribute.
This should be set to the maximum number of candles that the strategy requires to calculate stable indicators. In the case where a user includes higher timeframes with informative pairs, the `startup_candle_count` does not necessarily change. The value is the maximum period (in candles) that any of the informatives timeframes need to compute stable indicators.
In this example strategy, this should be set to 100 (`startup_candle_count = 100`), since the longest needed history is 100 candles.
You can use [recursive-analysis](recursive-analysis.md) to check and find the correct `startup_candle_count` to be used.
In this example strategy, this should be set to 400 (`startup_candle_count = 400`), since the minimum needed history for ema100 calculation to make sure the value is correct is 400 candles.
Assuming `startup_candle_count` is set to 100, backtesting knows it needs 100 candles to generate valid buy signals. It will load data from `20190101 - (100 * 5m)` - which is ~2018-12-31 15:30:00.
Assuming `startup_candle_count` is set to 400, backtesting knows it needs 400 candles to generate valid buy signals. It will load data from `20190101 - (400 * 5m)` - which is ~2018-12-30 11:40:00.
If this data is available, indicators will be calculated with this extended timerange. The instable startup period (up to 2019-01-01 00:00:00) will then be removed before starting backtesting.
!!! Note
If data for the startup period is not available, then the timerange will be adjusted to account for this startup period - so Backtesting would start at 2019-01-01 08:30:00.
If data for the startup period is not available, then the timerange will be adjusted to account for this startup period - so Backtesting would start at 2019-01-02 09:20:00.
Edit the method `populate_exit_trend()` into your strategy file to update your exit strategy.
The exit-signal is only used for exits if`use_exit_signal`is set to true in the configuration.
The exit-signal can be suppressed by setting`use_exit_signal`to false in the configuration or strategy.
`use_exit_signal` will not influence [signal collision rules](#colliding-signals) - which will still apply and can prevent entries.
It's important to always return the dataframe without removing/modifying the columns `"open", "high", "low", "close", "volume"`, otherwise these fields would contain something unexpected.
@@ -484,17 +486,18 @@ for more information.
:param timeframe: Informative timeframe. Must always be equal or higher than strategy timeframe.
:param asset: Informative asset, for example BTC, BTC/USDT, ETH/BTC. Do not specify to use
current pair.
current pair. Also supports limited pair format strings (see below)
:param fmt: Column format (str) or column formatter (callable(name, asset, timeframe)). When not
specified, defaults to:
* {base}_{quote}_{column}_{timeframe} if asset is specified.
* {base}_{quote}_{column}_{timeframe} if asset is specified.
* {column}_{timeframe} if asset is not specified.
Format string supports these format variables:
* {asset} - full name of the asset, for example 'BTC/USDT'.
Pair format supports these format variables:
* {base} - base currency in lower case, for example 'eth'.
* {BASE} - same as {base}, except in upper case.
* {quote} - quote currency in lower case, for example 'usdt'.
* {QUOTE} - same as {quote}, except in upper case.
Format string additionally supports this variables.
* {asset} - full name of the asset, for example 'BTC/USDT'.
* {column} - name of dataframe column.
* {timeframe} - timeframe of informative dataframe.
:param ffill: ffill dataframe after merging informative pair.
@@ -586,6 +589,67 @@ for more information.
will overwrite previously defined method and not produce any errors due to limitations of Python programming language. In such cases you will find that indicators
created in earlier-defined methods are not available in the dataframe. Carefully review method names and make sure they are unique!
### *merge_informative_pair()*
This method helps you merge an informative pair to a regular dataframe without lookahead bias.
It's there to help you merge the dataframe in a safe and consistent way.
Options:
- Rename the columns for you to create unique columns
- Merge the dataframe without lookahead bias
- Forward-fill (optional)
For a full sample, please refer to the [complete data provider example](#complete-data-provider-sample) below.
