Merge pull request #11307 from freqtrade/new_release

New release 2025.1

.github/workflows/ci.yml

@@ -35,6 +35,15 @@ jobs:
       with:
         python-version: ${{ matrix.python-version }}
 
+    - name: Install uv
+      uses: astral-sh/setup-uv@v5
+      with:
+        enable-cache: true
+        python-version: ${{ matrix.python-version }}
+        cache-dependency-glob: "requirements**.txt"
+        cache-suffix: "${{ matrix.python-version }}"
+        prune-cache: false
+
     - name: Cache_dependencies
       uses: actions/cache@v4
       id: cache
@@ -42,12 +51,6 @@ jobs:
         path: ~/dependencies/
         key: ${{ runner.os }}-dependencies
 
-    - name: pip cache (linux)
-      uses: actions/cache@v4
-      with:
-        path: ~/.cache/pip
-        key: pip-${{ matrix.python-version }}-ubuntu
-
     - name: TA binary *nix
       if: steps.cache.outputs.cache-hit != 'true'
       run: |
@@ -55,13 +58,13 @@ jobs:
 
     - name: Installation - *nix
       run: |
-        python -m pip install --upgrade pip wheel
+        uv pip install --upgrade wheel
         export LD_LIBRARY_PATH=${HOME}/dependencies/lib:$LD_LIBRARY_PATH
         export TA_LIBRARY_PATH=${HOME}/dependencies/lib
         export TA_INCLUDE_PATH=${HOME}/dependencies/include
-        pip install -r requirements-dev.txt
-        pip install -e ft_client/
-        pip install -e .
+        uv pip install -r requirements-dev.txt
+        uv pip install -e ft_client/
+        uv pip install -e .
 
     - name: Check for version alignment
       run: |
@@ -91,6 +94,11 @@ jobs:
       run: |
         python build_helpers/extract_config_json_schema.py
 
+    - name: Run command docs partials extract
+      # This should be kept before the repository check to ensure that the docs are up-to-date
+      run: |
+        python build_helpers/create_command_partials.py
+
     - name: Check for repository changes
       run: |
         if [ -n "$(git status --porcelain)" ]; then
@@ -156,6 +164,15 @@ jobs:
         python-version: ${{ matrix.python-version }}
         check-latest: true
 
+    - name: Install uv
+      uses: astral-sh/setup-uv@v5
+      with:
+        enable-cache: true
+        python-version: ${{ matrix.python-version }}
+        cache-dependency-glob: "requirements**.txt"
+        cache-suffix: "${{ matrix.python-version }}"
+        prune-cache: false
+
     - name: Cache_dependencies
       uses: actions/cache@v4
       id: cache
@@ -163,12 +180,6 @@ jobs:
         path: ~/dependencies/
         key: ${{ matrix.os }}-dependencies
 
-    - name: pip cache (macOS)
-      uses: actions/cache@v4
-      with:
-        path: ~/Library/Caches/pip
-        key: pip-${{ matrix.os }}-${{ matrix.python-version }}
-
     - name: TA binary *nix
       if: steps.cache.outputs.cache-hit != 'true'
       run: |
@@ -200,13 +211,13 @@ jobs:
 
     - name: Installation (python)
       run: |
-        python -m pip install --upgrade pip wheel
+        uv pip install wheel
         export LD_LIBRARY_PATH=${HOME}/dependencies/lib:$LD_LIBRARY_PATH
         export TA_LIBRARY_PATH=${HOME}/dependencies/lib
         export TA_INCLUDE_PATH=${HOME}/dependencies/include
-        pip install -r requirements-dev.txt
-        pip install -e ft_client/
-        pip install -e .
+        uv pip install -r requirements-dev.txt
+        uv pip install -e ft_client/
+        uv pip install -e .
 
     - name: Tests
       run: |
@@ -276,19 +287,25 @@ jobs:
       with:
         python-version: ${{ matrix.python-version }}
 
-    - name: Pip cache (Windows)
-      uses: actions/cache@v4
+    - name: Install uv
+      uses: astral-sh/setup-uv@v5
       with:
-        path: ~\AppData\Local\pip\Cache
-        key: pip-${{ matrix.os }}-${{ matrix.python-version }}
+        enable-cache: true
+        python-version: ${{ matrix.python-version }}
+        cache-dependency-glob: "requirements**.txt"
+        cache-suffix: "${{ matrix.python-version }}"
+        prune-cache: false
 
     - name: Installation
       run: |
+        function uvpipFunction { uv pip $args }
+        Set-Alias -name pip -value uvpipFunction
+
         ./build_helpers/install_windows.ps1
 
     - name: Tests
       run: |
-        pytest --random-order
+        pytest --random-order --durations 20 -n auto
 
     - name: Check for repository changes
       run: |
@@ -409,6 +426,15 @@ jobs:
       with:
         python-version: "3.12"
 
+    - name: Install uv
+      uses: astral-sh/setup-uv@v5
+      with:
+        enable-cache: true
+        python-version: "3.12"
+        cache-dependency-glob: "requirements**.txt"
+        cache-suffix: "3.12"
+        prune-cache: false
+
     - name: Cache_dependencies
       uses: actions/cache@v4
       id: cache
@@ -416,11 +442,6 @@ jobs:
         path: ~/dependencies/
         key: ${{ runner.os }}-dependencies
 
-    - name: pip cache (linux)
-      uses: actions/cache@v4
-      with:
-        path: ~/.cache/pip
-        key: pip-3.12-ubuntu
 
     - name: TA binary *nix
       if: steps.cache.outputs.cache-hit != 'true'
@@ -429,13 +450,13 @@ jobs:
 
     - name: Installation - *nix
       run: |
-        python -m pip install --upgrade pip wheel
+        uv pip install --upgrade wheel
         export LD_LIBRARY_PATH=${HOME}/dependencies/lib:$LD_LIBRARY_PATH
         export TA_LIBRARY_PATH=${HOME}/dependencies/lib
         export TA_INCLUDE_PATH=${HOME}/dependencies/include
-        pip install -r requirements-dev.txt
-        pip install -e ft_client/
-        pip install -e .
+        uv pip install -r requirements-dev.txt
+        uv pip install -e ft_client/
+        uv pip install -e .
 
     - name: Tests incl. ccxt compatibility tests
       env:
@@ -517,13 +538,40 @@ jobs:
           ft_client/dist
         retention-days: 10
 
-  deploy-pypi:
-    name: "Deploy to PyPI"
+  deploy-test-pypi:
+    name: "Publish Python 🐍 distribution 📦 to TestPyPI"
     needs: [ build ]
     runs-on: ubuntu-22.04
     if: (github.event_name == 'release')
     environment:
-      name: release
+      name: testpypi
+      url: https://test.pypi.org/p/freqtrade
+    permissions:
+      id-token: write
+
+    steps:
+    - uses: actions/checkout@v4
+
+    - name: Download artifact  📦
+      uses: actions/download-artifact@v4
+      with:
+        pattern: freqtrade*-build
+        path: dist
+        merge-multiple: true
+
+    - name: Publish to PyPI (Test)
+      uses: pypa/gh-action-pypi-publish@v1.12.4
+      with:
+        repository-url: https://test.pypi.org/legacy/
+
+
+  deploy-pypi:
+    name: "Publish Python 🐍 distribution 📦 to PyPI"
+    needs: [ build ]
+    runs-on: ubuntu-22.04
+    if: (github.event_name == 'release')
+    environment:
+      name: pypi
       url: https://pypi.org/p/freqtrade
     permissions:
       id-token: write
@@ -538,14 +586,8 @@ jobs:
         path: dist
         merge-multiple: true
 
-
-    - name: Publish to PyPI (Test)
-      uses: pypa/gh-action-pypi-publish@v1.12.2
-      with:
-        repository-url: https://test.pypi.org/legacy/
-
     - name: Publish to PyPI
-      uses: pypa/gh-action-pypi-publish@v1.12.2
+      uses: pypa/gh-action-pypi-publish@v1.12.4
 
 
   deploy-docker:

.pre-commit-config.yaml

@@ -9,7 +9,7 @@ repos:
         # stages: [push]
 
   - repo: https://github.com/pre-commit/mirrors-mypy
-    rev: "v1.13.0"
+    rev: "v1.14.1"
     hooks:
       - id: mypy
         exclude: build_helpers
@@ -17,13 +17,13 @@ repos:
           - types-cachetools==5.5.0.20240820
           - types-filelock==3.2.7
           - types-requests==2.32.0.20241016
-          - types-tabulate==0.9.0.20240106
-          - types-python-dateutil==2.9.0.20241003
-          - SQLAlchemy==2.0.36
+          - types-tabulate==0.9.0.20241207
+          - types-python-dateutil==2.9.0.20241206
+          - SQLAlchemy==2.0.37
         # stages: [push]
 
   - repo: https://github.com/pycqa/isort
-    rev: "5.13.2"
+    rev: "6.0.0"
     hooks:
       - id: isort
         name: isort (python)
@@ -31,7 +31,7 @@ repos:
 
   - repo: https://github.com/charliermarsh/ruff-pre-commit
     # Ruff version.
-    rev: 'v0.8.0'
+    rev: 'v0.9.3'
     hooks:
       - id: ruff
       - id: ruff-format
@@ -56,8 +56,13 @@ repos:
                 .*\.md
             )$
 
+  - repo: https://github.com/stefmolin/exif-stripper
+    rev: 0.6.1
+    hooks:
+      - id: strip-exif
+
   - repo: https://github.com/codespell-project/codespell
-    rev: v2.3.0
+    rev: v2.4.0
     hooks:
     - id: codespell
       additional_dependencies:

Dockerfile

@@ -11,7 +11,7 @@ ENV FT_APP_ENV="docker"
 # Prepare environment
 RUN mkdir /freqtrade \
   && apt-get update \
-  && apt-get -y install sudo libatlas3-base curl sqlite3 libhdf5-serial-dev libgomp1 \
+  && apt-get -y install sudo libatlas3-base curl sqlite3 libgomp1 \
   && apt-get clean \
   && useradd -u 1000 -G sudo -U -m -s /bin/bash ftuser \
   && chown ftuser:ftuser /freqtrade \

README.md

@@ -32,10 +32,11 @@ Please read the [exchange specific notes](docs/exchanges.md) to learn about even
 - [X] [BingX](https://bingx.com/invite/0EM9RX)
 - [X] [Bybit](https://bybit.com/)
 - [X] [Gate.io](https://www.gate.io/ref/6266643)
-- [X] [HTX](https://www.htx.com/) (Former Huobi)
+- [X] [HTX](https://www.htx.com/)
 - [X] [Hyperliquid](https://hyperliquid.xyz/) (A decentralized exchange, or DEX)
 - [X] [Kraken](https://kraken.com/)
-- [X] [OKX](https://okx.com/) (Former OKEX)
+- [X] [OKX](https://okx.com/)
+- [X] [MyOKX](https://okx.com/) (OKX EEA)
 - [ ] [potentially many others](https://github.com/ccxt/ccxt/). _(We cannot guarantee they will work)_
 
 ### Supported Futures Exchanges (experimental)
@@ -89,13 +90,13 @@ For further (native) installation methods, please refer to the [Installation doc
 
 ```
 usage: freqtrade [-h] [-V]
-                 {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}
+                 {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-hyperoptloss,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}
                  ...
 
 Free, open source crypto trading bot
 
 positional arguments:
-  {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}
+  {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-hyperoptloss,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}
     trade               Trade module.
     create-userdir      Create user-data directory.
     new-config          Create new config
@@ -119,6 +120,7 @@ positional arguments:
     list-markets        Print markets on exchange.
     list-pairs          Print pairs on exchange.
     list-strategies     Print available strategies.
+    list-hyperoptloss   Print available hyperopt loss functions.
     list-freqaimodels   Print available freqAI models.
     list-timeframes     Print available timeframes for the exchange.
     show-trades         Show trades.
@@ -135,7 +137,6 @@ positional arguments:
 options:
   -h, --help            show this help message and exit
   -V, --version         show program's version number and exit
-
 ```
 
 ### Telegram RPC commands

build_helpers/create_command_partials.py

@@ -0,0 +1,53 @@
+import subprocess
+from pathlib import Path
+
+
+subcommands = [
+    "trade",
+    "create-userdir",
+    "new-config",
+    "show-config",
+    "new-strategy",
+    "download-data",
+    "convert-data",
+    "convert-trade-data",
+    "trades-to-ohlcv",
+    "list-data",
+    "backtesting",
+    "backtesting-show",
+    "backtesting-analysis",
+    "edge",
+    "hyperopt",
+    "hyperopt-list",
+    "hyperopt-show",
+    "list-exchanges",
+    "list-markets",
+    "list-pairs",
+    "list-strategies",
+    "list-hyperoptloss",
+    "list-freqaimodels",
+    "list-timeframes",
+    "show-trades",
+    "test-pairlist",
+    "convert-db",
+    "install-ui",
+    "plot-dataframe",
+    "plot-profit",
+    "webserver",
+    "strategy-updater",
+    "lookahead-analysis",
+    "recursive-analysis",
+]
+
+result = subprocess.run(["freqtrade", "--help"], capture_output=True, text=True)
+
+with Path("docs/commands/main.md").open("w") as f:
+    f.write(f"```\n{result.stdout}\n```\n")
+
+
+for command in subcommands:
+    print(f"Running for {command}")
+    result = subprocess.run(["freqtrade", command, "--help"], capture_output=True, text=True)
+
+    with Path(f"docs/commands/{command}.md").open("w") as f:
+        f.write(f"```\n{result.stdout}\n```\n")

build_helpers/install_windows.ps1

@@ -1,11 +1,10 @@
 # vendored Wheels compiled via https://github.com/xmatthias/ta-lib-python/tree/ta_bundled_040
 
-python -m pip install --upgrade pip wheel
+python -m pip install --upgrade pip
+python -c "import sys; print(f'{sys.version_info.major}.{sys.version_info.minor}')"
 
-$pyv = python -c "import sys; print(f'{sys.version_info.major}.{sys.version_info.minor}')"
-
-
-pip install --find-links=build_helpers\ --prefer-binary  TA-Lib
+pip install -U wheel "numpy<2"
+pip install --only-binary ta-lib --find-links=build_helpers\ ta-lib
 
 pip install -r requirements-dev.txt
 pip install -e .

build_helpers/schema.json

@@ -13,6 +13,10 @@
       "description": "The timeframe to use (e.g `1m`, `5m`, `15m`, `30m`, `1h` ...). \nUsually specified in the strategy and missing in the configuration.",
       "type": "string"
     },
+    "proxy_coin": {
+      "description": "Proxy coin - must be used for specific futures modes (e.g. BNFCR)",
+      "type": "string"
+    },
     "stake_currency": {
       "description": "Currency used for staking.",
       "type": "string"
@@ -102,8 +106,17 @@
     },
     "dry_run_wallet": {
       "description": "Initial wallet balance for dry run mode.",
-      "type": "number",
-      "default": 1000
+      "type": [
+        "number",
+        "object"
+      ],
+      "default": 1000,
+      "patternProperties": {
+        "^[a-zA-Z0-9]+$": {
+          "type": "number"
+        }
+      },
+      "additionalProperties": false
     },
     "cancel_open_orders_on_exit": {
       "description": "Cancel open orders when exiting.",
@@ -592,7 +605,11 @@
           "type": "string"
         },
         "chat_id": {
-          "description": "Telegram chat ID",
+          "description": "Telegram chat or group ID",
+          "type": "string"
+        },
+        "topic_id": {
+          "description": "Telegram topic ID - only applicable for group chats",
           "type": "string"
         },
         "allow_custom_messages": {
@@ -962,7 +979,7 @@
             "type": "string"
           }
         },
-        "x": {
+        "verbosity": {
           "description": "Logging verbosity level.",
           "type": "string",
           "enum": [
@@ -1038,7 +1055,6 @@
       "enum": [
         "json",
         "jsongz",
-        "hdf5",
         "feather",
         "parquet"
       ],
@@ -1050,7 +1066,6 @@
       "enum": [
         "json",
         "jsongz",
-        "hdf5",
         "feather",
         "parquet"
       ],

docker/Dockerfile.armhf

@@ -11,7 +11,7 @@ ENV FT_APP_ENV="docker"
 # Prepare environment
 RUN mkdir /freqtrade \
   && apt-get update \
-  && apt-get -y install sudo libatlas3-base libopenblas-dev curl sqlite3 libhdf5-dev libutf8proc-dev libsnappy-dev \
+  && apt-get -y install sudo libatlas3-base libopenblas-dev curl sqlite3 libutf8proc-dev libsnappy-dev \
   && apt-get clean \
   && useradd -u 1000 -G sudo -U -m ftuser \
   && chown ftuser:ftuser /freqtrade \

docs/advanced-hyperopt.md

@@ -39,6 +39,7 @@ class SuperDuperHyperOptLoss(IHyperOptLoss):
         config: Config,
         processed: dict[str, DataFrame],
         backtest_stats: dict[str, Any],
+        starting_balance: float,
         **kwargs,
     ) -> float:
         """
@@ -70,6 +71,7 @@ Currently, the arguments are:
 * `config`: Config object used (Note: Not all strategy-related parameters will be updated here if they are part of a hyperopt space).
 * `processed`: Dict of Dataframes with the pair as keys containing the data used for backtesting.
 * `backtest_stats`: Backtesting statistics using the same format as the backtesting file "strategy" substructure. Available fields can be seen in `generate_strategy_stats()` in `optimize_reports.py`.
+* `starting_balance`: Starting balance used for backtesting.
 
 This function needs to return a floating point number (`float`). Smaller numbers will be interpreted as better results. The parameters and balancing for this is up to you.
 

docs/advanced-orderflow.md

@@ -4,6 +4,7 @@ This guide walks you through utilizing public trade data for advanced orderflow
 
 !!! Warning "Experimental Feature"
     The orderflow feature is currently in beta and may be subject to changes in future releases. Please report any issues or feedback on the [Freqtrade GitHub repository](https://github.com/freqtrade/freqtrade/issues).
+    It's also currently not been tested with freqAI - and combining these two features is considered out of scope at this point.
 
 !!! Warning "Performance"
     Orderflow requires raw trades data. This data is rather large, and can cause a slow initial startup, when freqtrade needs to download the trades data for the last X candles. Additionally, enabling this feature will cause increased memory usage. Please ensure to have sufficient resources available.
@@ -69,8 +70,8 @@ dataframe["delta"] # Difference between ask and bid volume.
 dataframe["min_delta"] # Minimum delta within the candle
 dataframe["max_delta"] # Maximum delta within the candle
 dataframe["total_trades"] # Total number of trades
-dataframe["stacked_imbalances_bid"] # Price level of stacked bid imbalance 
-dataframe["stacked_imbalances_ask"] # Price level of stacked ask imbalance  
+dataframe["stacked_imbalances_bid"] # List of price levels of stacked bid imbalance range beginnings
+dataframe["stacked_imbalances_ask"] # List of price levels of stacked ask imbalance range beginnings
 ```
 
 You can access these columns in your strategy code for further analysis. Here's an example:

docs/backtesting.md

@@ -7,111 +7,7 @@ To learn how to get data for the pairs and exchange you're interested in, head o
 
 ## Backtesting command reference
 
-```
-usage: freqtrade backtesting [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                             [-d PATH] [--userdir PATH] [-s NAME]
-                             [--strategy-path PATH]
-                             [--recursive-strategy-search]
-                             [--freqaimodel NAME] [--freqaimodel-path PATH]
-                             [-i TIMEFRAME] [--timerange TIMERANGE]
-                             [--data-format-ohlcv {json,jsongz,hdf5,feather,parquet}]
-                             [--max-open-trades INT]
-                             [--stake-amount STAKE_AMOUNT] [--fee FLOAT]
-                             [-p PAIRS [PAIRS ...]] [--eps]
-                             [--enable-protections]
-                             [--dry-run-wallet DRY_RUN_WALLET]
-                             [--timeframe-detail TIMEFRAME_DETAIL]
-                             [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]
-                             [--export {none,trades,signals}]
-                             [--export-filename PATH]
-                             [--breakdown {day,week,month} [{day,week,month} ...]]
-                             [--cache {none,day,week,month}]
-                             [--freqai-backtest-live-models]
-
-options:
-  -h, --help            show this help message and exit
-  -i TIMEFRAME, --timeframe TIMEFRAME
-                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
-  --timerange TIMERANGE
-                        Specify what timerange of data to use.
-  --data-format-ohlcv {json,jsongz,hdf5,feather,parquet}
-                        Storage format for downloaded candle (OHLCV) data.
-                        (default: `feather`).
-  --max-open-trades INT
-                        Override the value of the `max_open_trades`
-                        configuration setting.
-  --stake-amount STAKE_AMOUNT
-                        Override the value of the `stake_amount` configuration
-                        setting.
-  --fee FLOAT           Specify fee ratio. Will be applied twice (on trade
-                        entry and exit).
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  --eps, --enable-position-stacking
-                        Allow buying the same pair multiple times (position
-                        stacking).
-  --enable-protections, --enableprotections
-                        Enable protections for backtesting.Will slow
-                        backtesting down by a considerable amount, but will
-                        include configured protections
-  --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET
-                        Starting balance, used for backtesting / hyperopt and
-                        dry-runs.
-  --timeframe-detail TIMEFRAME_DETAIL
-                        Specify detail timeframe for backtesting (`1m`, `5m`,
-                        `30m`, `1h`, `1d`).
-  --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]
-                        Provide a space-separated list of strategies to
-                        backtest. Please note that timeframe needs to be set
-                        either in config or via command line. When using this
-                        together with `--export trades`, the strategy-name is
-                        injected into the filename (so `backtest-data.json`
-                        becomes `backtest-data-SampleStrategy.json`
-  --export {none,trades,signals}
-                        Export backtest results (default: trades).
-  --export-filename PATH, --backtest-filename PATH
-                        Use this filename for backtest results.Requires
-                        `--export` to be set as well. Example: `--export-filen
-                        ame=user_data/backtest_results/backtest_today.json`
-  --breakdown {day,week,month} [{day,week,month} ...]
-                        Show backtesting breakdown per [day, week, month].
-  --cache {none,day,week,month}
-                        Load a cached backtest result no older than specified
-                        age (default: day).
-  --freqai-backtest-live-models
-                        Run backtest with ready models.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-Strategy arguments:
-  -s NAME, --strategy NAME
-                        Specify strategy class name which will be used by the
-                        bot.
-  --strategy-path PATH  Specify additional strategy lookup path.
-  --recursive-strategy-search
-                        Recursively search for a strategy in the strategies
-                        folder.
-  --freqaimodel NAME    Specify a custom freqaimodels.
-  --freqaimodel-path PATH
-                        Specify additional lookup path for freqaimodels.
-
-```
+--8<-- "commands/backtesting.md"
 
 ## Test your strategy with Backtesting
 
@@ -612,7 +508,12 @@ To utilize this, you can append `--timeframe-detail 5m` to your regular backtest
 freqtrade backtesting --strategy AwesomeStrategy --timeframe 1h --timeframe-detail 5m
 ```
 
-This will load 1h data as well as 5m data for the timeframe. The strategy will be analyzed with the 1h timeframe, and Entry orders will only be placed at the main timeframe, however Order fills and exit signals will be evaluated at the 5m candle, simulating intra-candle movements.
+This will load 1h data (the main timeframe) as well as 5m data (detail timeframe) for the selected timerange.
+The strategy will be analyzed with the 1h timeframe.
+Candles where activity may take place (there's an active signal, the pair is in a trade) are  evaluated at the 5m timeframe.
+This will allow for a more accurate simulation of intra-candle movements - and can lead to different results, especially on higher timeframes.
+
+Entries will generally still happen at the main candle's open, however freed trade slots may be freed earlier (if the exit signal is triggered on the 5m candle), which can then be used for a new trade of a different pair.
 
 All callback functions (`custom_exit()`, `custom_stoploss()`, ... ) will be running for each 5m candle once the trade is opened (so 12 times in the above example of 1h timeframe, and 5m detailed timeframe).
 
@@ -624,6 +525,27 @@ Also, data must be available / downloaded already.
 !!! Tip
     You can use this function as the last part of strategy development, to ensure your strategy is not exploiting one of the [backtesting assumptions](#assumptions-made-by-backtesting). Strategies that perform similarly well with this mode have a good chance to perform well in dry/live modes too (although only forward-testing (dry-mode) can really confirm a strategy).
 
+??? Sample "Extreme Difference Example"
+    Using `--timeframe-detail` on an extreme example (all below pairs have the 10:00 candle with an entry signal) may lead to the following backtesting Trade sequence with 1 max_open_trades:
+
+    | Pair | Entry Time | Exit Time | Duration |
+    |------|------------|-----------| -------- |
+    | BTC/USDT | 2024-01-01 10:00:00 | 2021-01-01 10:05:00 | 5m |
+    | ETH/USDT | 2024-01-01 10:05:00 | 2021-01-01 10:15:00 | 10m |
+    | XRP/USDT | 2024-01-01 10:15:00 | 2021-01-01 10:30:00 | 15m |
+    | SOL/USDT | 2024-01-01 10:15:00 | 2021-01-01 11:05:00 | 50m |
+    | BTC/USDT | 2024-01-01 11:05:00 | 2021-01-01 12:00:00 | 55m |
+
+    Without timeframe-detail, this would look like:
+
+    | Pair | Entry Time | Exit Time | Duration |
+    |------|------------|-----------| -------- |
+    | BTC/USDT | 2024-01-01 10:00:00 | 2021-01-01 11:00:00 | 1h |
+    | BTC/USDT | 2024-01-01 11:00:00 | 2021-01-01 12:00:00 | 1h |
+
+    The difference is significant, as without detail data, only the first `max_open_trades` signals per candle are evaluated, and the trade slots are only freed at the end of the candle, allowing for a new trade to be opened at the next candle.
+
+
 ## Backtesting multiple strategies
 
 To compare multiple strategies, a list of Strategies can be provided to backtesting.

docs/bot-usage.md

@@ -10,101 +10,11 @@ This page explains the different parameters of the bot and how to run it.
 
 ## Bot commands
 
-```
-usage: freqtrade [-h] [-V]
-                 {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}
-                 ...
-
-Free, open source crypto trading bot
-
-positional arguments:
-  {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}
-    trade               Trade module.
-    create-userdir      Create user-data directory.
-    new-config          Create new config
-    show-config         Show resolved config
-    new-strategy        Create new strategy
-    download-data       Download backtesting data.
-    convert-data        Convert candle (OHLCV) data from one format to
-                        another.
-    convert-trade-data  Convert trade data from one format to another.
-    trades-to-ohlcv     Convert trade data to OHLCV data.
-    list-data           List downloaded data.
-    backtesting         Backtesting module.
-    backtesting-show    Show past Backtest results
-    backtesting-analysis
-                        Backtest Analysis module.
-    edge                Edge module.
-    hyperopt            Hyperopt module.
-    hyperopt-list       List Hyperopt results
-    hyperopt-show       Show details of Hyperopt results
-    list-exchanges      Print available exchanges.
-    list-markets        Print markets on exchange.
-    list-pairs          Print pairs on exchange.
-    list-strategies     Print available strategies.
-    list-freqaimodels   Print available freqAI models.
-    list-timeframes     Print available timeframes for the exchange.
-    show-trades         Show trades.
-    test-pairlist       Test your pairlist configuration.
-    convert-db          Migrate database to different system
-    install-ui          Install FreqUI
-    plot-dataframe      Plot candles with indicators.
-    plot-profit         Generate plot showing profits.
-    webserver           Webserver module.
-    strategy-updater    updates outdated strategy files to the current version
-    lookahead-analysis  Check for potential look ahead bias.
-    recursive-analysis  Check for potential recursive formula issue.
-
-options:
-  -h, --help            show this help message and exit
-  -V, --version         show program's version number and exit
-
-```
+--8<-- "commands/main.md"
 
 ### Bot trading commands
 
-```
-usage: freqtrade trade [-h] [-v] [--logfile FILE] [-V] [-c PATH] [-d PATH]
-                       [--userdir PATH] [-s NAME] [--strategy-path PATH]
-                       [--db-url PATH] [--sd-notify] [--dry-run]
-                       [--dry-run-wallet DRY_RUN_WALLET]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --db-url PATH         Override trades database URL, this is useful in custom
-                        deployments (default: `sqlite:///tradesv3.sqlite` for
-                        Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
-                        Dry Run).
-  --sd-notify           Notify systemd service manager.
-  --dry-run             Enforce dry-run for trading (removes Exchange secrets
-                        and simulates trades).
-  --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET
-                        Starting balance, used for backtesting / hyperopt and
-                        dry-runs.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-Strategy arguments:
-  -s NAME, --strategy NAME
-                        Specify strategy class name which will be used by the
-                        bot.
-  --strategy-path PATH  Specify additional strategy lookup path.
-
-```
+--8<-- "commands/trade.md"
 
 ### How to specify which configuration file be used?
 

docs/commands/backtesting-analysis.md

@@ -0,0 +1,66 @@
+```
+usage: freqtrade backtesting-analysis [-h] [-v] [--no-color] [--logfile FILE]
+                                      [-V] [-c PATH] [-d PATH]
+                                      [--userdir PATH]
+                                      [--export-filename PATH]
+                                      [--analysis-groups {0,1,2,3,4,5} [{0,1,2,3,4,5} ...]]
+                                      [--enter-reason-list ENTER_REASON_LIST [ENTER_REASON_LIST ...]]
+                                      [--exit-reason-list EXIT_REASON_LIST [EXIT_REASON_LIST ...]]
+                                      [--indicator-list INDICATOR_LIST [INDICATOR_LIST ...]]
+                                      [--entry-only] [--exit-only]
+                                      [--timerange TIMERANGE]
+                                      [--rejected-signals] [--analysis-to-csv]
+                                      [--analysis-csv-path ANALYSIS_CSV_PATH]
+
+options:
+  -h, --help            show this help message and exit
+  --export-filename PATH, --backtest-filename PATH
+                        Use this filename for backtest results.Requires
+                        `--export` to be set as well. Example: `--export-filen
+                        ame=user_data/backtest_results/backtest_today.json`
+  --analysis-groups {0,1,2,3,4,5} [{0,1,2,3,4,5} ...]
+                        grouping output - 0: simple wins/losses by enter tag,
+                        1: by enter_tag, 2: by enter_tag and exit_tag, 3: by
+                        pair and enter_tag, 4: by pair, enter_ and exit_tag
+                        (this can get quite large), 5: by exit_tag
+  --enter-reason-list ENTER_REASON_LIST [ENTER_REASON_LIST ...]
+                        Space separated list of entry signals to analyse.
+                        Default: all. e.g. 'entry_tag_a entry_tag_b'
+  --exit-reason-list EXIT_REASON_LIST [EXIT_REASON_LIST ...]
+                        Space separated list of exit signals to analyse.
+                        Default: all. e.g. 'exit_tag_a roi stop_loss
+                        trailing_stop_loss'
+  --indicator-list INDICATOR_LIST [INDICATOR_LIST ...]
+                        Space separated list of indicators to analyse. e.g.
+                        'close rsi bb_lowerband profit_abs'
+  --entry-only          Only analyze entry signals.
+  --exit-only           Only analyze exit signals.
+  --timerange TIMERANGE
+                        Specify what timerange of data to use.
+  --rejected-signals    Analyse rejected signals
+  --analysis-to-csv     Save selected analysis tables to individual CSVs
+  --analysis-csv-path ANALYSIS_CSV_PATH
+                        Specify a path to save the analysis CSVs if
+                        --analysis-to-csv is enabled. Default:
+                        user_data/basktesting_results/
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/backtesting-show.md

@@ -0,0 +1,36 @@
+```
+usage: freqtrade backtesting-show [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                                  [-c PATH] [-d PATH] [--userdir PATH]
+                                  [--export-filename PATH] [--show-pair-list]
+                                  [--breakdown {day,week,month} [{day,week,month} ...]]
+
+options:
+  -h, --help            show this help message and exit
+  --export-filename PATH, --backtest-filename PATH
+                        Use this filename for backtest results.Requires
+                        `--export` to be set as well. Example: `--export-filen
+                        ame=user_data/backtest_results/backtest_today.json`
+  --show-pair-list      Show backtesting pairlist sorted by profit.
+  --breakdown {day,week,month} [{day,week,month} ...]
+                        Show backtesting breakdown per [day, week, month].
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/backtesting.md

@@ -0,0 +1,107 @@
+```
+usage: freqtrade backtesting [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                             [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]
+                             [--strategy-path PATH]
+                             [--recursive-strategy-search]
+                             [--freqaimodel NAME] [--freqaimodel-path PATH]
+                             [-i TIMEFRAME] [--timerange TIMERANGE]
+                             [--data-format-ohlcv {json,jsongz,feather,parquet}]
+                             [--max-open-trades INT]
+                             [--stake-amount STAKE_AMOUNT] [--fee FLOAT]
+                             [-p PAIRS [PAIRS ...]] [--eps]
+                             [--enable-protections]
+                             [--dry-run-wallet DRY_RUN_WALLET]
+                             [--timeframe-detail TIMEFRAME_DETAIL]
+                             [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]
+                             [--export {none,trades,signals}]
+                             [--export-filename PATH]
+                             [--breakdown {day,week,month} [{day,week,month} ...]]
+                             [--cache {none,day,week,month}]
+                             [--freqai-backtest-live-models]
+
+options:
+  -h, --help            show this help message and exit
+  -i TIMEFRAME, --timeframe TIMEFRAME
+                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
+  --timerange TIMERANGE
+                        Specify what timerange of data to use.
+  --data-format-ohlcv {json,jsongz,feather,parquet}
+                        Storage format for downloaded candle (OHLCV) data.
+                        (default: `feather`).
+  --max-open-trades INT
+                        Override the value of the `max_open_trades`
+                        configuration setting.
+  --stake-amount STAKE_AMOUNT
+                        Override the value of the `stake_amount` configuration
+                        setting.
+  --fee FLOAT           Specify fee ratio. Will be applied twice (on trade
+                        entry and exit).
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --eps, --enable-position-stacking
+                        Allow buying the same pair multiple times (position
+                        stacking).
+  --enable-protections, --enableprotections
+                        Enable protections for backtesting.Will slow
+                        backtesting down by a considerable amount, but will
+                        include configured protections
+  --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET
+                        Starting balance, used for backtesting / hyperopt and
+                        dry-runs.
+  --timeframe-detail TIMEFRAME_DETAIL
+                        Specify detail timeframe for backtesting (`1m`, `5m`,
+                        `30m`, `1h`, `1d`).
+  --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]
+                        Provide a space-separated list of strategies to
+                        backtest. Please note that timeframe needs to be set
+                        either in config or via command line. When using this
+                        together with `--export trades`, the strategy-name is
+                        injected into the filename (so `backtest-data.json`
+                        becomes `backtest-data-SampleStrategy.json`
+  --export {none,trades,signals}
+                        Export backtest results (default: trades).
+  --export-filename PATH, --backtest-filename PATH
+                        Use this filename for backtest results.Requires
+                        `--export` to be set as well. Example: `--export-filen
+                        ame=user_data/backtest_results/backtest_today.json`
+  --breakdown {day,week,month} [{day,week,month} ...]
+                        Show backtesting breakdown per [day, week, month].
+  --cache {none,day,week,month}
+                        Load a cached backtest result no older than specified
+                        age (default: day).
+  --freqai-backtest-live-models
+                        Run backtest with ready models.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+Strategy arguments:
+  -s NAME, --strategy NAME
+                        Specify strategy class name which will be used by the
+                        bot.
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+  --freqaimodel NAME    Specify a custom freqaimodels.
+  --freqaimodel-path PATH
+                        Specify additional lookup path for freqaimodels.
+
+```

docs/commands/convert-data.md

@@ -0,0 +1,52 @@
+```
+usage: freqtrade convert-data [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                              [-c PATH] [-d PATH] [--userdir PATH]
+                              [-p PAIRS [PAIRS ...]] --format-from
+                              {json,jsongz,feather,parquet} --format-to
+                              {json,jsongz,feather,parquet} [--erase]
+                              [--exchange EXCHANGE]
+                              [-t TIMEFRAMES [TIMEFRAMES ...]]
+                              [--trading-mode {spot,margin,futures}]
+                              [--candle-types {spot,futures,mark,index,premiumIndex,funding_rate} [{spot,futures,mark,index,premiumIndex,funding_rate} ...]]
+
+options:
+  -h, --help            show this help message and exit
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --format-from {json,jsongz,feather,parquet}
+                        Source format for data conversion.
+  --format-to {json,jsongz,feather,parquet}
+                        Destination format for data conversion.
+  --erase               Clean all existing data for the selected
+                        exchange/pairs/timeframes.
+  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
+  -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]
+                        Specify which tickers to download. Space-separated
+                        list. Default: `1m 5m`.
+  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
+                        Select Trading mode
+  --candle-types {spot,futures,mark,index,premiumIndex,funding_rate} [{spot,futures,mark,index,premiumIndex,funding_rate} ...]
+                        Select candle type to convert. Defaults to all
+                        available types.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/convert-db.md

@@ -0,0 +1,12 @@
+```
+usage: freqtrade convert-db [-h] [--db-url PATH] [--db-url-from PATH]
+
+options:
+  -h, --help          show this help message and exit
+  --db-url PATH       Override trades database URL, this is useful in custom
+                      deployments (default: `sqlite:///tradesv3.sqlite` for
+                      Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
+                      Dry Run).
+  --db-url-from PATH  Source db url to use when migrating a database.
+
+```

docs/commands/convert-trade-data.md

@@ -0,0 +1,41 @@
+```
+usage: freqtrade convert-trade-data [-h] [-v] [--no-color] [--logfile FILE]
+                                    [-V] [-c PATH] [-d PATH] [--userdir PATH]
+                                    [-p PAIRS [PAIRS ...]] --format-from
+                                    {json,jsongz,feather,parquet,kraken_csv}
+                                    --format-to {json,jsongz,feather,parquet}
+                                    [--erase] [--exchange EXCHANGE]
+
+options:
+  -h, --help            show this help message and exit
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --format-from {json,jsongz,feather,parquet,kraken_csv}
+                        Source format for data conversion.
+  --format-to {json,jsongz,feather,parquet}
+                        Destination format for data conversion.
+  --erase               Clean all existing data for the selected
+                        exchange/pairs/timeframes.
+  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/create-userdir.md

@@ -0,0 +1,10 @@
+```
+usage: freqtrade create-userdir [-h] [--userdir PATH] [--reset]
+
+options:
+  -h, --help            show this help message and exit
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+  --reset               Reset sample files to their original state.
+
+```

docs/commands/download-data.md

@@ -0,0 +1,70 @@
+```
+usage: freqtrade download-data [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                               [-c PATH] [-d PATH] [--userdir PATH]
+                               [-p PAIRS [PAIRS ...]] [--pairs-file FILE]
+                               [--days INT] [--new-pairs-days INT]
+                               [--include-inactive-pairs]
+                               [--timerange TIMERANGE] [--dl-trades]
+                               [--convert] [--exchange EXCHANGE]
+                               [-t TIMEFRAMES [TIMEFRAMES ...]] [--erase]
+                               [--data-format-ohlcv {json,jsongz,feather,parquet}]
+                               [--data-format-trades {json,jsongz,feather,parquet}]
+                               [--trading-mode {spot,margin,futures}]
+                               [--prepend]
+
+options:
+  -h, --help            show this help message and exit
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --pairs-file FILE     File containing a list of pairs. Takes precedence over
+                        --pairs or pairs configured in the configuration.
+  --days INT            Download data for given number of days.
+  --new-pairs-days INT  Download data of new pairs for given number of days.
+                        Default: `None`.
+  --include-inactive-pairs
+                        Also download data from inactive pairs.
+  --timerange TIMERANGE
+                        Specify what timerange of data to use.
+  --dl-trades           Download trades instead of OHLCV data.
+  --convert             Convert downloaded trades to OHLCV data. Only
+                        applicable in combination with `--dl-trades`. Will be
+                        automatic for exchanges which don't have historic
+                        OHLCV (e.g. Kraken). If not provided, use `trades-to-
+                        ohlcv` to convert trades data to OHLCV data.
+  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
+  -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]
+                        Specify which tickers to download. Space-separated
+                        list. Default: `1m 5m`.
+  --erase               Clean all existing data for the selected
+                        exchange/pairs/timeframes.
+  --data-format-ohlcv {json,jsongz,feather,parquet}
+                        Storage format for downloaded candle (OHLCV) data.
+                        (default: `feather`).
+  --data-format-trades {json,jsongz,feather,parquet}
+                        Storage format for downloaded trades data. (default:
+                        `feather`).
+  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
+                        Select Trading mode
+  --prepend             Allow data prepending. (Data-appending is disabled)
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/edge.md