All columns of the informative dataframe will be available on the returning dataframe in a renamed fashion:
!!! Example "Column renaming"
Assuming `inf_tf = '1d'` the resulting columns will be:
``` python
'date', 'open', 'high', 'low', 'close', 'rsi' # from the original dataframe
'date_1d', 'open_1d', 'high_1d', 'low_1d', 'close_1d', 'rsi_1d' # from the informative dataframe
```
??? Example "Column renaming - 1h"
Assuming `inf_tf = '1h'` the resulting columns will be:
``` python
'date', 'open', 'high', 'low', 'close', 'rsi' # from the original dataframe
'date_1h', 'open_1h', 'high_1h', 'low_1h', 'close_1h', 'rsi_1h' # from the informative dataframe
```
??? Example "Custom implementation"
A custom implementation for this is possible, and can be done as follows:
``` python
# Shift date by 1 candle
# This is necessary since the data is always the "open date"
# and a 15m candle starting at 12:15 should not know the close of the 1h candle from 12:00 to 13:00
# FFill to have the 1d value available in every row throughout the day.
# Without this, comparisons would only work once per day.
dataframe = dataframe.ffill()
```
!!! Warning "Informative timeframe < timeframe"
Using informative timeframes smaller than the dataframe timeframe is not recommended with this method, as it will not use any of the additional information this would provide.
To use the more detailed information properly, more advanced methods should be applied (which are out of scope for freqtrade documentation, as it'll depend on the respective need).
## Additional data (DataProvider)
The strategy provides access to the `DataProvider`. This allows you to get additional data to use in your strategy.
@@ -810,146 +874,6 @@ class SampleStrategy(IStrategy):
***
## Helper functions
### *merge_informative_pair()*
This method helps you merge an informative pair to a regular dataframe without lookahead bias.
It's there to help you merge the dataframe in a safe and consistent way.
Options:
- Rename the columns for you to create unique columns
- Merge the dataframe without lookahead bias
- Forward-fill (optional)
For a full sample, please refer to the [complete data provider example](#complete-data-provider-sample) below.
All columns of the informative dataframe will be available on the returning dataframe in a renamed fashion:
!!! Example "Column renaming"
Assuming `inf_tf = '1d'` the resulting columns will be:
``` python
'date', 'open', 'high', 'low', 'close', 'rsi' # from the original dataframe
'date_1d', 'open_1d', 'high_1d', 'low_1d', 'close_1d', 'rsi_1d' # from the informative dataframe
```
??? Example "Column renaming - 1h"
Assuming `inf_tf = '1h'` the resulting columns will be:
``` python
'date', 'open', 'high', 'low', 'close', 'rsi' # from the original dataframe
'date_1h', 'open_1h', 'high_1h', 'low_1h', 'close_1h', 'rsi_1h' # from the informative dataframe
```
??? Example "Custom implementation"
A custom implementation for this is possible, and can be done as follows:
``` python
# Shift date by 1 candle
# This is necessary since the data is always the "open date"
# and a 15m candle starting at 12:15 should not know the close of the 1h candle from 12:00 to 13:00
# FFill to have the 1d value available in every row throughout the day.
# Without this, comparisons would only work once per day.
dataframe = dataframe.ffill()
```
!!! Warning "Informative timeframe < timeframe"
Using informative timeframes smaller than the dataframe timeframe is not recommended with this method, as it will not use any of the additional information this would provide.
To use the more detailed information properly, more advanced methods should be applied (which are out of scope for freqtrade documentation, as it'll depend on the respective need).
***
### *stoploss_from_open()*
Stoploss values returned from `custom_stoploss` must specify a percentage relative to `current_rate`, but sometimes you may want to specify a stoploss relative to the entry point instead. `stoploss_from_open()` is a helper function to calculate a stoploss value that can be returned from `custom_stoploss` which will be equivalent to the desired trade profit above the entry point.
??? Example "Returning a stoploss relative to the open price from the custom stoploss function"
Say the open price was $100, and `current_price` is $121 (`current_profit` will be `0.21`).
If we want a stop price at 7% above the open price we can call `stoploss_from_open(0.07, current_profit, False)` which will return `0.1157024793`. 11.57% below $121 is $107, which is the same as 7% above $100.
This function will consider leverage - so at 10x leverage, the actual stoploss would be 0.7% above $100 (0.7% * 10x = 7%).