@@ -0,0 +1,69 @@
+```
+usage: freqtrade edge [-h] [-v] [--no-color] [--logfile FILE] [-V] [-c PATH]
+                      [-d PATH] [--userdir PATH] [-s NAME]
+                      [--strategy-path PATH] [--recursive-strategy-search]
+                      [--freqaimodel NAME] [--freqaimodel-path PATH]
+                      [-i TIMEFRAME] [--timerange TIMERANGE]
+                      [--data-format-ohlcv {json,jsongz,feather,parquet}]
+                      [--max-open-trades INT] [--stake-amount STAKE_AMOUNT]
+                      [--fee FLOAT] [-p PAIRS [PAIRS ...]]
+                      [--stoplosses STOPLOSS_RANGE]
+
+options:
+  -h, --help            show this help message and exit
+  -i TIMEFRAME, --timeframe TIMEFRAME
+                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
+  --timerange TIMERANGE
+                        Specify what timerange of data to use.
+  --data-format-ohlcv {json,jsongz,feather,parquet}
+                        Storage format for downloaded candle (OHLCV) data.
+                        (default: `feather`).
+  --max-open-trades INT
+                        Override the value of the `max_open_trades`
+                        configuration setting.
+  --stake-amount STAKE_AMOUNT
+                        Override the value of the `stake_amount` configuration
+                        setting.
+  --fee FLOAT           Specify fee ratio. Will be applied twice (on trade
+                        entry and exit).
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --stoplosses STOPLOSS_RANGE
+                        Defines a range of stoploss values against which edge
+                        will assess the strategy. The format is "min,max,step"
+                        (without any space). Example:
+                        `--stoplosses=-0.01,-0.1,-0.001`
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+Strategy arguments:
+  -s NAME, --strategy NAME
+                        Specify strategy class name which will be used by the
+                        bot.
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+  --freqaimodel NAME    Specify a custom freqaimodels.
+  --freqaimodel-path PATH
+                        Specify additional lookup path for freqaimodels.
+
+```

docs/commands/hyperopt-list.md

@@ -0,0 +1,62 @@
+```
+usage: freqtrade hyperopt-list [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                               [-c PATH] [-d PATH] [--userdir PATH] [--best]
+                               [--profitable] [--min-trades INT]
+                               [--max-trades INT] [--min-avg-time FLOAT]
+                               [--max-avg-time FLOAT] [--min-avg-profit FLOAT]
+                               [--max-avg-profit FLOAT]
+                               [--min-total-profit FLOAT]
+                               [--max-total-profit FLOAT]
+                               [--min-objective FLOAT] [--max-objective FLOAT]
+                               [--print-json] [--no-details]
+                               [--hyperopt-filename FILENAME]
+                               [--export-csv FILE]
+
+options:
+  -h, --help            show this help message and exit
+  --best                Select only best epochs.
+  --profitable          Select only profitable epochs.
+  --min-trades INT      Select epochs with more than INT trades.
+  --max-trades INT      Select epochs with less than INT trades.
+  --min-avg-time FLOAT  Select epochs above average time.
+  --max-avg-time FLOAT  Select epochs below average time.
+  --min-avg-profit FLOAT
+                        Select epochs above average profit.
+  --max-avg-profit FLOAT
+                        Select epochs below average profit.
+  --min-total-profit FLOAT
+                        Select epochs above total profit.
+  --max-total-profit FLOAT
+                        Select epochs below total profit.
+  --min-objective FLOAT
+                        Select epochs above objective.
+  --max-objective FLOAT
+                        Select epochs below objective.
+  --print-json          Print output in JSON format.
+  --no-details          Do not print best epoch details.
+  --hyperopt-filename FILENAME
+                        Hyperopt result filename.Example: `--hyperopt-
+                        filename=hyperopt_results_2020-09-27_16-20-48.pickle`
+  --export-csv FILE     Export to CSV-File. This will disable table print.
+                        Example: --export-csv hyperopt.csv
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/hyperopt-show.md

@@ -0,0 +1,43 @@
+```
+usage: freqtrade hyperopt-show [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                               [-c PATH] [-d PATH] [--userdir PATH] [--best]
+                               [--profitable] [-n INT] [--print-json]
+                               [--hyperopt-filename FILENAME] [--no-header]
+                               [--disable-param-export]
+                               [--breakdown {day,week,month} [{day,week,month} ...]]
+
+options:
+  -h, --help            show this help message and exit
+  --best                Select only best epochs.
+  --profitable          Select only profitable epochs.
+  -n INT, --index INT   Specify the index of the epoch to print details for.
+  --print-json          Print output in JSON format.
+  --hyperopt-filename FILENAME
+                        Hyperopt result filename.Example: `--hyperopt-
+                        filename=hyperopt_results_2020-09-27_16-20-48.pickle`
+  --no-header           Do not print epoch details header.
+  --disable-param-export
+                        Disable automatic hyperopt parameter export.
+  --breakdown {day,week,month} [{day,week,month} ...]
+                        Show backtesting breakdown per [day, week, month].
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/hyperopt.md

@@ -0,0 +1,121 @@
+```
+usage: freqtrade hyperopt [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                          [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]
+                          [--strategy-path PATH] [--recursive-strategy-search]
+                          [--freqaimodel NAME] [--freqaimodel-path PATH]
+                          [-i TIMEFRAME] [--timerange TIMERANGE]
+                          [--data-format-ohlcv {json,jsongz,feather,parquet}]
+                          [--max-open-trades INT]
+                          [--stake-amount STAKE_AMOUNT] [--fee FLOAT]
+                          [-p PAIRS [PAIRS ...]] [--hyperopt-path PATH]
+                          [--eps] [--enable-protections]
+                          [--dry-run-wallet DRY_RUN_WALLET]
+                          [--timeframe-detail TIMEFRAME_DETAIL] [-e INT]
+                          [--spaces {all,buy,sell,roi,stoploss,trailing,protection,trades,default} [{all,buy,sell,roi,stoploss,trailing,protection,trades,default} ...]]
+                          [--print-all] [--print-json] [-j JOBS]
+                          [--random-state INT] [--min-trades INT]
+                          [--hyperopt-loss NAME] [--disable-param-export]
+                          [--ignore-missing-spaces] [--analyze-per-epoch]
+
+options:
+  -h, --help            show this help message and exit
+  -i TIMEFRAME, --timeframe TIMEFRAME
+                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
+  --timerange TIMERANGE
+                        Specify what timerange of data to use.
+  --data-format-ohlcv {json,jsongz,feather,parquet}
+                        Storage format for downloaded candle (OHLCV) data.
+                        (default: `feather`).
+  --max-open-trades INT
+                        Override the value of the `max_open_trades`
+                        configuration setting.
+  --stake-amount STAKE_AMOUNT
+                        Override the value of the `stake_amount` configuration
+                        setting.
+  --fee FLOAT           Specify fee ratio. Will be applied twice (on trade
+                        entry and exit).
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --hyperopt-path PATH  Specify additional lookup path for Hyperopt Loss
+                        functions.
+  --eps, --enable-position-stacking
+                        Allow buying the same pair multiple times (position
+                        stacking).
+  --enable-protections, --enableprotections
+                        Enable protections for backtesting.Will slow
+                        backtesting down by a considerable amount, but will
+                        include configured protections
+  --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET
+                        Starting balance, used for backtesting / hyperopt and
+                        dry-runs.
+  --timeframe-detail TIMEFRAME_DETAIL
+                        Specify detail timeframe for backtesting (`1m`, `5m`,
+                        `30m`, `1h`, `1d`).
+  -e INT, --epochs INT  Specify number of epochs (default: 100).
+  --spaces {all,buy,sell,roi,stoploss,trailing,protection,trades,default} [{all,buy,sell,roi,stoploss,trailing,protection,trades,default} ...]
+                        Specify which parameters to hyperopt. Space-separated
+                        list.
+  --print-all           Print all results, not only the best ones.
+  --print-json          Print output in JSON format.
+  -j JOBS, --job-workers JOBS
+                        The number of concurrently running jobs for
+                        hyperoptimization (hyperopt worker processes). If -1
+                        (default), all CPUs are used, for -2, all CPUs but one
+                        are used, etc. If 1 is given, no parallel computing
+                        code is used at all.
+  --random-state INT    Set random state to some positive integer for
+                        reproducible hyperopt results.
+  --min-trades INT      Set minimal desired number of trades for evaluations
+                        in the hyperopt optimization path (default: 1).
+  --hyperopt-loss NAME, --hyperoptloss NAME
+                        Specify the class name of the hyperopt loss function
+                        class (IHyperOptLoss). Different functions can
+                        generate completely different results, since the
+                        target for optimization is different. Built-in
+                        Hyperopt-loss-functions are:
+                        ShortTradeDurHyperOptLoss, OnlyProfitHyperOptLoss,
+                        SharpeHyperOptLoss, SharpeHyperOptLossDaily,
+                        SortinoHyperOptLoss, SortinoHyperOptLossDaily,
+                        CalmarHyperOptLoss, MaxDrawDownHyperOptLoss,
+                        MaxDrawDownRelativeHyperOptLoss,
+                        ProfitDrawDownHyperOptLoss, MultiMetricHyperOptLoss
+  --disable-param-export
+                        Disable automatic hyperopt parameter export.
+  --ignore-missing-spaces, --ignore-unparameterized-spaces
+                        Suppress errors for any requested Hyperopt spaces that
+                        do not contain any parameters.
+  --analyze-per-epoch   Run populate_indicators once per epoch.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+Strategy arguments:
+  -s NAME, --strategy NAME
+                        Specify strategy class name which will be used by the
+                        bot.
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+  --freqaimodel NAME    Specify a custom freqaimodels.
+  --freqaimodel-path PATH
+                        Specify additional lookup path for freqaimodels.
+
+```

docs/commands/install-ui.md

@@ -0,0 +1,11 @@
+```
+usage: freqtrade install-ui [-h] [--erase] [--ui-version UI_VERSION]
+
+options:
+  -h, --help            show this help message and exit
+  --erase               Clean UI folder, don't download new version.
+  --ui-version UI_VERSION
+                        Specify a specific version of FreqUI to install. Not
+                        specifying this installs the latest version.
+
+```

docs/commands/list-data.md

@@ -0,0 +1,48 @@
+```
+usage: freqtrade list-data [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                           [-c PATH] [-d PATH] [--userdir PATH]
+                           [--exchange EXCHANGE]
+                           [--data-format-ohlcv {json,jsongz,feather,parquet}]
+                           [--data-format-trades {json,jsongz,feather,parquet}]
+                           [--trades] [-p PAIRS [PAIRS ...]]
+                           [--trading-mode {spot,margin,futures}]
+                           [--show-timerange]
+
+options:
+  -h, --help            show this help message and exit
+  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
+  --data-format-ohlcv {json,jsongz,feather,parquet}
+                        Storage format for downloaded candle (OHLCV) data.
+                        (default: `feather`).
+  --data-format-trades {json,jsongz,feather,parquet}
+                        Storage format for downloaded trades data. (default:
+                        `feather`).
+  --trades              Work on trades data instead of OHLCV data.
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
+                        Select Trading mode
+  --show-timerange      Show timerange available for available data. (May take
+                        a while to calculate).
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/list-exchanges.md

@@ -0,0 +1,29 @@
+```
+usage: freqtrade list-exchanges [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                                [-c PATH] [-d PATH] [--userdir PATH] [-1] [-a]
+
+options:
+  -h, --help            show this help message and exit
+  -1, --one-column      Print output in one column.
+  -a, --all             Print all exchanges known to the ccxt library.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/list-freqaimodels.md

@@ -0,0 +1,31 @@
+```
+usage: freqtrade list-freqaimodels [-h] [-v] [--no-color] [--logfile FILE]
+                                   [-V] [-c PATH] [-d PATH] [--userdir PATH]
+                                   [--freqaimodel-path PATH] [-1]
+
+options:
+  -h, --help            show this help message and exit
+  --freqaimodel-path PATH
+                        Specify additional lookup path for freqaimodels.
+  -1, --one-column      Print output in one column.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/list-hyperoptloss.md

@@ -0,0 +1,31 @@
+```
+usage: freqtrade list-hyperoptloss [-h] [-v] [--no-color] [--logfile FILE]
+                                   [-V] [-c PATH] [-d PATH] [--userdir PATH]
+                                   [--hyperopt-path PATH] [-1]
+
+options:
+  -h, --help            show this help message and exit
+  --hyperopt-path PATH  Specify additional lookup path for Hyperopt Loss
+                        functions.
+  -1, --one-column      Print output in one column.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/list-markets.md

@@ -0,0 +1,46 @@
+```
+usage: freqtrade list-markets [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                              [-c PATH] [-d PATH] [--userdir PATH]
+                              [--exchange EXCHANGE] [--print-list]
+                              [--print-json] [-1] [--print-csv]
+                              [--base BASE_CURRENCY [BASE_CURRENCY ...]]
+                              [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]]
+                              [-a] [--trading-mode {spot,margin,futures}]
+
+options:
+  -h, --help            show this help message and exit
+  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
+  --print-list          Print list of pairs or market symbols. By default data
+                        is printed in the tabular format.
+  --print-json          Print list of pairs or market symbols in JSON format.
+  -1, --one-column      Print output in one column.
+  --print-csv           Print exchange pair or market data in the csv format.
+  --base BASE_CURRENCY [BASE_CURRENCY ...]
+                        Specify base currency(-ies). Space-separated list.
+  --quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]
+                        Specify quote currency(-ies). Space-separated list.
+  -a, --all             Print all pairs or market symbols. By default only
+                        active ones are shown.
+  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
+                        Select Trading mode
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/list-pairs.md

@@ -0,0 +1,46 @@
+```
+usage: freqtrade list-pairs [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                            [-c PATH] [-d PATH] [--userdir PATH]
+                            [--exchange EXCHANGE] [--print-list]
+                            [--print-json] [-1] [--print-csv]
+                            [--base BASE_CURRENCY [BASE_CURRENCY ...]]
+                            [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]] [-a]
+                            [--trading-mode {spot,margin,futures}]
+
+options:
+  -h, --help            show this help message and exit
+  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
+  --print-list          Print list of pairs or market symbols. By default data
+                        is printed in the tabular format.
+  --print-json          Print list of pairs or market symbols in JSON format.
+  -1, --one-column      Print output in one column.
+  --print-csv           Print exchange pair or market data in the csv format.
+  --base BASE_CURRENCY [BASE_CURRENCY ...]
+                        Specify base currency(-ies). Space-separated list.
+  --quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]
+                        Specify quote currency(-ies). Space-separated list.
+  -a, --all             Print all pairs or market symbols. By default only
+                        active ones are shown.
+  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
+                        Select Trading mode
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/list-strategies.md

@@ -0,0 +1,34 @@
+```
+usage: freqtrade list-strategies [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                                 [-c PATH] [-d PATH] [--userdir PATH]
+                                 [--strategy-path PATH] [-1]
+                                 [--recursive-strategy-search]
+
+options:
+  -h, --help            show this help message and exit
+  --strategy-path PATH  Specify additional strategy lookup path.
+  -1, --one-column      Print output in one column.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/list-timeframes.md

@@ -0,0 +1,30 @@
+```
+usage: freqtrade list-timeframes [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                                 [-c PATH] [-d PATH] [--userdir PATH]
+                                 [--exchange EXCHANGE] [-1]
+
+options:
+  -h, --help            show this help message and exit
+  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
+  -1, --one-column      Print output in one column.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/lookahead-analysis.md

@@ -0,0 +1,108 @@
+```
+usage: freqtrade lookahead-analysis [-h] [-v] [--no-color] [--logfile FILE]
+                                    [-V] [-c PATH] [-d PATH] [--userdir PATH]
+                                    [-s NAME] [--strategy-path PATH]
+                                    [--recursive-strategy-search]
+                                    [--freqaimodel NAME]
+                                    [--freqaimodel-path PATH] [-i TIMEFRAME]
+                                    [--timerange TIMERANGE]
+                                    [--data-format-ohlcv {json,jsongz,feather,parquet}]
+                                    [--max-open-trades INT]
+                                    [--stake-amount STAKE_AMOUNT]
+                                    [--fee FLOAT] [-p PAIRS [PAIRS ...]]
+                                    [--enable-protections]
+                                    [--dry-run-wallet DRY_RUN_WALLET]
+                                    [--timeframe-detail TIMEFRAME_DETAIL]
+                                    [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]
+                                    [--export {none,trades,signals}]
+                                    [--export-filename PATH]
+                                    [--freqai-backtest-live-models]
+                                    [--minimum-trade-amount INT]
+                                    [--targeted-trade-amount INT]
+                                    [--lookahead-analysis-exportfilename LOOKAHEAD_ANALYSIS_EXPORTFILENAME]
+
+options:
+  -h, --help            show this help message and exit
+  -i TIMEFRAME, --timeframe TIMEFRAME
+                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
+  --timerange TIMERANGE
+                        Specify what timerange of data to use.
+  --data-format-ohlcv {json,jsongz,feather,parquet}
+                        Storage format for downloaded candle (OHLCV) data.
+                        (default: `feather`).
+  --max-open-trades INT
+                        Override the value of the `max_open_trades`
+                        configuration setting.
+  --stake-amount STAKE_AMOUNT
+                        Override the value of the `stake_amount` configuration
+                        setting.
+  --fee FLOAT           Specify fee ratio. Will be applied twice (on trade
+                        entry and exit).
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --enable-protections, --enableprotections
+                        Enable protections for backtesting.Will slow
+                        backtesting down by a considerable amount, but will
+                        include configured protections
+  --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET
+                        Starting balance, used for backtesting / hyperopt and
+                        dry-runs.
+  --timeframe-detail TIMEFRAME_DETAIL
+                        Specify detail timeframe for backtesting (`1m`, `5m`,
+                        `30m`, `1h`, `1d`).
+  --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]
+                        Provide a space-separated list of strategies to
+                        backtest. Please note that timeframe needs to be set
+                        either in config or via command line. When using this
+                        together with `--export trades`, the strategy-name is
+                        injected into the filename (so `backtest-data.json`
+                        becomes `backtest-data-SampleStrategy.json`
+  --export {none,trades,signals}
+                        Export backtest results (default: trades).
+  --export-filename PATH, --backtest-filename PATH
+                        Use this filename for backtest results.Requires
+                        `--export` to be set as well. Example: `--export-filen
+                        ame=user_data/backtest_results/backtest_today.json`
+  --freqai-backtest-live-models
+                        Run backtest with ready models.
+  --minimum-trade-amount INT
+                        Minimum trade amount for lookahead-analysis
+  --targeted-trade-amount INT
+                        Targeted trade amount for lookahead analysis
+  --lookahead-analysis-exportfilename LOOKAHEAD_ANALYSIS_EXPORTFILENAME
+                        Use this csv-filename to store lookahead-analysis-
+                        results
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+Strategy arguments:
+  -s NAME, --strategy NAME
+                        Specify strategy class name which will be used by the
+                        bot.
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+  --freqaimodel NAME    Specify a custom freqaimodels.
+  --freqaimodel-path PATH
+                        Specify additional lookup path for freqaimodels.
+
+```

docs/commands/main.md

@@ -0,0 +1,51 @@
+```
+usage: freqtrade [-h] [-V]
+                 {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-hyperoptloss,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}
+                 ...
+
+Free, open source crypto trading bot
+
+positional arguments:
+  {trade,create-userdir,new-config,show-config,new-strategy,download-data,convert-data,convert-trade-data,trades-to-ohlcv,list-data,backtesting,backtesting-show,backtesting-analysis,edge,hyperopt,hyperopt-list,hyperopt-show,list-exchanges,list-markets,list-pairs,list-strategies,list-hyperoptloss,list-freqaimodels,list-timeframes,show-trades,test-pairlist,convert-db,install-ui,plot-dataframe,plot-profit,webserver,strategy-updater,lookahead-analysis,recursive-analysis}
+    trade               Trade module.
+    create-userdir      Create user-data directory.
+    new-config          Create new config
+    show-config         Show resolved config
+    new-strategy        Create new strategy
+    download-data       Download backtesting data.
+    convert-data        Convert candle (OHLCV) data from one format to
+                        another.
+    convert-trade-data  Convert trade data from one format to another.
+    trades-to-ohlcv     Convert trade data to OHLCV data.
+    list-data           List downloaded data.
+    backtesting         Backtesting module.
+    backtesting-show    Show past Backtest results
+    backtesting-analysis
+                        Backtest Analysis module.
+    edge                Edge module.
+    hyperopt            Hyperopt module.
+    hyperopt-list       List Hyperopt results
+    hyperopt-show       Show details of Hyperopt results
+    list-exchanges      Print available exchanges.
+    list-markets        Print markets on exchange.
+    list-pairs          Print pairs on exchange.
+    list-strategies     Print available strategies.
+    list-hyperoptloss   Print available hyperopt loss functions.
+    list-freqaimodels   Print available freqAI models.
+    list-timeframes     Print available timeframes for the exchange.
+    show-trades         Show trades.
+    test-pairlist       Test your pairlist configuration.
+    convert-db          Migrate database to different system
+    install-ui          Install FreqUI
+    plot-dataframe      Plot candles with indicators.
+    plot-profit         Generate plot showing profits.
+    webserver           Webserver module.
+    strategy-updater    updates outdated strategy files to the current version
+    lookahead-analysis  Check for potential look ahead bias.
+    recursive-analysis  Check for potential recursive formula issue.
+
+options:
+  -h, --help            show this help message and exit
+  -V, --version         show program's version number and exit
+
+```

docs/commands/new-config.md

@@ -0,0 +1,12 @@
+```
+usage: freqtrade new-config [-h] [-c PATH]
+
+options:
+  -h, --help            show this help message and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+
+```

docs/commands/new-strategy.md

@@ -0,0 +1,19 @@
+```
+usage: freqtrade new-strategy [-h] [--userdir PATH] [-s NAME]
+                              [--strategy-path PATH]
+                              [--template {full,minimal,advanced}]
+
+options:
+  -h, --help            show this help message and exit
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+  -s NAME, --strategy NAME
+                        Specify strategy class name which will be used by the
+                        bot.
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --template {full,minimal,advanced}
+                        Use a template which is either `minimal`, `full`
+                        (containing multiple sample indicators) or `advanced`.
+                        Default: `full`.
+
+```

docs/commands/plot-dataframe.md

@@ -0,0 +1,82 @@
+```
+usage: freqtrade plot-dataframe [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                                [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]
+                                [--strategy-path PATH]
+                                [--recursive-strategy-search]
+                                [--freqaimodel NAME] [--freqaimodel-path PATH]
+                                [-p PAIRS [PAIRS ...]]
+                                [--indicators1 INDICATORS1 [INDICATORS1 ...]]
+                                [--indicators2 INDICATORS2 [INDICATORS2 ...]]
+                                [--plot-limit INT] [--db-url PATH]
+                                [--trade-source {DB,file}]
+                                [--export {none,trades,signals}]
+                                [--export-filename PATH]
+                                [--timerange TIMERANGE] [-i TIMEFRAME]
+                                [--no-trades]
+
+options:
+  -h, --help            show this help message and exit
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --indicators1 INDICATORS1 [INDICATORS1 ...]
+                        Set indicators from your strategy you want in the
+                        first row of the graph. Space-separated list. Example:
+                        `ema3 ema5`. Default: `['sma', 'ema3', 'ema5']`.
+  --indicators2 INDICATORS2 [INDICATORS2 ...]
+                        Set indicators from your strategy you want in the
+                        third row of the graph. Space-separated list. Example:
+                        `fastd fastk`. Default: `['macd', 'macdsignal']`.
+  --plot-limit INT      Specify tick limit for plotting. Notice: too high
+                        values cause huge files. Default: 750.
+  --db-url PATH         Override trades database URL, this is useful in custom
+                        deployments (default: `sqlite:///tradesv3.sqlite` for
+                        Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
+                        Dry Run).
+  --trade-source {DB,file}
+                        Specify the source for trades (Can be DB or file
+                        (backtest file)) Default: file
+  --export {none,trades,signals}
+                        Export backtest results (default: trades).
+  --export-filename PATH, --backtest-filename PATH
+                        Use this filename for backtest results.Requires
+                        `--export` to be set as well. Example: `--export-filen
+                        ame=user_data/backtest_results/backtest_today.json`
+  --timerange TIMERANGE
+                        Specify what timerange of data to use.
+  -i TIMEFRAME, --timeframe TIMEFRAME
+                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
+  --no-trades           Skip using trades from backtesting file and DB.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+Strategy arguments:
+  -s NAME, --strategy NAME
+                        Specify strategy class name which will be used by the
+                        bot.
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+  --freqaimodel NAME    Specify a custom freqaimodels.
+  --freqaimodel-path PATH
+                        Specify additional lookup path for freqaimodels.
+
+```

docs/commands/plot-profit.md

@@ -0,0 +1,68 @@
+```
+usage: freqtrade plot-profit [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                             [-c PATH] [-d PATH] [--userdir PATH] [-s NAME]
+                             [--strategy-path PATH]
+                             [--recursive-strategy-search]
+                             [--freqaimodel NAME] [--freqaimodel-path PATH]
+                             [-p PAIRS [PAIRS ...]] [--timerange TIMERANGE]
+                             [--export {none,trades,signals}]
+                             [--export-filename PATH] [--db-url PATH]
+                             [--trade-source {DB,file}] [-i TIMEFRAME]
+                             [--auto-open]
+
+options:
+  -h, --help            show this help message and exit
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --timerange TIMERANGE
+                        Specify what timerange of data to use.
+  --export {none,trades,signals}
+                        Export backtest results (default: trades).
+  --export-filename PATH, --backtest-filename PATH
+                        Use this filename for backtest results.Requires
+                        `--export` to be set as well. Example: `--export-filen
+                        ame=user_data/backtest_results/backtest_today.json`
+  --db-url PATH         Override trades database URL, this is useful in custom
+                        deployments (default: `sqlite:///tradesv3.sqlite` for
+                        Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
+                        Dry Run).
+  --trade-source {DB,file}
+                        Specify the source for trades (Can be DB or file
+                        (backtest file)) Default: file
+  -i TIMEFRAME, --timeframe TIMEFRAME
+                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
+  --auto-open           Automatically open generated plot.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+Strategy arguments:
+  -s NAME, --strategy NAME
+                        Specify strategy class name which will be used by the
+                        bot.
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+  --freqaimodel NAME    Specify a custom freqaimodels.
+  --freqaimodel-path PATH
+                        Specify additional lookup path for freqaimodels.
+
+```

docs/commands/recursive-analysis.md

@@ -0,0 +1,60 @@
+```
+usage: freqtrade recursive-analysis [-h] [-v] [--no-color] [--logfile FILE]
+                                    [-V] [-c PATH] [-d PATH] [--userdir PATH]
+                                    [-s NAME] [--strategy-path PATH]
+                                    [--recursive-strategy-search]
+                                    [--freqaimodel NAME]
+                                    [--freqaimodel-path PATH] [-i TIMEFRAME]
+                                    [--timerange TIMERANGE]
+                                    [--data-format-ohlcv {json,jsongz,feather,parquet}]
+                                    [-p PAIRS [PAIRS ...]]
+                                    [--startup-candle STARTUP_CANDLE [STARTUP_CANDLE ...]]
+
+options:
+  -h, --help            show this help message and exit
+  -i TIMEFRAME, --timeframe TIMEFRAME
+                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
+  --timerange TIMERANGE
+                        Specify what timerange of data to use.
+  --data-format-ohlcv {json,jsongz,feather,parquet}
+                        Storage format for downloaded candle (OHLCV) data.
+                        (default: `feather`).
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  --startup-candle STARTUP_CANDLE [STARTUP_CANDLE ...]
+                        Specify startup candles to be checked (`199`, `499`,
+                        `999`, `1999`).
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+Strategy arguments:
+  -s NAME, --strategy NAME
+                        Specify strategy class name which will be used by the
+                        bot.
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+  --freqaimodel NAME    Specify a custom freqaimodels.
+  --freqaimodel-path PATH
+                        Specify additional lookup path for freqaimodels.
+
+```

docs/commands/show-config.md

@@ -0,0 +1,16 @@
+```
+usage: freqtrade show-config [-h] [--userdir PATH] [-c PATH]
+                             [--show-sensitive]
+
+options:
+  -h, --help            show this help message and exit
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  --show-sensitive      Show secrets in the output.
+
+```

docs/commands/show-trades.md

@@ -0,0 +1,37 @@
+```
+usage: freqtrade show-trades [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                             [-c PATH] [-d PATH] [--userdir PATH]
+                             [--db-url PATH]
+                             [--trade-ids TRADE_IDS [TRADE_IDS ...]]
+                             [--print-json]
+
+options:
+  -h, --help            show this help message and exit
+  --db-url PATH         Override trades database URL, this is useful in custom
+                        deployments (default: `sqlite:///tradesv3.sqlite` for
+                        Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
+                        Dry Run).
+  --trade-ids TRADE_IDS [TRADE_IDS ...]
+                        Specify the list of trade ids.
+  --print-json          Print output in JSON format.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/strategy-updater.md

@@ -0,0 +1,41 @@
+```
+usage: freqtrade strategy-updater [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                                  [-c PATH] [-d PATH] [--userdir PATH]
+                                  [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]
+                                  [--strategy-path PATH]
+                                  [--recursive-strategy-search]
+
+options:
+  -h, --help            show this help message and exit
+  --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]
+                        Provide a space-separated list of strategies to
+                        backtest. Please note that timeframe needs to be set
+                        either in config or via command line. When using this
+                        together with `--export trades`, the strategy-name is
+                        injected into the filename (so `backtest-data.json`
+                        becomes `backtest-data-SampleStrategy.json`
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/test-pairlist.md

@@ -0,0 +1,22 @@
+```
+usage: freqtrade test-pairlist [-h] [--userdir PATH] [-v] [-c PATH]
+                               [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]]
+                               [-1] [--print-json] [--exchange EXCHANGE]
+
+options:
+  -h, --help            show this help message and exit
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  --quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]
+                        Specify quote currency(-ies). Space-separated list.
+  -1, --one-column      Print output in one column.
+  --print-json          Print list of pairs or market symbols in JSON format.
+  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
+
+```

docs/commands/trade.md

@@ -0,0 +1,55 @@
+```
+usage: freqtrade trade [-h] [-v] [--no-color] [--logfile FILE] [-V] [-c PATH]
+                       [-d PATH] [--userdir PATH] [-s NAME]
+                       [--strategy-path PATH] [--recursive-strategy-search]
+                       [--freqaimodel NAME] [--freqaimodel-path PATH]
+                       [--db-url PATH] [--sd-notify] [--dry-run]
+                       [--dry-run-wallet DRY_RUN_WALLET] [--fee FLOAT]
+
+options:
+  -h, --help            show this help message and exit
+  --db-url PATH         Override trades database URL, this is useful in custom
+                        deployments (default: `sqlite:///tradesv3.sqlite` for
+                        Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
+                        Dry Run).
+  --sd-notify           Notify systemd service manager.
+  --dry-run             Enforce dry-run for trading (removes Exchange secrets
+                        and simulates trades).
+  --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET
+                        Starting balance, used for backtesting / hyperopt and
+                        dry-runs.
+  --fee FLOAT           Specify fee ratio. Will be applied twice (on trade
+                        entry and exit).
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+Strategy arguments:
+  -s NAME, --strategy NAME
+                        Specify strategy class name which will be used by the
+                        bot.
+  --strategy-path PATH  Specify additional strategy lookup path.
+  --recursive-strategy-search
+                        Recursively search for a strategy in the strategies
+                        folder.
+  --freqaimodel NAME    Specify a custom freqaimodels.
+  --freqaimodel-path PATH
+                        Specify additional lookup path for freqaimodels.
+
+```

docs/commands/trades-to-ohlcv.md

@@ -0,0 +1,48 @@
+```
+usage: freqtrade trades-to-ohlcv [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                                 [-c PATH] [-d PATH] [--userdir PATH]
+                                 [-p PAIRS [PAIRS ...]]
+                                 [-t TIMEFRAMES [TIMEFRAMES ...]]
+                                 [--exchange EXCHANGE]
+                                 [--data-format-ohlcv {json,jsongz,feather,parquet}]
+                                 [--data-format-trades {json,jsongz,feather,parquet}]
+                                 [--trading-mode {spot,margin,futures}]
+
+options:
+  -h, --help            show this help message and exit
+  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
+                        Limit command to these pairs. Pairs are space-
+                        separated.
+  -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]
+                        Specify which tickers to download. Space-separated
+                        list. Default: `1m 5m`.
+  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
+  --data-format-ohlcv {json,jsongz,feather,parquet}
+                        Storage format for downloaded candle (OHLCV) data.
+                        (default: `feather`).
+  --data-format-trades {json,jsongz,feather,parquet}
+                        Storage format for downloaded trades data. (default:
+                        `feather`).
+  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
+                        Select Trading mode
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/commands/webserver.md

@@ -0,0 +1,27 @@
+```
+usage: freqtrade webserver [-h] [-v] [--no-color] [--logfile FILE] [-V]
+                           [-c PATH] [-d PATH] [--userdir PATH]
+
+options:
+  -h, --help            show this help message and exit
+
+Common arguments:
+  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
+  --no-color            Disable colorization of hyperopt results. May be
+                        useful if you are redirecting output to a file.
+  --logfile FILE, --log-file FILE
+                        Log to the file specified. Special values are:
+                        'syslog', 'journald'. See the documentation for more
+                        details.
+  -V, --version         show program's version number and exit
+  -c PATH, --config PATH
+                        Specify configuration file (default:
+                        `userdir/config.json` or `config.json` whichever
+                        exists). Multiple --config options may be used. Can be
+                        set to `-` to read config from stdin.
+  -d PATH, --datadir PATH, --data-dir PATH
+                        Path to directory with historical backtesting data.
+  --userdir PATH, --user-data-dir PATH
+                        Path to userdata directory.
+
+```

docs/configuration.md

@@ -39,13 +39,19 @@ Please note that Environment variables will overwrite corresponding settings in
 
 Common example:
 
-```
+``` bash
 FREQTRADE__TELEGRAM__CHAT_ID=<telegramchatid>
 FREQTRADE__TELEGRAM__TOKEN=<telegramToken>
 FREQTRADE__EXCHANGE__KEY=<yourExchangeKey>
 FREQTRADE__EXCHANGE__SECRET=<yourExchangeSecret>
 ```
 
+Json lists are parsed as json - so you can use the following to set a list of pairs:
+
+``` bash
+export FREQTRADE__EXCHANGE__PAIR_WHITELIST='["BTC/USDT", "ETH/USDT"]'
+```
+
 !!! Note
     Environment variables detected are logged at startup - so if you can't find why a value is not what you think it should be based on the configuration, make sure it's not loaded from an environment variable.
 
@@ -54,7 +60,7 @@ FREQTRADE__EXCHANGE__SECRET=<yourExchangeSecret>
 
 ??? Warning "Loading sequence"
     Environment variables are loaded after the initial configuration. As such, you cannot provide the path to the configuration through environment variables. Please use `--config path/to/config.json` for that.
-    This also applies to user_dir to some degree. while the user directory can be set through environment variables - the configuration will **not** be loaded from that location.
+    This also applies to `user_dir` to some degree. while the user directory can be set through environment variables - the configuration will **not** be loaded from that location.
 
 ### Multiple configuration files
 
@@ -168,7 +174,7 @@ Mandatory parameters are marked as **Required**, which means that they are requi
 | `timeframe` | The timeframe to use (e.g `1m`, `5m`, `15m`, `30m`, `1h` ...). Usually missing in configuration, and specified in the strategy. [Strategy Override](#parameters-in-the-strategy). <br> **Datatype:** String
 | `fiat_display_currency` | Fiat currency used to show your profits. [More information below](#what-values-can-be-used-for-fiat_display_currency). <br> **Datatype:** String
 | `dry_run` | **Required.** Define if the bot must be in Dry Run or production mode. <br>*Defaults to `true`.* <br> **Datatype:** Boolean
-| `dry_run_wallet` | Define the starting amount in stake currency for the simulated wallet used by the bot running in Dry Run mode.<br>*Defaults to `1000`.* <br> **Datatype:** Float
+| `dry_run_wallet` | Define the starting amount in stake currency for the simulated wallet used by the bot running in Dry Run mode. [More information below](#dry-run-wallet)<br>*Defaults to `1000`.* <br> **Datatype:** Float or Dict
 | `cancel_open_orders_on_exit` | Cancel open orders when the `/stop` RPC command is issued, `Ctrl+C` is pressed or the bot dies unexpectedly. When set to `true`, this allows you to use `/stop` to cancel unfilled and partially filled orders in the event of a market crash. It does not impact open positions. <br>*Defaults to `false`.* <br> **Datatype:** Boolean
 | `process_only_new_candles` | Enable processing of indicators only when new candles arrive. If false each loop populates the indicators, this will mean the same candle is processed many times creating system load but can be useful of your strategy depends on tick data not only candle. [Strategy Override](#parameters-in-the-strategy). <br>*Defaults to `true`.*  <br> **Datatype:** Boolean
 | `minimal_roi` | **Required.** Set the threshold as ratio the bot will use to exit a trade. [More information below](#understand-minimal_roi). [Strategy Override](#parameters-in-the-strategy). <br> **Datatype:** Dict
@@ -225,6 +231,7 @@ Mandatory parameters are marked as **Required**, which means that they are requi
 | `exchange.skip_open_order_update` | Skips open order updates on startup should the exchange cause problems. Only relevant in live conditions.<br>*Defaults to `false`*<br> **Datatype:** Boolean
 | `exchange.unknown_fee_rate` | Fallback value to use when calculating trading fees. This can be useful for exchanges which have fees in non-tradable currencies. The value provided here will be multiplied with the "fee cost".<br>*Defaults to `None`<br> **Datatype:** float
 | `exchange.log_responses` | Log relevant exchange responses. For debug mode only - use with care.<br>*Defaults to `false`*<br> **Datatype:** Boolean
+| `exchange.only_from_ccxt` | Prevent data-download from data.binance.vision. Leaving this as false can greatly speed up downloads, but may be problematic if the site is not available.<br>*Defaults to `false`*<br> **Datatype:** Boolean
 | `experimental.block_bad_exchanges` | Block exchanges known to not work with freqtrade. Leave on default unless you want to test if that exchange works now. <br>*Defaults to `true`.* <br> **Datatype:** Boolean
 | | **Plugins**
 | `edge.*` | Please refer to [edge configuration document](edge.md) for detailed explanation of all possible configuration options.
@@ -323,6 +330,25 @@ To limit this calculation in case of large stoploss values, the calculated minim
 !!! Warning
     Since the limits on exchanges are usually stable and are not updated often, some pairs can show pretty high minimum limits, simply because the price increased a lot since the last limit adjustment by the exchange. Freqtrade adjusts the stake-amount to this value, unless it's > 30% more than the calculated/desired stake-amount - in which case the trade is rejected.
 
+#### Dry-run wallet
+
+When running in dry-run mode, the bot will use a simulated wallet to execute trades. The starting balance of this wallet is defined by `dry_run_wallet` (defaults to 1000).
+For more complex scenarios, you can also assign a dictionary to `dry_run_wallet` to define the starting balance for each currency.
+
+```json
+"dry_run_wallet": {
+    "BTC": 0.01,
+    "ETH": 2,
+    "USDT": 1000
+}
+```
+
+Command line options (`--dry-run-wallet`) can be used to override the configuration value, but only for the float value, not for the dictionary. If you'd like to use the dictionary, please adjust the configuration file.
+
+!!! Note
+    Balances not in stake-currency will not be used for trading, but are shown as part of the wallet balance.
+    On Cross-margin exchanges, the wallet balance may be used to calculate the available collateral for trading.
+
 #### Tradable balance
 
 By default, the bot assumes that the `complete amount - 1%` is at it's disposal, and when using [dynamic stake amount](#dynamic-stake-amount), it will split the complete balance into `max_open_trades` buckets per trade.

docs/data-download.md

@@ -16,76 +16,7 @@ You can use a relative timerange (`--days 20`) or an absolute starting point (`-
 
 ### Usage
 
-```
-usage: freqtrade download-data [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                               [-d PATH] [--userdir PATH]
-                               [-p PAIRS [PAIRS ...]] [--pairs-file FILE]
-                               [--days INT] [--new-pairs-days INT]
-                               [--include-inactive-pairs]
-                               [--timerange TIMERANGE] [--dl-trades]
-                               [--convert] [--exchange EXCHANGE]
-                               [-t TIMEFRAMES [TIMEFRAMES ...]] [--erase]
-                               [--data-format-ohlcv {json,jsongz,hdf5,feather,parquet}]
-                               [--data-format-trades {json,jsongz,hdf5,feather,parquet}]
-                               [--trading-mode {spot,margin,futures}]
-                               [--prepend]
-
-options:
-  -h, --help            show this help message and exit
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  --pairs-file FILE     File containing a list of pairs. Takes precedence over
-                        --pairs or pairs configured in the configuration.
-  --days INT            Download data for given number of days.
-  --new-pairs-days INT  Download data of new pairs for given number of days.
-                        Default: `None`.
-  --include-inactive-pairs
-                        Also download data from inactive pairs.
-  --timerange TIMERANGE
-                        Specify what timerange of data to use.
-  --dl-trades           Download trades instead of OHLCV data. The bot will
-                        resample trades to the desired timeframe as specified
-                        as --timeframes/-t.
-  --convert             Convert downloaded trades to OHLCV data. Only
-                        applicable in combination with `--dl-trades`. Will be
-                        automatic for exchanges which don't have historic
-                        OHLCV (e.g. Kraken). If not provided, use `trades-to-
-                        ohlcv` to convert trades data to OHLCV data.
-  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
-  -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]
-                        Specify which tickers to download. Space-separated
-                        list. Default: `1m 5m`.
-  --erase               Clean all existing data for the selected
-                        exchange/pairs/timeframes.
-  --data-format-ohlcv {json,jsongz,hdf5,feather,parquet}
-                        Storage format for downloaded candle (OHLCV) data.
-                        (default: `feather`).
-  --data-format-trades {json,jsongz,hdf5,feather,parquet}
-                        Storage format for downloaded trades data. (default:
-                        `feather`).
-  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
-                        Select Trading mode
-  --prepend             Allow data prepending. (Data-appending is disabled)
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/download-data.md"
 
 !!! Tip "Downloading all data for one quote currency"
     Often, you'll want to download data for all pairs of a specific quote-currency. In such cases, you can use the following shorthand:
@@ -162,7 +93,6 @@ Freqtrade currently supports the following data-formats:
 * `feather` - a dataformat based on Apache Arrow
 * `json` -  plain "text" json files
 * `jsongz` - a gzip-zipped version of json files
-* `hdf5` - a high performance datastore
 * `parquet` - columnar datastore (OHLCV only)
 
 By default, both OHLCV data and trades data are stored in the `feather` format.
@@ -172,8 +102,8 @@ To persist this change, you should also add the following snippet to your config
 