``` python
from datetime import datetime
from freqtrade.persistence import Trade
from freqtrade.strategy import IStrategy, stoploss_from_open
Full examples can be found in the [Custom stoploss](strategy-advanced.md#custom-stoploss) section of the Documentation.
!!! Note
Providing invalid input to `stoploss_from_open()` may produce "CustomStoploss function did not return valid stoploss" warnings.
This may happen if `current_profit` parameter is below specified `open_relative_stop`. Such situations may arise when closing trade
is blocked by `confirm_trade_exit()` method. Warnings can be solved by never blocking stop loss sells by checking `exit_reason` in
`confirm_trade_exit()`, or by using `return stoploss_from_open(...) or 1` idiom, which will request to not change stop loss when
`current_profit < open_relative_stop`.
### *stoploss_from_absolute()*
In some situations it may be confusing to deal with stops relative to current rate. Instead, you may define a stoploss level using an absolute price.
??? Example "Returning a stoploss using absolute price from the custom stoploss function"
If we want to trail a stop price at 2xATR below current price we can call `stoploss_from_absolute(current_rate - (candle['atr'] * 2), current_rate, is_short=trade.is_short)`.
``` python
from datetime import datetime
from freqtrade.persistence import Trade
from freqtrade.strategy import IStrategy, stoploss_from_absolute
The strategy provides access to the `wallets` object. This contains the current balances on the exchange.
@@ -1085,6 +1009,10 @@ The following lists some common patterns which should be avoided to prevent frus
- don't use `dataframe['volume'].mean()`. This uses the full DataFrame for backtesting, including data from the future. Use `dataframe['volume'].rolling(<window>).mean()` instead
- don't use `.resample('1h')`. This uses the left border of the interval, so moves data from an hour to the start of the hour. Use `.resample('1h', label='right')` instead.
!!! Tip "Identifying problems"
You may also want to check the 2 helper commands [lookahead-analysis](lookahead-analysis.md) and [recursive-analysis](recursive-analysis.md), which can each help you figure out problems with your strategy in different ways.
Please treat them as what they are - helpers to identify most common problems. A negative result of each does not guarantee that there's none of the above errors included.
### Colliding signals
When conflicting signals collide (e.g. both `'enter_long'` and `'exit_long'` are 1), freqtrade will do nothing and ignore the entry signal. This will avoid trades that enter, and exit immediately. Obviously, this can potentially lead to missed entries.
@@ -175,6 +175,7 @@ official commands. You can ask at any moment for help with `/help`.
| `/status` | Lists all open trades
| `/status <trade_id>` | Lists one or more specific trade. Separate multiple <trade_id> with a blank space.
| `/status table` | List all open trades in a table format. Pending buy orders are marked with an asterisk (*) Pending sell orders are marked with a double asterisk (**)
| `/order <trade_id>` | Lists orders of one or more specific trade. Separate multiple <trade_id> with a blank space.
| `/trades [limit]` | List all recently closed trades in a table format.
| `/count` | Displays number of trades used and available
@@ -302,6 +302,7 @@ You can configure this as follows:
```
The above represents the default (`exit_fill` and `entry_fill` are optional and will default to the above configuration) - modifications are obviously possible.
To disable either of the two default values (`entry_fill` / `exit_fill`), you can assign them an empty array (`exit_fill: []`).
Available fields correspond to the fields for webhooks and are documented in the corresponding webhook sections.
Install ta-lib according to the [ta-lib documentation](https://github.com/mrjbq7/ta-lib#windows).
As compiling from source on windows has heavy dependencies (requires a partial visual studio installation), Freqtrade provides these dependencies (in the binary wheel format) for the latest 3 Python versions (3.8, 3.9, 3.10 and 3.11) and for 64bit Windows.
As compiling from source on windows has heavy dependencies (requires a partial visual studio installation), Freqtrade provides these dependencies (in the binary wheel format) for the latest 3 Python versions (3.9, 3.10 and 3.11) and for 64bit Windows.
These Wheels are also used by CI running on windows, and are therefore tested together with freqtrade.
Other versions must be downloaded from the above link.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Matthias