 ``` jsonc
     // ...
-    "dataformat_ohlcv": "hdf5",
-    "dataformat_trades": "hdf5",
+    "dataformat_ohlcv": "feather",
+    "dataformat_trades": "feather",
     // ...
 ```
 
@@ -211,7 +141,6 @@ time freqtrade list-data --show-timerange --data-format-ohlcv <dataformat>
 | `feather` | 72Mb | 3.5s |
 | `json` | 149Mb | 25.6s |
 | `jsongz` | 39Mb | 27s |
-| `hdf5` | 145Mb | 3.9s |
 | `parquet` | 83Mb | 3.8s |
 
 Size has been taken from the BTC/USDT 1m spot combination for the timerange specified above.
@@ -249,55 +178,7 @@ Mixing different stake-currencies is allowed for this file, since it's only used
 
 ## Sub-command convert data
 
-```
-usage: freqtrade convert-data [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                              [-d PATH] [--userdir PATH]
-                              [-p PAIRS [PAIRS ...]] --format-from
-                              {json,jsongz,hdf5,feather,parquet} --format-to
-                              {json,jsongz,hdf5,feather,parquet} [--erase]
-                              [--exchange EXCHANGE]
-                              [-t TIMEFRAMES [TIMEFRAMES ...]]
-                              [--trading-mode {spot,margin,futures}]
-                              [--candle-types {spot,futures,mark,index,premiumIndex,funding_rate} [{spot,futures,mark,index,premiumIndex,funding_rate} ...]]
-
-options:
-  -h, --help            show this help message and exit
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  --format-from {json,jsongz,hdf5,feather,parquet}
-                        Source format for data conversion.
-  --format-to {json,jsongz,hdf5,feather,parquet}
-                        Destination format for data conversion.
-  --erase               Clean all existing data for the selected
-                        exchange/pairs/timeframes.
-  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
-  -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]
-                        Specify which tickers to download. Space-separated
-                        list. Default: `1m 5m`.
-  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
-                        Select Trading mode
-  --candle-types {spot,futures,mark,index,premiumIndex,funding_rate} [{spot,futures,mark,index,premiumIndex,funding_rate} ...]
-                        Select candle type to convert. Defaults to all
-                        available types.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-```
+--8<-- "commands/convert-data.md"
 
 ### Example converting data
 
@@ -310,46 +191,7 @@ freqtrade convert-data --format-from json --format-to jsongz --datadir ~/.freqtr
 
 ## Sub-command convert trade data
 
-```
-usage: freqtrade convert-trade-data [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                    [-d PATH] [--userdir PATH]
-                                    [-p PAIRS [PAIRS ...]] --format-from
-                                    {json,jsongz,hdf5,feather,parquet}
-                                    --format-to
-                                    {json,jsongz,hdf5,feather,parquet}
-                                    [--erase] [--exchange EXCHANGE]
-
-options:
-  -h, --help            show this help message and exit
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  --format-from {json,jsongz,hdf5,feather,parquet}
-                        Source format for data conversion.
-  --format-to {json,jsongz,hdf5,feather,parquet}
-                        Destination format for data conversion.
-  --erase               Clean all existing data for the selected
-                        exchange/pairs/timeframes.
-  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/convert-trade-data.md"
 
 ### Example converting trades
 
@@ -365,49 +207,7 @@ freqtrade convert-trade-data --format-from jsongz --format-to json --datadir ~/.
 When you need to use `--dl-trades` (kraken only) to download data, conversion of trades data to ohlcv data is the last step.
 This command will allow you to repeat this last step for additional timeframes without re-downloading the data.
 
-```
-usage: freqtrade trades-to-ohlcv [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                 [-d PATH] [--userdir PATH]
-                                 [-p PAIRS [PAIRS ...]]
-                                 [-t TIMEFRAMES [TIMEFRAMES ...]]
-                                 [--exchange EXCHANGE]
-                                 [--data-format-ohlcv {json,jsongz,hdf5,feather,parquet}]
-                                 [--data-format-trades {json,jsongz,hdf5,feather}]
-
-options:
-  -h, --help            show this help message and exit
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  -t TIMEFRAMES [TIMEFRAMES ...], --timeframes TIMEFRAMES [TIMEFRAMES ...]
-                        Specify which tickers to download. Space-separated
-                        list. Default: `1m 5m`.
-  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
-  --data-format-ohlcv {json,jsongz,hdf5,feather,parquet}
-                        Storage format for downloaded candle (OHLCV) data.
-                        (default: `feather`).
-  --data-format-trades {json,jsongz,hdf5,feather}
-                        Storage format for downloaded trades data. (default:
-                        `feather`).
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/trades-to-ohlcv.md"
 
 ### Example trade-to-ohlcv conversion
 
@@ -419,51 +219,7 @@ freqtrade trades-to-ohlcv --exchange kraken -t 5m 1h 1d --pairs BTC/EUR ETH/EUR
 
 You can get a list of downloaded data using the `list-data` sub-command.
 
-```
-usage: freqtrade list-data [-h] [-v] [--logfile FILE] [-V] [-c PATH] [-d PATH]
-                           [--userdir PATH] [--exchange EXCHANGE]
-                           [--data-format-ohlcv {json,jsongz,hdf5,feather,parquet}]
-                           [--data-format-trades {json,jsongz,hdf5,feather,parquet}]
-                           [--trades] [-p PAIRS [PAIRS ...]]
-                           [--trading-mode {spot,margin,futures}]
-                           [--show-timerange]
-
-options:
-  -h, --help            show this help message and exit
-  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
-  --data-format-ohlcv {json,jsongz,hdf5,feather,parquet}
-                        Storage format for downloaded candle (OHLCV) data.
-                        (default: `feather`).
-  --data-format-trades {json,jsongz,hdf5,feather,parquet}
-                        Storage format for downloaded trades data. (default:
-                        `feather`).
-  --trades              Work on trades data instead of OHLCV data.
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
-                        Select Trading mode
-  --show-timerange      Show timerange available for available data. (May take
-                        a while to calculate).
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/list-data.md"
 
 ### Example list-data
 

docs/deprecated.md

@@ -81,4 +81,10 @@ version 2023.3 saw the removal of `populate_any_indicators` in favor of split me
 
 ## Removal of `protections` from configuration
 
- Setting protections from the configuration via `"protections": [],` has been removed in 2024.10, after having raised deprecation warnings for over 3 years.
+Setting protections from the configuration via `"protections": [],` has been removed in 2024.10, after having raised deprecation warnings for over 3 years.
+
+## hdf5 data storage
+
+Using hdf5 as data storage has been deprecated in 2024.12 and was removed in 2025.1. We recommend switching to the feather data format.
+
+Please use the [`convert-data` subcommand](data-download.md#sub-command-convert-data) to convert your existing data to one of the supported formats before updating.

docs/edge.md

@@ -215,64 +215,7 @@ Let's say the stake currency is **ETH** and there is $10$ **ETH** on the wallet.
 
 ## Edge command reference
 
-```
-usage: freqtrade edge [-h] [-v] [--logfile FILE] [-V] [-c PATH] [-d PATH]
-                      [--userdir PATH] [-s NAME] [--strategy-path PATH]
-                      [-i TIMEFRAME] [--timerange TIMERANGE]
-                      [--data-format-ohlcv {json,jsongz,hdf5}]
-                      [--max-open-trades INT] [--stake-amount STAKE_AMOUNT]
-                      [--fee FLOAT] [-p PAIRS [PAIRS ...]]
-                      [--stoplosses STOPLOSS_RANGE]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  -i TIMEFRAME, --timeframe TIMEFRAME
-                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
-  --timerange TIMERANGE
-                        Specify what timerange of data to use.
-  --data-format-ohlcv {json,jsongz,hdf5}
-                        Storage format for downloaded candle (OHLCV) data.
-                        (default: `None`).
-  --max-open-trades INT
-                        Override the value of the `max_open_trades`
-                        configuration setting.
-  --stake-amount STAKE_AMOUNT
-                        Override the value of the `stake_amount` configuration
-                        setting.
-  --fee FLOAT           Specify fee ratio. Will be applied twice (on trade
-                        entry and exit).
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  --stoplosses STOPLOSS_RANGE
-                        Defines a range of stoploss values against which edge
-                        will assess the strategy. The format is "min,max,step"
-                        (without any space). Example:
-                        `--stoplosses=-0.01,-0.1,-0.001`
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-Strategy arguments:
-  -s NAME, --strategy NAME
-                        Specify strategy class name which will be used by the
-                        bot.
-  --strategy-path PATH  Specify additional strategy lookup path.
-
-```
+--8<-- "commands/edge.md"
 
 ## Configurations
 

docs/exchanges.md

@@ -118,7 +118,7 @@ When trading on Binance Futures market, orderbook must be used because there is
   },
 ```
 
-#### Binance futures settings
+#### Binance isolated futures settings
 
 Users will also have to have the futures-setting "Position Mode" set to "One-way Mode", and "Asset Mode" set to "Single-Asset Mode".
 These settings will be checked on startup, and freqtrade will show an error if this setting is wrong.
@@ -127,6 +127,27 @@ These settings will be checked on startup, and freqtrade will show an error if t
 
 Freqtrade will not attempt to change these settings.
 
+#### Binance BNFCR futures
+
+BNFCR mode are a special type of futures mode on Binance to work around regulatory issues in Europe.  
+To use BNFCR futures, you will have to have the following combination of settings:
+
+``` jsonc
+{
+    // ...
+    "trading_mode": "futures",
+    "margin_mode": "cross",
+    "proxy_coin": "BNFCR",
+    "stake_currency": "USDT" // or "USDC"
+    // ...
+}
+```
+
+The `stake_currency` setting defines the markets the bot will be operating in. This choice is really arbitrary.
+
+On the exchange, you'll have to use "Multi-asset Mode" - and "Position Mode set to "One-way Mode".  
+Freqtrade will check these settings on startup, but won't attempt to change them.
+
 ## Bingx
 
 BingX supports [time_in_force](configuration.md#understand-order_time_in_force) with settings "GTC" (good till cancelled), "IOC" (immediate-or-cancel) and "PO" (Post only) settings.
@@ -189,7 +210,7 @@ freqtrade download-data --exchange kraken --dl-trades -p BTC/EUR BCH/EUR
     It will also take a long time, as freqtrade will need to download every single trade that happened on the exchange for the pair / timerange combination, therefore please be patient.
 
 !!! Warning "rateLimit tuning"
-    Please pay attention that rateLimit configuration entry holds delay in milliseconds between requests, NOT requests\sec rate.
+    Please pay attention that rateLimit configuration entry holds delay in milliseconds between requests, NOT requests/sec rate.
     So, in order to mitigate Kraken API "Rate limit exceeded" exception, this configuration should be increased, NOT decreased.
 
 ## Kucoin
@@ -217,12 +238,12 @@ Kucoin supports [time_in_force](configuration.md#understand-order_time_in_force)
 For Kucoin, it is suggested to add `"KCS/<STAKE>"` to your blacklist to avoid issues, unless you are willing to maintain enough extra `KCS` on the account or unless you're willing to disable using `KCS` for fees. 
 Kucoin accounts may use `KCS` for fees, and if a trade happens to be on `KCS`, further trades may consume this position and make the initial `KCS` trade unsellable as the expected amount is not there anymore.
 
-## HTX (formerly Huobi)
+## HTX
 
 !!! Tip "Stoploss on Exchange"
     HTX supports `stoploss_on_exchange` and uses `stop-limit` orders. It provides great advantages, so we recommend to benefit from it by enabling stoploss on exchange.
 
-## OKX (former OKEX)
+## OKX
 
 OKX requires a passphrase for each api key, you will therefore need to add this key into the configuration so your exchange section looks as follows:
 
@@ -236,6 +257,9 @@ OKX requires a passphrase for each api key, you will therefore need to add this
 }
 ```
 
+If you've registered with OKX on the host my.okx.com (OKX EAA)- you will need to use `"myokx"` as the exchange name.
+Using the wrong exchange will result in the error "OKX Error 50119: API key doesn't exist" - as the 2 are separate entities.
+
 !!! Warning
     OKX only provides 100 candles per api call. Therefore, the strategy will only have a pretty low amount of data available in backtesting mode.
 

docs/faq.md

@@ -40,12 +40,18 @@ This could be caused by the following reasons:
 * The installation did not complete successfully.
   * Please check the [Installation documentation](installation.md).
 
+### The bot starts, but in STOPPED mode
+
+Make sure you set the `initial_state` config option to `"running"` in your config.json
+
 ### I have waited 5 minutes, why hasn't the bot made any trades yet?
 
-* Depending on the buy strategy, the amount of whitelisted coins, the
-situation of the market etc, it can take up to hours to find a good entry
+* Depending on the entry strategy, the amount of whitelisted coins, the
+situation of the market etc, it can take up to hours or days to find a good entry
 position for a trade. Be patient!
 
+* Backtesting will tell you roughly how many trades to expect - but that won't guarantee that they'll be distributed evenly across time - so you could have 20 trades on one day, and 0 for the rest of the week.
+
 * It may be because of a configuration error. It's best to check the logs, they usually tell you if the bot is simply not getting buy signals (only heartbeat messages), or if there is something wrong (errors / exceptions in the log).
 
 ### I have made 12 trades already, why is my total profit negative?
@@ -129,6 +135,10 @@ This message is a warning that the candles had a price jump of > 30%.
 This might be a sign that the pair stopped trading, and some token exchange took place (e.g. COCOS in 2021 - where price jumped from 0.0000154 to 0.01621).
 This message is often accompanied by ["Missing data fillup"](#im-getting-missing-data-fillup-messages-in-the-log) - as trading on such pairs is often stopped for some time.
 
+### I want to reset the bot's database
+
+To reset the bot's database, you can either delete the database (by default `tradesv3.sqlite` or `tradesv3.dryrun.sqlite`), or use a different database url via `--db-url` (e.g. `sqlite:///mynewdatabase.sqlite`).
+
 ### I'm getting "Outdated history for pair xxx" in the log
 
 The bot is trying to tell you that it got an outdated last candle (not the last complete candle).

docs/freqai.md

@@ -18,7 +18,7 @@ Features include:
 * **Extensibility** - The generalized and robust architecture allows for incorporating any [machine learning library/method](freqai-configuration.md#using-different-prediction-models) available in Python. Eight examples are currently available, including classifiers, regressors, and a convolutional neural network
 * **Smart outlier removal** - Remove outliers from training and prediction data sets using a variety of [outlier detection techniques](freqai-feature-engineering.md#outlier-detection)
 * **Crash resilience** - Store trained models to disk to make reloading from a crash fast and easy, and [purge obsolete files](freqai-running.md#purging-old-model-data) for sustained dry/live runs
-* **Automatic data normalization** - [Normalize the data](freqai-feature-engineering.md#feature-normalization) in a smart and statistically safe way
+* **Automatic data normalization** - [Normalize the data](freqai-feature-engineering.md#building-the-data-pipeline) in a smart and statistically safe way
 * **Automatic data download** - Compute timeranges for data downloads and update historic data (in live deployments)
 * **Cleaning of incoming data** - Handle NaNs safely before training and model inferencing
 * **Dimensionality reduction** - Reduce the size of the training data via [Principal Component Analysis](freqai-feature-engineering.md#data-dimensionality-reduction-with-principal-component-analysis)
@@ -76,14 +76,14 @@ pip install -r requirements-freqai.txt
 
 ### Usage with docker
 
-If you are using docker, a dedicated tag with FreqAI dependencies is available as `:freqai`. As such - you can replace the image line in your docker compose file with `image: freqtradeorg/freqtrade:develop_freqai`. This image contains the regular FreqAI dependencies. Similar to native installs, Catboost will not be available on ARM based devices. If you would like to use PyTorch or Reinforcement learning, you should use the torch or RL tags, `image: freqtradeorg/freqtrade:develop_freqaitorch`, `image: freqtradeorg/freqtrade:develop_freqairl`.
+If you are using docker, a dedicated tag with FreqAI dependencies is available as `:freqai`. As such - you can replace the image line in your docker compose file with `image: freqtradeorg/freqtrade:stable_freqai`. This image contains the regular FreqAI dependencies. Similar to native installs, Catboost will not be available on ARM based devices. If you would like to use PyTorch or Reinforcement learning, you should use the torch or RL tags, `image: freqtradeorg/freqtrade:stable_freqaitorch`, `image: freqtradeorg/freqtrade:stable_freqairl`.
 
 !!! note "docker-compose-freqai.yml"
    We do provide an explicit docker-compose file for this in `docker/docker-compose-freqai.yml` - which can be used via `docker compose -f docker/docker-compose-freqai.yml run ...` - or can be copied to replace the original docker file. This docker-compose file also contains a (disabled) section to enable GPU resources within docker containers. This obviously assumes the system has GPU resources available.
 
 ### FreqAI position in open-source machine learning landscape
 
-Forecasting chaotic time-series based systems, such as equity/cryptocurrency markets, requires a broad set of tools geared toward testing a wide range of hypotheses. Fortunately, a recent maturation of robust machine learning libraries (e.g. `scikit-learn`) has opened up a wide range of research possibilities. Scientists from a diverse range of fields can now easily prototype their studies on an abundance of established machine learning algorithms. Similarly, these user-friendly libraries enable "citzen scientists" to use their basic Python skills for data exploration. However, leveraging these machine learning libraries on historical and live chaotic data sources can be logistically difficult and expensive. Additionally, robust data collection, storage, and handling presents a disparate challenge. [`FreqAI`](#freqai) aims to provide a generalized and extensible open-sourced framework geared toward live deployments of adaptive modeling for market forecasting. The `FreqAI` framework is effectively a sandbox for the rich world of open-source machine learning libraries. Inside the `FreqAI` sandbox, users find they can combine a wide variety of third-party libraries to test creative hypotheses on a free live 24/7 chaotic data source - cryptocurrency exchange data. 
+Forecasting chaotic time-series based systems, such as equity/cryptocurrency markets, requires a broad set of tools geared toward testing a wide range of hypotheses. Fortunately, a recent maturation of robust machine learning libraries (e.g. `scikit-learn`) has opened up a wide range of research possibilities. Scientists from a diverse range of fields can now easily prototype their studies on an abundance of established machine learning algorithms. Similarly, these user-friendly libraries enable "citizen scientists" to use their basic Python skills for data exploration. However, leveraging these machine learning libraries on historical and live chaotic data sources can be logistically difficult and expensive. Additionally, robust data collection, storage, and handling presents a disparate challenge. [`FreqAI`](#freqai) aims to provide a generalized and extensible open-sourced framework geared toward live deployments of adaptive modeling for market forecasting. The `FreqAI` framework is effectively a sandbox for the rich world of open-source machine learning libraries. Inside the `FreqAI` sandbox, users find they can combine a wide variety of third-party libraries to test creative hypotheses on a free live 24/7 chaotic data source - cryptocurrency exchange data. 
 
 ### Citing FreqAI
 

docs/hyperopt.md

@@ -36,127 +36,7 @@ pip install -r requirements-hyperopt.txt
 
 ## Hyperopt command reference
 
-```
-usage: freqtrade hyperopt [-h] [-v] [--logfile FILE] [-V] [-c PATH] [-d PATH]
-                          [--userdir PATH] [-s NAME] [--strategy-path PATH]
-                          [--recursive-strategy-search] [--freqaimodel NAME]
-                          [--freqaimodel-path PATH] [-i TIMEFRAME]
-                          [--timerange TIMERANGE]
-                          [--data-format-ohlcv {json,jsongz,hdf5,feather,parquet}]
-                          [--max-open-trades INT]
-                          [--stake-amount STAKE_AMOUNT] [--fee FLOAT]
-                          [-p PAIRS [PAIRS ...]] [--hyperopt-path PATH]
-                          [--eps] [--enable-protections]
-                          [--dry-run-wallet DRY_RUN_WALLET]
-                          [--timeframe-detail TIMEFRAME_DETAIL] [-e INT]
-                          [--spaces {all,buy,sell,roi,stoploss,trailing,protection,trades,default} [{all,buy,sell,roi,stoploss,trailing,protection,trades,default} ...]]
-                          [--print-all] [--no-color] [--print-json] [-j JOBS]
-                          [--random-state INT] [--min-trades INT]
-                          [--hyperopt-loss NAME] [--disable-param-export]
-                          [--ignore-missing-spaces] [--analyze-per-epoch]
-
-options:
-  -h, --help            show this help message and exit
-  -i TIMEFRAME, --timeframe TIMEFRAME
-                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
-  --timerange TIMERANGE
-                        Specify what timerange of data to use.
-  --data-format-ohlcv {json,jsongz,hdf5,feather,parquet}
-                        Storage format for downloaded candle (OHLCV) data.
-                        (default: `feather`).
-  --max-open-trades INT
-                        Override the value of the `max_open_trades`
-                        configuration setting.
-  --stake-amount STAKE_AMOUNT
-                        Override the value of the `stake_amount` configuration
-                        setting.
-  --fee FLOAT           Specify fee ratio. Will be applied twice (on trade
-                        entry and exit).
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  --hyperopt-path PATH  Specify additional lookup path for Hyperopt Loss
-                        functions.
-  --eps, --enable-position-stacking
-                        Allow buying the same pair multiple times (position
-                        stacking).
-  --enable-protections, --enableprotections
-                        Enable protections for backtesting.Will slow
-                        backtesting down by a considerable amount, but will
-                        include configured protections
-  --dry-run-wallet DRY_RUN_WALLET, --starting-balance DRY_RUN_WALLET
-                        Starting balance, used for backtesting / hyperopt and
-                        dry-runs.
-  --timeframe-detail TIMEFRAME_DETAIL
-                        Specify detail timeframe for backtesting (`1m`, `5m`,
-                        `30m`, `1h`, `1d`).
-  -e INT, --epochs INT  Specify number of epochs (default: 100).
-  --spaces {all,buy,sell,roi,stoploss,trailing,protection,trades,default} [{all,buy,sell,roi,stoploss,trailing,protection,trades,default} ...]
-                        Specify which parameters to hyperopt. Space-separated
-                        list.
-  --print-all           Print all results, not only the best ones.
-  --no-color            Disable colorization of hyperopt results. May be
-                        useful if you are redirecting output to a file.
-  --print-json          Print output in JSON format.
-  -j JOBS, --job-workers JOBS
-                        The number of concurrently running jobs for
-                        hyperoptimization (hyperopt worker processes). If -1
-                        (default), all CPUs are used, for -2, all CPUs but one
-                        are used, etc. If 1 is given, no parallel computing
-                        code is used at all.
-  --random-state INT    Set random state to some positive integer for
-                        reproducible hyperopt results.
-  --min-trades INT      Set minimal desired number of trades for evaluations
-                        in the hyperopt optimization path (default: 1).
-  --hyperopt-loss NAME, --hyperoptloss NAME
-                        Specify the class name of the hyperopt loss function
-                        class (IHyperOptLoss). Different functions can
-                        generate completely different results, since the
-                        target for optimization is different. Built-in
-                        Hyperopt-loss-functions are:
-                        ShortTradeDurHyperOptLoss, OnlyProfitHyperOptLoss,
-                        SharpeHyperOptLoss, SharpeHyperOptLossDaily,
-                        SortinoHyperOptLoss, SortinoHyperOptLossDaily,
-                        CalmarHyperOptLoss, MaxDrawDownHyperOptLoss,
-                        MaxDrawDownRelativeHyperOptLoss,
-                        ProfitDrawDownHyperOptLoss
-  --disable-param-export
-                        Disable automatic hyperopt parameter export.
-  --ignore-missing-spaces, --ignore-unparameterized-spaces
-                        Suppress errors for any requested Hyperopt spaces that
-                        do not contain any parameters.
-  --analyze-per-epoch   Run populate_indicators once per epoch.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-Strategy arguments:
-  -s NAME, --strategy NAME
-                        Specify strategy class name which will be used by the
-                        bot.
-  --strategy-path PATH  Specify additional strategy lookup path.
-  --recursive-strategy-search
-                        Recursively search for a strategy in the strategies
-                        folder.
-  --freqaimodel NAME    Specify a custom freqaimodels.
-  --freqaimodel-path PATH
-                        Specify additional lookup path for freqaimodels.
-
-```
+--8<-- "commands/hyperopt.md"
 
 ### Hyperopt checklist
 

docs/index.md

@@ -44,10 +44,11 @@ Please read the [exchange specific notes](exchanges.md) to learn about eventual,
 - [X] [Bitmart](https://bitmart.com/)
 - [X] [Bybit](https://bybit.com/)
 - [X] [Gate.io](https://www.gate.io/ref/6266643)
-- [X] [HTX](https://www.htx.com/) (Former Huobi)
+- [X] [HTX](https://www.htx.com/)
 - [X] [Hyperliquid](https://hyperliquid.xyz/) (A decentralized exchange, or DEX)
 - [X] [Kraken](https://kraken.com/)
-- [X] [OKX](https://okx.com/) (Former OKEX)
+- [X] [OKX](https://okx.com/)
+- [X] [MyOKX](https://okx.com/) (OKX EEA)
 - [ ] [potentially many others through <img alt="ccxt" width="30px" src="assets/ccxt-logo.svg" />](https://github.com/ccxt/ccxt/). _(We cannot guarantee they will work)_
 
 ### Supported Futures Exchanges (experimental)

docs/leverage.md

@@ -82,7 +82,7 @@ Each market(trading pair), keeps collateral in a separate account
 "margin_mode": "isolated"
 ```
 
-#### Cross margin mode (currently unavailable)
+#### Cross margin mode
 
 One account is used to share collateral between markets (trading pairs). Margin is taken from total account balance to avoid liquidation when needed.
 

docs/lookahead-analysis.md

@@ -29,39 +29,7 @@ Those are set to avoid users accidentally generating false positives.
 
 ## Lookahead-analysis command reference
 
-```
-usage: freqtrade lookahead-analysis [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                    [-d PATH] [--userdir PATH] [-s NAME]
-                                    [--strategy-path PATH]
-                                    [--recursive-strategy-search]
-                                    [--freqaimodel NAME]
-                                    [--freqaimodel-path PATH] [-i TIMEFRAME]
-                                    [--timerange TIMERANGE]
-                                    [--data-format-ohlcv {json,jsongz,hdf5,feather,parquet}]
-                                    [--max-open-trades INT]
-                                    [--stake-amount STAKE_AMOUNT]
-                                    [--fee FLOAT] [-p PAIRS [PAIRS ...]]
-                                    [--dry-run-wallet DRY_RUN_WALLET]
-                                    [--timeframe-detail TIMEFRAME_DETAIL]
-                                    [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]
-                                    [--export {none,trades,signals}]
-                                    [--export-filename PATH]
-                                    [--breakdown {day,week,month} [{day,week,month} ...]]
-                                    [--cache {none,day,week,month}]
-                                    [--freqai-backtest-live-models]
-                                    [--minimum-trade-amount INT]
-                                    [--targeted-trade-amount INT]
-                                    [--lookahead-analysis-exportfilename LOOKAHEAD_ANALYSIS_EXPORTFILENAME]
-
-options:
-  --minimum-trade-amount INT
-                        Minimum trade amount for lookahead-analysis
-  --targeted-trade-amount INT
-                        Targeted trade amount for lookahead analysis
-  --lookahead-analysis-exportfilename LOOKAHEAD_ANALYSIS_EXPORTFILENAME
-                        Use this csv-filename to store lookahead-analysis-
-                        results
-```
+--8<-- "commands/lookahead-analysis.md"
 
 !!! Note ""
     The above Output was reduced to options `lookahead-analysis` adds on top of regular backtesting commands.

docs/plotting.md

@@ -30,76 +30,7 @@ The `freqtrade plot-dataframe` subcommand shows an interactive graph with three
 
 Possible arguments:
 
-```
-usage: freqtrade plot-dataframe [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                [-d PATH] [--userdir PATH] [-s NAME]
-                                [--strategy-path PATH] [-p PAIRS [PAIRS ...]]
-                                [--indicators1 INDICATORS1 [INDICATORS1 ...]]
-                                [--indicators2 INDICATORS2 [INDICATORS2 ...]]
-                                [--plot-limit INT] [--db-url PATH]
-                                [--trade-source {DB,file}] [--export EXPORT]
-                                [--export-filename PATH]
-                                [--timerange TIMERANGE] [-i TIMEFRAME]
-                                [--no-trades]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  --indicators1 INDICATORS1 [INDICATORS1 ...]
-                        Set indicators from your strategy you want in the
-                        first row of the graph. Space-separated list. Example:
-                        `ema3 ema5`. Default: `['sma', 'ema3', 'ema5']`.
-  --indicators2 INDICATORS2 [INDICATORS2 ...]
-                        Set indicators from your strategy you want in the
-                        third row of the graph. Space-separated list. Example:
-                        `fastd fastk`. Default: `['macd', 'macdsignal']`.
-  --plot-limit INT      Specify tick limit for plotting. Notice: too high
-                        values cause huge files. Default: 750.
-  --db-url PATH         Override trades database URL, this is useful in custom
-                        deployments (default: `sqlite:///tradesv3.sqlite` for
-                        Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
-                        Dry Run).
-  --trade-source {DB,file}
-                        Specify the source for trades (Can be DB or file
-                        (backtest file)) Default: file
-  --export EXPORT       Export backtest results, argument are: trades.
-                        Example: `--export=trades`
-  --export-filename PATH
-                        Save backtest results to the file with this filename.
-                        Requires `--export` to be set as well. Example:
-                        `--export-filename=user_data/backtest_results/backtest
-                        _today.json`
-  --timerange TIMERANGE
-                        Specify what timerange of data to use.
-  -i TIMEFRAME, --timeframe TIMEFRAME
-                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
-  --no-trades           Skip using trades from backtesting file and DB.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-Strategy arguments:
-  -s NAME, --strategy NAME
-                        Specify strategy class name which will be used by the
-                        bot.
-  --strategy-path PATH  Specify additional strategy lookup path.
-
-```
+--8<-- "commands/plot-dataframe.md"
 
 Example:
 
@@ -306,62 +237,7 @@ The forth graph can help you analyze trade parallelism, showing how often max_op
 
 Possible options for the `freqtrade plot-profit` subcommand:
 
-```
-usage: freqtrade plot-profit [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                             [-d PATH] [--userdir PATH] [-s NAME]
-                             [--strategy-path PATH] [-p PAIRS [PAIRS ...]]
-                             [--timerange TIMERANGE] [--export EXPORT]
-                             [--export-filename PATH] [--db-url PATH]
-                             [--trade-source {DB,file}] [-i TIMEFRAME]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  -p PAIRS [PAIRS ...], --pairs PAIRS [PAIRS ...]
-                        Limit command to these pairs. Pairs are space-
-                        separated.
-  --timerange TIMERANGE
-                        Specify what timerange of data to use.
-  --export EXPORT       Export backtest results, argument are: trades.
-                        Example: `--export=trades`
-  --export-filename PATH, --backtest-filename PATH
-                        Use backtest results from this filename.
-                        Requires `--export` to be set as well. Example:
-                        `--export-filename=user_data/backtest_results/backtest
-                        _today.json`
-  --db-url PATH         Override trades database URL, this is useful in custom
-                        deployments (default: `sqlite:///tradesv3.sqlite` for
-                        Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
-                        Dry Run).
-  --trade-source {DB,file}
-                        Specify the source for trades (Can be DB or file
-                        (backtest file)) Default: file
-  -i TIMEFRAME, --timeframe TIMEFRAME
-                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
-  --auto-open           Automatically open generated plot.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-Strategy arguments:
-  -s NAME, --strategy NAME
-                        Specify strategy class name which will be used by the
-                        bot.
-  --strategy-path PATH  Specify additional strategy lookup path.
-
-```
+--8<-- "commands/plot-profit.md"
 
 The `-p/--pairs`  argument, can be used to limit the pairs that are considered for this calculation.
 

docs/recursive-analysis.md

@@ -26,56 +26,7 @@ In addition to the recursive formula check, this command also carries out a simp
 
 ## Recursive-analysis command reference
 
-```
-usage: freqtrade recursive-analysis [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                    [-d PATH] [--userdir PATH] [-s NAME]
-                                    [--strategy-path PATH]
-                                    [--recursive-strategy-search]
-                                    [--freqaimodel NAME]
-                                    [--freqaimodel-path PATH] [-i TIMEFRAME]
-                                    [--timerange TIMERANGE]
-                                    [--data-format-ohlcv {json,jsongz,hdf5,feather,parquet}]
-                                    [-p PAIR]
-                                    [--freqai-backtest-live-models]
-                                    [--startup-candle STARTUP_CANDLES [STARTUP_CANDLES ...]]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  -i TIMEFRAME, --timeframe TIMEFRAME
-                        Specify timeframe (`1m`, `5m`, `30m`, `1h`, `1d`).
-  --data-format-ohlcv {json,jsongz,hdf5,feather,parquet}
-                        Storage format for downloaded candle (OHLCV) data.
-                        (default: `feather`).
-  -p PAIR, --pairs PAIR
-                        Limit command to this pair.
-  --startup-candle STARTUP_CANDLE [STARTUP_CANDLE ...]
-                        Provide a space-separated list of startup_candle_count to
-                        be checked. Default : `199 399 499 999 1999`.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-Strategy arguments:
-  -s NAME, --strategy NAME
-                        Specify strategy class name which will be used by the
-                        bot.
-  --strategy-path PATH  Specify additional strategy lookup path.
-  --timerange TIMERANGE
-                        Specify what timerange of data to use.
-```
+--8<-- "commands/recursive-analysis.md"
 
 ### Why are odd-numbered default startup candles used?
 

docs/requirements-docs.txt

@@ -1,7 +1,7 @@
 markdown==3.7
 mkdocs==1.6.1
-mkdocs-material==9.5.45
+mkdocs-material==9.5.50
 mdx_truly_sane_lists==1.3
-pymdown-extensions==10.12
-jinja2==3.1.4
+pymdown-extensions==10.14.1
+jinja2==3.1.5
 mike==2.1.3

docs/rest-api.md

@@ -88,8 +88,9 @@ Make sure that the following 2 lines are available in your docker-compose file:
 
 ### Consuming the API
 
-You can consume the API by using `freqtrade-client` (also available as `scripts/rest_client.py`).
-This command can be installed independent of the bot by using `pip install freqtrade-client`.
+We advise consuming the API by using the supported `freqtrade-client` package (also available as `scripts/rest_client.py`).
+
+This command can be installed independent of any running freqtrade bot by using `pip install freqtrade-client`.
 
 This module is designed to be lightweight, and only depends on the `requests` and `python-rapidjson` modules, skipping all heavy dependencies freqtrade otherwise needs.
 
@@ -144,57 +145,6 @@ This method will work for all arguments - check the "show" command for a list of
 
     For a full list of available commands, please refer to the list below.
 
-### Available endpoints
-
-|  Command | Description |
-|----------|-------------|
-| `ping` | Simple command testing the API Readiness - requires no authentication.
-| `start` | Starts the trader.
-| `stop` | Stops the trader.
-| `stopbuy` | Stops the trader from opening new trades. Gracefully closes open trades according to their rules.
-| `reload_config` | Reloads the configuration file.
-| `trades` | List last trades. Limited to 500 trades per call.
-| `trade/<tradeid>` | Get specific trade.
-| `trades/<tradeid>` | DELETE - Remove trade from the database. Tries to close open orders. Requires manual handling of this trade on the exchange.
-| `trades/<tradeid>/open-order` | DELETE - Cancel open order for this trade.
-| `trades/<tradeid>/reload` | GET - Reload a trade from the Exchange. Only works in live, and can potentially help recover a trade that was manually sold on the exchange.
-| `show_config` | Shows part of the current configuration with relevant settings to operation.
-| `logs` | Shows last log messages.
-| `status` | Lists all open trades.
-| `count` | Displays number of trades used and available.
-| `entries [pair]` | Shows profit statistics for each enter tags for given pair (or all pairs if pair isn't given). Pair is optional.
-| `exits [pair]` | Shows profit statistics for each exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.
-| `mix_tags [pair]` | Shows profit statistics for each combinations of enter tag + exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.
-| `locks` | Displays currently locked pairs.
-| `delete_lock <lock_id>` | Deletes (disables) the lock by id.
-| `locks add <pair>, <until>, [side], [reason]` | Locks a pair until "until". (Until will be rounded up to the nearest timeframe).
-| `profit` | Display a summary of your profit/loss from close trades and some stats about your performance.
-| `forceexit <trade_id> [order_type] [amount]` | Instantly exits the given trade (ignoring `minimum_roi`), using the given order type ("market" or "limit", uses your config setting if not specified), and the chosen amount (full sell if not specified).
-| `forceexit all` | Instantly exits all open trades (Ignoring `minimum_roi`).
-| `forceenter <pair> [rate]` | Instantly enters the given pair. Rate is optional. (`force_entry_enable` must be set to True)
-| `forceenter <pair> <side> [rate]` | Instantly longs or shorts the given pair. Rate is optional. (`force_entry_enable` must be set to True)
-| `performance` | Show performance of each finished trade grouped by pair.
-| `balance` | Show account balance per currency.
-| `daily <n>` | Shows profit or loss per day, over the last n days (n defaults to 7).
-| `weekly <n>` | Shows profit or loss per week, over the last n days (n defaults to 4).
-| `monthly <n>` | Shows profit or loss per month, over the last n days (n defaults to 3).
-| `stats` | Display a summary of profit / loss reasons as well as average holding times.
-| `whitelist` | Show the current whitelist.
-| `blacklist [pair]` | Show the current blacklist, or adds a pair to the blacklist.
-| `edge` | Show validated pairs by Edge if it is enabled.
-| `pair_candles` | Returns dataframe for a pair / timeframe combination while the bot is running. **Alpha**
-| `pair_history` | Returns an analyzed dataframe for a given timerange, analyzed by a given strategy. **Alpha**
-| `plot_config` | Get plot config from the strategy (or nothing if not configured). **Alpha**
-| `strategies` | List strategies in strategy directory. **Alpha**
-| `strategy <strategy>` | Get specific Strategy content. **Alpha**
-| `available_pairs` | List available backtest data. **Alpha**
-| `version` | Show version.
-| `sysinfo` | Show information about the system load.
-| `health` | Show bot health (last bot loop).
-
-!!! Warning "Alpha status"
-    Endpoints labeled with *Alpha status* above may change at any time without notice.
-
 Possible commands can be listed from the rest-client script using the `help` command.
 
 ``` bash
@@ -266,6 +216,14 @@ forceexit
 health
 	Provides a quick health check of the running bot.
 
+lock_add
+    Manually lock a specific pair
+
+        :param pair: Pair to lock
+        :param until: Lock until this date (format "2024-03-30 16:00:00Z")
+        :param side: Side to lock (long, short, *)
+        :param reason: Reason for the lock        
+
 locks
 	Return current locks
 
@@ -353,6 +311,62 @@ whitelist
 
 ```
 
+### Available endpoints
+
+If you wish to call the REST API manually via another route, e.g. directly via `curl`, the table below shows the relevant URL endpoints and parameters.
+All endpoints in the below table need to be prefixed with the base URL of the API, e.g. `http://127.0.0.1:8080/api/v1/` - so the command becomes `http://127.0.0.1:8080/api/v1/<command>`.
+
+|  Endpoint | Method | Description / Parameters |
+|-----------|--------|--------------------------|
+| `/ping` | GET | Simple command testing the API Readiness - requires no authentication.
+| `/start` | POST | Starts the trader.
+| `/stop` | POST | Stops the trader.
+| `/stopbuy` | POST | Stops the trader from opening new trades. Gracefully closes open trades according to their rules.
+| `/reload_config` | POST | Reloads the configuration file.
+| `/trades` | GET | List last trades. Limited to 500 trades per call.
+| `/trade/<tradeid>` | GET | Get specific trade.<br/>*Params:*<br/>- `tradeid` (`int`)
+| `/trades/<tradeid>` | DELETE | Remove trade from the database. Tries to close open orders. Requires manual handling of this trade on the exchange.<br/>*Params:*<br/>- `tradeid` (`int`) 
+| `/trades/<tradeid>/open-order` | DELETE | Cancel open order for this trade.<br/>*Params:*<br/>- `tradeid` (`int`) 
+| `/trades/<tradeid>/reload` | POST | Reload a trade from the Exchange. Only works in live, and can potentially help recover a trade that was manually sold on the exchange.<br/>*Params:*<br/>- `tradeid` (`int`) 
+| `/show_config` | GET | Shows part of the current configuration with relevant settings to operation.
+| `/logs` | GET | Shows last log messages.
+| `/status` | GET | Lists all open trades.
+| `/count` | GET | Displays number of trades used and available.
+| `/entries` | GET | Shows profit statistics for each enter tags for given pair (or all pairs if pair isn't given). Pair is optional.<br/>*Params:*<br/>- `pair` (`str`) 
+| `/exits` | GET | Shows profit statistics for each exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.<br/>*Params:*<br/>- `pair` (`str`) 
+| `/mix_tags` | GET | Shows profit statistics for each combinations of enter tag + exit reasons for given pair (or all pairs if pair isn't given). Pair is optional.<br/>*Params:*<br/>- `pair` (`str`) 
+| `/locks` | GET | Displays currently locked pairs.
+| `/locks` | POST | Locks a pair until "until". (Until will be rounded up to the nearest timeframe). Side is optional and is either `long` or `short` (default is `long`). Reason is optional.<br/>*Params:*<br/>- `<pair>` (`str`)<br/>- `<until>` (`datetime`)<br/>- `[side]` (`str`)<br/>- `[reason]` (`str`) 
+| `/locks/<lockid>` | DELETE | Deletes (disables) the lock by id.<br/>*Params:*<br/>- `lockid` (`int`) 
+| `/profit` | GET | Display a summary of your profit/loss from close trades and some stats about your performance.
+| `/forceexit` | POST | Instantly exits the given trade (ignoring `minimum_roi`), using the given order type ("market" or "limit", uses your config setting if not specified), and the chosen amount (full sell if not specified). If `all` is supplied as the `tradeid`, then all currently open trades will be forced to exit.<br/>*Params:*<br/>- `<tradeid>` (`int` or `str`)<br/>- `<ordertype>` (`str`)<br/>- `[amount]` (`float`)
+| `/forceenter` | POST | Instantly enters the given pair. Side is optional and is either `long` or `short` (default is `long`). Rate is optional. (`force_entry_enable` must be set to True)<br/>*Params:*<br/>- `<pair>` (`str`)<br/>- `<side>` (`str`)<br/>- `[rate]` (`float`)
+| `/performance` | GET | Show performance of each finished trade grouped by pair.
+| `/balance` | GET | Show account balance per currency.
+| `/daily` | GET | Shows profit or loss per day, over the last n days (n defaults to 7).<br/>*Params:*<br/>- `<n>` (`int`)
+| `/weekly` | GET | Shows profit or loss per week, over the last n days (n defaults to 4).<br/>*Params:*<br/>- `<n>` (`int`)
+| `/monthly` | GET | Shows profit or loss per month, over the last n days (n defaults to 3).<br/>*Params:*<br/>- `<n>` (`int`)
+| `/stats` | GET | Display a summary of profit / loss reasons as well as average holding times.
+| `/whitelist` | GET | Show the current whitelist.
+| `/blacklist` | GET | Show the current blacklist.
+| `/blacklist` | POST | Adds the specified pair to the blacklist.<br/>*Params:*<br/>- `pair` (`str`)
+| `/blacklist` | DELETE | Deletes the specified list of pairs from the blacklist.<br/>*Params:*<br/>- `[pair,pair]` (`list[str]`) 
+| `/edge` | GET | Show validated pairs by Edge if it is enabled.
+| `/pair_candles` | GET | Returns dataframe for a pair / timeframe combination while the bot is running. **Alpha**
+| `/pair_candles` | POST | Returns dataframe for a pair / timeframe combination while the bot is running, filtered by a provided list of columns to return. **Alpha**<br/>*Params:*<br/>- `<column_list>` (`list[str]`)
+| `/pair_history` | GET | Returns an analyzed dataframe for a given timerange, analyzed by a given strategy. **Alpha**
+| `/pair_history` | POST | Returns an analyzed dataframe for a given timerange, analyzed by a given strategy, filtered by a provided list of columns to return. **Alpha**<br/>*Params:*<br/>- `<column_list>` (`list[str]`)
+| `/plot_config` | GET | Get plot config from the strategy (or nothing if not configured). **Alpha**
+| `/strategies` | GET | List strategies in strategy directory. **Alpha**
+| `/strategy/<strategy>` | GET | Get specific Strategy content by strategy class name. **Alpha**<br/>*Params:*<br/>- `<strategy>` (`str`)
+| `/available_pairs` | GET | List available backtest data. **Alpha**
+| `/version` | GET | Show version.
+| `/sysinfo` | GET | Show information about the system load.
+| `/health` | GET | Show bot health (last bot loop).
+
+!!! Warning "Alpha status"
+    Endpoints labeled with *Alpha status* above may change at any time without notice.
+
 ### Message WebSocket
 
 The API Server includes a websocket endpoint for subscribing to RPC messages from the freqtrade Bot.

docs/stoploss.md

@@ -30,8 +30,8 @@ The Order-type will be ignored if only one mode is available.
 |----------|-------------|
 | Binance  | limit |
 | Binance Futures  | market, limit |
-| Bingx  | market, limit |
-| HTX (former Huobi)    | limit |
+| Bingx    | market, limit |
+| HTX      | limit |
 | kraken   | market, limit |
 | Gate     | limit |
 | Okx      | limit |

docs/strategy-callbacks.md

@@ -758,7 +758,7 @@ For performance reasons, it's disabled by default and freqtrade will show a warn
 
 Additional orders also result in additional fees and those orders don't count towards `max_open_trades`.
 
-This callback is **not** called when there is an open order (either buy or sell) waiting for execution.
+This callback is also called when there is an open order (either buy or sell) waiting for execution - and will cancel the existing open order to place a new order if the amount, price or direction is different.
 
 `adjust_trade_position()` is called very frequently for the duration of a trade, so you must keep your implementation as performant as possible.
 
@@ -767,6 +767,22 @@ Adjustment orders can be assigned with a tag by returning a 2 element Tuple, wit
 
 Modifications to leverage are not possible, and the stake-amount returned is assumed to be before applying leverage.
 
+The combined stake currently allocated to the position is held in `trade.stake_amount`. Therefore `trade.stake_amount` will always be updated on every additional entry and partial exit made through `adjust_trade_position()`.
+
+!!! Danger "Loose Logic"
+    On dry and live run, this function will be called every `throttle_process_secs` (default to 5s). If you have a loose logic, for example your logic for extra entry is only to check RSI of last candle is below 30, then when such condition fulfilled, your bot will do extra re-entry every 5 secs until either it run out of money, it hit the `max_position_adjustment` limit, or a new candle with RSI more than 30 arrived.
+
+    Same thing also can happen with partial exit. So be sure to have a strict logic and/or check for the last filled order.
+
+!!! Warning "Performance with many position adjustments"
+    Position adjustments can be a good approach to increase a strategy's output - but it can also have drawbacks if using this feature extensively.  
+    Each of the orders will be attached to the trade object for the duration of the trade - hence increasing memory usage.
+    Trades with long duration and 10s or even 100ds of position adjustments are therefore not recommended, and should be closed at regular intervals to not affect performance.
+
+!!! Warning "Backtesting"
+    During backtesting this callback is called for each candle in `timeframe` or `timeframe_detail`, so run-time performance will be affected.
+    This can also cause deviating results between live and backtesting, since backtesting can adjust the trade only once per candle, whereas live could adjust the trade multiple times per candle.
+
 ### Increase position
 
 The strategy is expected to return a positive **stake_amount** (in stake currency) between `min_stake` and `max_stake` if and when an additional entry order should be made (position is increased -> buy order for long trades, sell order for short trades).
@@ -776,16 +792,22 @@ If there are not enough funds in the wallet (the return value is above `max_stak
 
 Additional entries are ignored once you have reached the maximum amount of extra entries that you have set on `max_entry_position_adjustment`, but the callback is called anyway looking for partial exits.
 
+!!! Note "About stake size"
+    Using fixed stake size means it will be the amount used for the first order, just like without position adjustment.
+    If you wish to buy additional orders with DCA, then make sure to leave enough funds in the wallet for that.
+    Using `"unlimited"` stake amount with DCA orders requires you to also implement the `custom_stake_amount()` callback to avoid allocating all funds to the initial order.
+
 ### Decrease position
 
 The strategy is expected to return a negative stake_amount (in stake currency) for a partial exit.
 Returning the full owned stake at that point (`-trade.stake_amount`) results in a full exit.  
 Returning a value more than the above (so remaining stake_amount would become negative) will result in the bot ignoring the signal.
 
-!!! Note "About stake size"
-    Using fixed stake size means it will be the amount used for the first order, just like without position adjustment.
-    If you wish to buy additional orders with DCA, then make sure to leave enough funds in the wallet for that.
-    Using `"unlimited"` stake amount with DCA orders requires you to also implement the `custom_stake_amount()` callback to avoid allocating all funds to the initial order.
+For a partial exit, it's important to know that the formula used to calculate the amount of the coin for the partial exit order is `amount to be exited partially = negative_stake_amount * trade.amount / trade.stake_amount`, where `negative_stake_amount` is the value returned from the `adjust_trade_position` function. As seen in the formula, the formula doesn't care about current profit/loss of the position. It only cares about `trade.amount` and `trade.stake_amount` which aren't affected by the price movement at all.
+
+For example, let's say you buy 2 SHITCOIN/USDT at open rate of 50, which means the trade's stake amount is 100 USDT. Now the price raises to 200 and you want to sell half of it. In that case, you have to return -50% of `trade.stake_amount` (0.5 * 100 USDT) which equals to -50. The bot will calculate the amount it needed to sell, which is `50 * 2 / 100` which equals 1 SHITCOIN/USDT. If you return -200 (50% of 2 * 200), the bot will ignore it since `trade.stake_amount` is only 100 USDT but you asked to sell 200 USDT which means you are asking to sell 4 SHITCOIN/USDT.
+
+Back to the example above, since current rate is 200, the current USDT value of your trade is now 400 USDT. Let's say you want to partially sell 100 USDT to take out the initial investment and leave the profit in the trade hoping that the price keeps rising. In that case, you have to do a different approach. First, you need to calculate the exact amount you needed to sell. In this case, since you want to sell 100 USDT worth based of current rate, the exact amount you need to partially sell is `100 * 2 / 400` which equals 0.5 SHITCOIN/USDT. Since we know now the exact amount we want to sell (0.5), the value you need to return in the `adjust_trade_position` function is `-amount to be exited partially * trade.stake_amount / trade.amount`, which equals -25. The bot will sell 0.5 SHITCOIN/USDT, keeping 1.5 in trade. You will receive 100 USDT from the partial exit.
 
 !!! Warning "Stoploss calculation"
     Stoploss is still calculated from the initial opening price, not averaged price.
@@ -793,15 +815,6 @@ Returning a value more than the above (so remaining stake_amount would become ne
 
     While `/stopentry` command stops the bot from entering new trades, the position adjustment feature will continue buying new orders on existing trades.
 
-!!! Warning "Backtesting"
-    During backtesting this callback is called for each candle in `timeframe` or `timeframe_detail`, so run-time performance will be affected.
-    This can also cause deviating results between live and backtesting, since backtesting can adjust the trade only once per candle, whereas live could adjust the trade multiple times per candle.
-
-!!! Warning "Performance with many position adjustments"
-    Position adjustments can be a good approach to increase a strategy's output - but it can also have drawbacks if using this feature extensively.  
-    Each of the orders will be attached to the trade object for the duration of the trade - hence increasing memory usage.
-    Trades with long duration and 10s or even 100ds of position adjustments are therefore not recommended, and should be closed at regular intervals to not affect performance.
-
 ``` python
 # Default imports
 
@@ -923,7 +936,10 @@ class DigDeeperStrategy(IStrategy):
 
 ## Adjust Entry Price
 
-The `adjust_entry_price()` callback may be used by strategy developer to refresh/replace limit orders upon arrival of new candles.
+The `adjust_entry_price()` callback may be used by strategy developer to refresh/replace limit orders upon arrival of new candles.  
+This callback is called once every iteration unless the order has been (re)placed within the current candle - limiting the maximum (re)placement of each order to once per candle.
+This also means that the first call will be at the start of the next candle after the initial order was placed.
+
 Be aware that `custom_entry_price()` is still the one dictating initial entry limit order price target at the time of entry trigger.
 
 Orders can be cancelled out of this callback by returning `None`.
@@ -934,7 +950,8 @@ Returning any other price will cancel the existing order, and replace it with a
 The trade open-date (`trade.open_date_utc`) will remain at the time of the very first order placed.
 Please make sure to be aware of this - and eventually adjust your logic in other callbacks to account for this, and use the date of the first filled order instead.
 
-If the cancellation of the original order fails, then the order will not be replaced - though the order will most likely have been canceled on exchange. Having this happen on initial entries will result in the deletion of the order, while on position adjustment orders, it'll result in the trade size remaining as is.
+If the cancellation of the original order fails, then the order will not be replaced - though the order will most likely have been canceled on exchange. Having this happen on initial entries will result in the deletion of the order, while on position adjustment orders, it'll result in the trade size remaining as is.  
+If the order has been partially filled, the order will not be replaced. You can however use [`adjust_trade_position()`](#adjust-trade-position) to adjust the trade size to the full, expected position size, should this be necessary / desired.
 
 !!! Warning "Regular timeout"
     Entry `unfilledtimeout` mechanism (as well as `check_entry_timeout()`) takes precedence over this.

docs/strategy-customization.md

@@ -545,7 +545,7 @@ def informative_pairs(self):
             ]
 ```
 
-A full sample can be found [in the DataProvider section](#complete-data-provider-sample).
+A full sample can be found [in the DataProvider section](#complete-dataprovider-sample).
 
 !!! Warning
     As these pairs will be refreshed as part of the regular whitelist refresh, it's best to keep this list short.
@@ -576,7 +576,7 @@ To easily define informative pairs, use the `@informative` decorator. All decora
 and do not have access to data from other informative pairs. However, all informative dataframes for each pair are merged and passed to main `populate_indicators()` method.
 
 !!! Note
-    Do not use the `@informative` decorator if you need to use data from one informative pair when generating another informative pair. Instead, define informative pairs manually as described [in the DataProvider section](#complete-data-provider-sample).
+    Do not use the `@informative` decorator if you need to use data from one informative pair when generating another informative pair. Instead, define informative pairs manually as described [in the DataProvider section](#complete-dataprovider-sample).
 
 When hyperopting, use of the hyperoptable parameter `.value` attribute is not supported. Please use the `.range` attribute. See [optimizing an indicator parameter](hyperopt.md#optimizing-an-indicator-parameter) for more information.
 
@@ -710,7 +710,7 @@ Options:
 - Merge the dataframe without lookahead bias
 - Forward-fill (optional)
 
-For a full sample, please refer to the [complete data provider example](#complete-data-provider-sample) below.
+For a full sample, please refer to the [complete data provider example](#complete-dataprovider-sample) below.
 
 All columns of the informative dataframe will be available on the returning dataframe in a renamed fashion:
 

docs/strategy_analysis_example.md

@@ -152,7 +152,7 @@ print(stats["strategy"][strategy]["pairlist"])
 # Get market change (average change of all pairs from start to end of the backtest period)
 print(stats["strategy"][strategy]["market_change"])
 # Maximum drawdown ()
-print(stats["strategy"][strategy]["max_drawdown"])
+print(stats["strategy"][strategy]["max_drawdown_abs"])
 # Maximum drawdown start and end
 print(stats["strategy"][strategy]["drawdown_start"])
 print(stats["strategy"][strategy]["drawdown_end"])

docs/stylesheets/ft.extra.css

@@ -15,3 +15,7 @@
 .md-version__list {
     font-weight: 500 !important;
 }
+
+#available-endpoints ~ .md-typeset__scrollwrap .md-typeset__table th:first-of-type {
+    width: 35% !important;
+}

docs/telegram-usage.md

@@ -45,15 +45,22 @@ Get your "Id", you will use it for the config parameter `chat_id`.
 
 #### Use Group id
 
-You can use bots in telegram groups by just adding them to the group. You can find the group id by first adding a [RawDataBot](https://telegram.me/rawdatabot) to your group. The Group id is shown as id in the `"chat"` section, which the RawDataBot will send to you:
+To get the group ID, you can add the bot to the group, start freqtrade, and issue a `/tg_info` command.
+This will return the group id to you, without having to use some random bot.
+While "chat_id" is still required, it doesn't need to be set to this particular group id for this command.
+
+The response will also contain the "topic_id" if necessary - both in a format ready to copy/paste into your configuration.
 
 ``` json
-"chat":{
-   "id":-1001332619709
+ {
+    "enabled": true,
+    "token": "********",
+    "chat_id": "-1001332619709",
+    "topic_id": "122"
 }
 ```
 
-For the Freqtrade configuration, you can then use the full value (including `-` if it's there) as string:
+For the Freqtrade configuration, you can then use the full value (including `-` ) as string:
 
 ```json
    "chat_id": "-1001332619709"
@@ -62,6 +69,18 @@ For the Freqtrade configuration, you can then use the full value (including `-`
 !!! Warning "Using telegram groups"
     When using telegram groups, you're giving every member of the telegram group access to your freqtrade bot and to all commands possible via telegram. Please make sure that you can trust everyone in the telegram group to avoid unpleasant surprises.
 
+##### Group Topic ID
+
+To use a specific topic in a group, you can use the `topic_id` parameter in the configuration. This will allow you to use the bot in a specific topic in a group.  
+Without this, the bot will always respond to the general channel in the group if topics are enabled for a group chat.
+
+```json
+   "chat_id": "-1001332619709",
+   "topic_id": "3"
+```
+
+Similar to the group-id - you can use `/tg_info` from the topic/thread to get the correct topic-id.
+
 ## Control telegram noise
 
 Freqtrade provides means to control the verbosity of your telegram bot.
@@ -341,6 +360,8 @@ Return the performance of each crypto-currency the bot has sold.
 > 5. `STORJ/BTC 0.0009 BTC (27.24%) (1)`  
 > ...  
 
+The relative performance is calculated against the total investment in the currency, aggregating all filled entries for the currency.
+
 ### /balance
 
 Return the balance of all crypto-currency your have on the exchange.

docs/utils.md

@@ -6,17 +6,9 @@ Besides the Live-Trade and Dry-Run run modes, the `backtesting`, `edge` and `hyp
 
 Creates the directory structure to hold your files for freqtrade.
 Will also create strategy and hyperopt examples for you to get started.
-Can be used multiple times - using `--reset` will reset the sample strategy and hyperopt files to their default state. 
+Can be used multiple times - using `--reset` will reset the sample strategy and hyperopt files to their default state.
 
-```
-usage: freqtrade create-userdir [-h] [--userdir PATH] [--reset]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-  --reset               Reset sample files to their original state.
-```
+--8<-- "commands/create-userdir.md"
 
 !!! Warning
     Using `--reset` may result in loss of data, since this will overwrite all sample files without asking again.
@@ -38,15 +30,7 @@ optional arguments:
 
 Creates a new configuration file, asking some questions which are important selections for a configuration.
 
-```
-usage: freqtrade new-config [-h] [-c PATH]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default: `config.json`). Multiple --config options may be used. Can be set to `-`
-                        to read config from stdin.
-```
+--8<-- "commands/new-config.md"
 
 !!! Warning
     Only vital questions are asked. Freqtrade offers a lot more configuration possibilities, which are listed in the [Configuration documentation](configuration.md#configuration-parameters)
@@ -73,21 +57,7 @@ Especially useful with [split configuration files](configuration.md#multiple-con
 
 ![Show config output](assets/show-config-output.png)
 
-```
-usage: freqtrade show-config [-h] [--userdir PATH] [-c PATH]
-                             [--show-sensitive]
-
-options:
-  -h, --help            show this help message and exit
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  --show-sensitive      Show secrets in the output.
-```
+--8<-- "commands/show-config.md"
 
 ``` output
 Your combined configuration is:
@@ -120,23 +90,7 @@ The file will be named inline with your class name, and will not overwrite exist
 
 Results will be located in `user_data/strategies/<strategyclassname>.py`.
 
-``` output
-usage: freqtrade new-strategy [-h] [--userdir PATH] [-s NAME]
-                              [--template {full,minimal,advanced}]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-  -s NAME, --strategy NAME
-                        Specify strategy class name which will be used by the
-                        bot.
-  --template {full,minimal,advanced}
-                        Use a template which is either `minimal`, `full`
-                        (containing multiple sample indicators) or `advanced`.
-                        Default: `full`.
-
-```
+--8<-- "commands/new-strategy.md"
 
 ### Sample usage of new-strategy
 
@@ -162,38 +116,7 @@ Use the `list-strategies` subcommand to see all strategies in one particular dir
 
 This subcommand is useful for finding problems in your environment with loading strategies: modules with strategies that contain errors and failed to load are printed in red (LOAD FAILED), while strategies with duplicate names are printed in yellow (DUPLICATE NAME).
 
-```
-usage: freqtrade list-strategies [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                 [-d PATH] [--userdir PATH]
-                                 [--strategy-path PATH] [-1] [--no-color]
-                                 [--recursive-strategy-search]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --strategy-path PATH  Specify additional strategy lookup path.
-  -1, --one-column      Print output in one column.
-  --no-color            Disable colorization of hyperopt results. May be
-                        useful if you are redirecting output to a file.
-  --recursive-strategy-search
-                        Recursively search for a strategy in the strategies
-                        folder.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-```
+--8<-- "commands/list-strategies.md"
 
 !!! Warning
     Using these commands will try to load all python files from a directory. This can be a security risk if untrusted files reside in this directory, since all module-level code is executed.
@@ -224,36 +147,7 @@ It provides a quick list of all available loss functions in your environment.
 
 This subcommand can be useful for finding problems in your environment with loading loss functions: modules with Hyperopt-Loss functions that contain errors and failed to load are printed in red (LOAD FAILED), while hyperopt-Loss functions with duplicate names are printed in yellow (DUPLICATE NAME).
 
-```
-usage: freqtrade list-hyperoptloss [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                   [-d PATH] [--userdir PATH]
-                                   [--hyperopt-path PATH] [-1] [--no-color]
-
-options:
-  -h, --help            show this help message and exit
-  --hyperopt-path PATH  Specify additional lookup path for Hyperopt Loss
-                        functions.
-  -1, --one-column      Print output in one column.
-  --no-color            Disable colorization of hyperopt results. May be
-                        useful if you are redirecting output to a file.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-```
+--8<-- "commands/list-hyperoptloss.md"
 
 ## List freqAI models
 
@@ -261,49 +155,13 @@ Use the `list-freqaimodels` subcommand to see all freqAI models available.
 
 This subcommand is useful for finding problems in your environment with loading freqAI models: modules with models that contain errors and failed to load are printed in red (LOAD FAILED), while models with duplicate names are printed in yellow (DUPLICATE NAME).
 
-```
-usage: freqtrade list-freqaimodels [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                   [-d PATH] [--userdir PATH]
-                                   [--freqaimodel-path PATH] [-1] [--no-color]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --freqaimodel-path PATH
-                        Specify additional lookup path for freqaimodels.
-  -1, --one-column      Print output in one column.
-  --no-color            Disable colorization of hyperopt results. May be
-                        useful if you are redirecting output to a file.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/list-freqaimodels.md"
 
 ## List Exchanges
 
 Use the `list-exchanges` subcommand to see the exchanges available for the bot.
 
-```
-usage: freqtrade list-exchanges [-h] [-1] [-a]
-
-optional arguments:
-  -h, --help        show this help message and exit
-  -1, --one-column  Print output in one column.
-  -a, --all         Print all exchanges known to the ccxt library.
-```
+--8<-- "commands/list-exchanges.md"
 
 Example: see exchanges available for the bot:
 
@@ -352,35 +210,7 @@ okx                 True     Official     spot, isolated futures
 
 Use the `list-timeframes` subcommand to see the list of timeframes available for the exchange.
 
-```
-usage: freqtrade list-timeframes [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                 [-d PATH] [--userdir PATH]
-                                 [--exchange EXCHANGE] [-1]
-
-options:
-  -h, --help            show this help message and exit
-  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
-  -1, --one-column      Print output in one column.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-
-```
+--8<-- "commands/list-timeframes.md"
 
 * Example: see the timeframes for the 'binance' exchange, set in the configuration file:
 
@@ -408,54 +238,7 @@ You can print info about any pair/market with these subcommands - and you can fi
 
 These subcommands have same usage and same set of available options:
 
-```
-usage: freqtrade list-markets [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                              [-d PATH] [--userdir PATH] [--exchange EXCHANGE]
-                              [--print-list] [--print-json] [-1] [--print-csv]
-                              [--base BASE_CURRENCY [BASE_CURRENCY ...]]
-                              [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]]
-                              [-a] [--trading-mode {spot,margin,futures}]
-usage: freqtrade list-pairs [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                            [-d PATH] [--userdir PATH] [--exchange EXCHANGE]
-                            [--print-list] [--print-json] [-1] [--print-csv]
-                            [--base BASE_CURRENCY [BASE_CURRENCY ...]]
-                            [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]] [-a]
-                            [--trading-mode {spot,margin,futures}]
-options:
-  -h, --help            show this help message and exit
-  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
-  --print-list          Print list of pairs or market symbols. By default data
-                        is printed in the tabular format.
-  --print-json          Print list of pairs or market symbols in JSON format.
-  -1, --one-column      Print output in one column.
-  --print-csv           Print exchange pair or market data in the csv format.
-  --base BASE_CURRENCY [BASE_CURRENCY ...]
-                        Specify base currency(-ies). Space-separated list.
-  --quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]
-                        Specify quote currency(-ies). Space-separated list.
-  -a, --all             Print all pairs or market symbols. By default only
-                        active ones are shown.
-  --trading-mode {spot,margin,futures}, --tradingmode {spot,margin,futures}
-                        Select Trading mode
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/list-pairs.md"
 
 By default, only active pairs/markets are shown. Active pairs/markets are those that can currently be traded on the exchange.
 You can use the `-a`/`-all` option to see the list of all pairs/markets, including the inactive ones.
@@ -493,28 +276,7 @@ Use the `test-pairlist` subcommand to test the configuration of [dynamic pairlis
 Requires a configuration with specified `pairlists` attribute.
 Can be used to generate static pairlists to be used during backtesting / hyperopt.
 
-```
-usage: freqtrade test-pairlist [-h] [--userdir PATH] [-v] [-c PATH]
-                               [--quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]]
-                               [-1] [--print-json] [--exchange EXCHANGE]
-
-options:
-  -h, --help            show this help message and exit
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  --quote QUOTE_CURRENCY [QUOTE_CURRENCY ...]
-                        Specify quote currency(-ies). Space-separated list.
-  -1, --one-column      Print output in one column.
-  --print-json          Print list of pairs or market symbols in JSON format.
-  --exchange EXCHANGE   Exchange name. Only valid if no config is provided.
-
-```
+--8<-- "commands/test-pairlist.md"
 
 ### Examples
 
@@ -530,17 +292,7 @@ freqtrade test-pairlist --config config.json --quote USDT BTC
 
 Please refer to the [corresponding documentation](advanced-setup.md#use-a-different-database-system) to learn about requirements for different database systems.
 
-```
-usage: freqtrade convert-db [-h] [--db-url PATH] [--db-url-from PATH]
-
-optional arguments:
-  -h, --help          show this help message and exit
-  --db-url PATH       Override trades database URL, this is useful in custom
-                      deployments (default: `sqlite:///tradesv3.sqlite` for
-                      Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
-                      Dry Run).
-  --db-url-from PATH  Source db url to use when migrating a database.
-```
+--8<-- "commands/convert-db.md"
 
 !!! Warning
     Please ensure to only use this on an empty target database. Freqtrade will perform a regular migration, but may fail if entries already existed.
@@ -556,30 +308,7 @@ Freqtrade will start the webserver and allow FreqUI to start and control backtes
 This has the advantage that data will not be reloaded between backtesting runs (as long as timeframe and timerange remain identical).
 FreqUI will also show the backtesting results.
 
-```
-usage: freqtrade webserver [-h] [-v] [--logfile FILE] [-V] [-c PATH] [-d PATH]
-                           [--userdir PATH]
-
-optional arguments:
-  -h, --help            show this help message and exit
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/webserver.md"
 
 ### Webserver mode - docker
 
@@ -609,37 +338,7 @@ Adding `--show-pair-list` outputs a sorted pair list you can easily copy/paste i
 ??? Warning "Strategy overfitting"
     Only using winning pairs can lead to an overfitted strategy, which will not work well on future data. Make sure to extensively test your strategy in dry-run before risking real money.
 
-```
-usage: freqtrade backtesting-show [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                  [-d PATH] [--userdir PATH]
-                                  [--export-filename PATH] [--show-pair-list]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --export-filename PATH
-                        Save backtest results to the file with this filename.
-                        Requires `--export` to be set as well. Example:
-                        `--export-filename=user_data/backtest_results/backtest
-                        _today.json`
-  --show-pair-list      Show backtesting pairlist sorted by profit.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/backtesting-show.md"
 
 ## Detailed backtest analysis
 
@@ -647,134 +346,13 @@ Advanced backtest result analysis.
 
 More details in the [Backtesting analysis](advanced-backtesting.md#analyze-the-buyentry-and-sellexit-tags) Section.
 
-```
-usage: freqtrade backtesting-analysis [-h] [-v] [--logfile FILE] [-V]
-                                      [-c PATH] [-d PATH] [--userdir PATH]
-                                      [--export-filename PATH]
-                                      [--analysis-groups {0,1,2,3,4} [{0,1,2,3,4} ...]]
-                                      [--enter-reason-list ENTER_REASON_LIST [ENTER_REASON_LIST ...]]
-                                      [--exit-reason-list EXIT_REASON_LIST [EXIT_REASON_LIST ...]]
-                                      [--indicator-list INDICATOR_LIST [INDICATOR_LIST ...]]
-                                      [--timerange YYYYMMDD-[YYYYMMDD]]
-                                      [--rejected]
-                                      [--analysis-to-csv]
-                                      [--analysis-csv-path PATH]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --export-filename PATH, --backtest-filename PATH
-                        Use this filename for backtest results.Requires
-                        `--export` to be set as well. Example: `--export-filen
-                        ame=user_data/backtest_results/backtest_today.json`
-  --analysis-groups {0,1,2,3,4} [{0,1,2,3,4} ...]
-                        grouping output - 0: simple wins/losses by enter tag,
-                        1: by enter_tag, 2: by enter_tag and exit_tag, 3: by
-                        pair and enter_tag, 4: by pair, enter_ and exit_tag
-                        (this can get quite large)
-  --enter-reason-list ENTER_REASON_LIST [ENTER_REASON_LIST ...]
-                        Space separated list of entry signals to analyse.
-                        Default: all. e.g. 'entry_tag_a entry_tag_b'
-  --exit-reason-list EXIT_REASON_LIST [EXIT_REASON_LIST ...]
-                        Space separated list of exit signals to analyse.
-                        Default: all. e.g.
-                        'exit_tag_a roi stop_loss trailing_stop_loss'
-  --indicator-list INDICATOR_LIST [INDICATOR_LIST ...]
-                        Space separated list of indicators to analyse. e.g.
-                        'close rsi bb_lowerband profit_abs'
-  --timerange YYYYMMDD-[YYYYMMDD]
-                        Timerange to filter trades for analysis, 
-                        start inclusive, end exclusive. e.g.
-                        20220101-20220201
-  --rejected
-                        Print out rejected trades table
-  --analysis-to-csv
-                        Write out tables to individual CSVs, by default to 
-                        'user_data/backtest_results' unless '--analysis-csv-path' is given.
-  --analysis-csv-path [PATH]
-                        Optional path where individual CSVs will be written. If not used,
-                        CSVs will be written to 'user_data/backtest_results'.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/backtesting-analysis.md"
 
 ## List Hyperopt results
 
 You can list the hyperoptimization epochs the Hyperopt module evaluated previously with the `hyperopt-list` sub-command.
 
-```
-usage: freqtrade hyperopt-list [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                               [-d PATH] [--userdir PATH] [--best]
-                               [--profitable] [--min-trades INT]
-                               [--max-trades INT] [--min-avg-time FLOAT]
-                               [--max-avg-time FLOAT] [--min-avg-profit FLOAT]
-                               [--max-avg-profit FLOAT]
-                               [--min-total-profit FLOAT]
-                               [--max-total-profit FLOAT]
-                               [--min-objective FLOAT] [--max-objective FLOAT]
-                               [--no-color] [--print-json] [--no-details]
-                               [--hyperopt-filename PATH] [--export-csv FILE]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --best                Select only best epochs.
-  --profitable          Select only profitable epochs.
-  --min-trades INT      Select epochs with more than INT trades.
-  --max-trades INT      Select epochs with less than INT trades.
-  --min-avg-time FLOAT  Select epochs above average time.
-  --max-avg-time FLOAT  Select epochs below average time.
-  --min-avg-profit FLOAT
-                        Select epochs above average profit.
-  --max-avg-profit FLOAT
-                        Select epochs below average profit.
-  --min-total-profit FLOAT
-                        Select epochs above total profit.
-  --max-total-profit FLOAT
-                        Select epochs below total profit.
-  --min-objective FLOAT
-                        Select epochs above objective.
-  --max-objective FLOAT
-                        Select epochs below objective.
-  --no-color            Disable colorization of hyperopt results. May be
-                        useful if you are redirecting output to a file.
-  --print-json          Print output in JSON format.
-  --no-details          Do not print best epoch details.
-  --hyperopt-filename FILENAME
-                        Hyperopt result filename.Example: `--hyperopt-
-                        filename=hyperopt_results_2020-09-27_16-20-48.pickle`
-  --export-csv FILE     Export to CSV-File. This will disable table print.
-                        Example: --export-csv hyperopt.csv
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-```
+--8<-- "commands/hyperopt-list.md"
 
 !!! Note
     `hyperopt-list` will automatically use the latest available hyperopt results file.
@@ -796,46 +374,7 @@ freqtrade hyperopt-list --profitable --no-details
 
 You can show the details of any hyperoptimization epoch previously evaluated by the Hyperopt module with the `hyperopt-show` subcommand.
 
-```
-usage: freqtrade hyperopt-show [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                               [-d PATH] [--userdir PATH] [--best]
-                               [--profitable] [-n INT] [--print-json]
-                               [--hyperopt-filename FILENAME] [--no-header]
-                               [--disable-param-export]
-                               [--breakdown {day,week,month} [{day,week,month} ...]]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --best                Select only best epochs.
-  --profitable          Select only profitable epochs.
-  -n INT, --index INT   Specify the index of the epoch to print details for.
-  --print-json          Print output in JSON format.
-  --hyperopt-filename FILENAME
-                        Hyperopt result filename.Example: `--hyperopt-
-                        filename=hyperopt_results_2020-09-27_16-20-48.pickle`
-  --no-header           Do not print epoch details header.
-  --disable-param-export
-                        Disable automatic hyperopt parameter export.
-  --breakdown {day,week,month} [{day,week,month} ...]
-                        Show backtesting breakdown per [day, week, month].
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/hyperopt-show.md"
 
 !!! Note
     `hyperopt-show` will automatically use the latest available hyperopt results file.
@@ -859,38 +398,7 @@ freqtrade hyperopt-show --best -n -1 --print-json --no-header
 
 Print selected (or all) trades from database to screen.
 
-```
-usage: freqtrade show-trades [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                             [-d PATH] [--userdir PATH] [--db-url PATH]
-                             [--trade-ids TRADE_IDS [TRADE_IDS ...]]
-                             [--print-json]
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --db-url PATH         Override trades database URL, this is useful in custom
-                        deployments (default: `sqlite:///tradesv3.sqlite` for
-                        Live Run mode, `sqlite:///tradesv3.dryrun.sqlite` for
-                        Dry Run).
-  --trade-ids TRADE_IDS [TRADE_IDS ...]
-                        Specify the list of trade ids.
-  --print-json          Print output in JSON format.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-```
+--8<-- "commands/show-trades.md"
 
 ### Examples
 
@@ -910,32 +418,4 @@ Your original strategy will remain available in the `user_data/strategies_orig_u
     Strategy updater will work on a "best effort" approach. Please do your due diligence and verify the results of the conversion.
     We also recommend to run a python formatter (e.g. `black`) to format results in a sane manner.
 
-```
-usage: freqtrade strategy-updater [-h] [-v] [--logfile FILE] [-V] [-c PATH]
-                                  [-d PATH] [--userdir PATH]
-                                  [--strategy-list STRATEGY_LIST [STRATEGY_LIST ...]]
-
-options:
-  -h, --help            show this help message and exit
-  --strategy-list STRATEGY_LIST [STRATEGY_LIST ...]
-                        Provide a space-separated list of strategies to
-                        be converted.
-
-Common arguments:
-  -v, --verbose         Verbose mode (-vv for more, -vvv to get all messages).
-  --logfile FILE, --log-file FILE
-                        Log to the file specified. Special values are:
-                        'syslog', 'journald'. See the documentation for more
-                        details.
-  -V, --version         show program's version number and exit
-  -c PATH, --config PATH
-                        Specify configuration file (default:
-                        `userdir/config.json` or `config.json` whichever
-                        exists). Multiple --config options may be used. Can be
-                        set to `-` to read config from stdin.
-  -d PATH, --datadir PATH, --data-dir PATH
-                        Path to directory with historical backtesting data.
-  --userdir PATH, --user-data-dir PATH
-                        Path to userdata directory.
-
-```
+--8<-- "commands/strategy-updater.md"

freqtrade/__init__.py

@@ -1,6 +1,6 @@
 """Freqtrade bot"""
 
-__version__ = "2024.11"
+__version__ = "2025.1"
 
 if "dev" in __version__:
     from pathlib import Path

freqtrade/commands/analyze_commands.py

@@ -1,63 +1,23 @@
 import logging
-from pathlib import Path
 from typing import Any
 
 from freqtrade.enums import RunMode
-from freqtrade.exceptions import ConfigurationError, OperationalException
 
 
 logger = logging.getLogger(__name__)
 
 
-def setup_analyze_configuration(args: dict[str, Any], method: RunMode) -> dict[str, Any]:
-    """
-    Prepare the configuration for the entry/exit reason analysis module
-    :param args: Cli args from Arguments()
-    :param method: Bot running mode
-    :return: Configuration
-    """
-    from freqtrade.configuration import setup_utils_configuration
-
-    config = setup_utils_configuration(args, method)
-
-    no_unlimited_runmodes = {
-        RunMode.BACKTEST: "backtesting",
-    }
-    if method in no_unlimited_runmodes.keys():
-        from freqtrade.data.btanalysis import get_latest_backtest_filename
-
-        if "exportfilename" in config:
-            if config["exportfilename"].is_dir():
-                btfile = Path(get_latest_backtest_filename(config["exportfilename"]))
-                signals_file = f"{config['exportfilename']}/{btfile.stem}_signals.pkl"
-            else:
-                if config["exportfilename"].exists():
-                    btfile = Path(config["exportfilename"])
-                    signals_file = f"{btfile.parent}/{btfile.stem}_signals.pkl"
-                else:
-                    raise ConfigurationError(f"{config['exportfilename']} does not exist.")
-        else:
-            raise ConfigurationError("exportfilename not in config.")
-
-        if not Path(signals_file).exists():
-            raise OperationalException(
-                f"Cannot find latest backtest signals file: {signals_file}."
-                "Run backtesting with `--export signals`."
-            )
-
-    return config
-
-
 def start_analysis_entries_exits(args: dict[str, Any]) -> None:
     """
     Start analysis script
     :param args: Cli args from Arguments()
     :return: None
     """
+    from freqtrade.configuration import setup_utils_configuration
     from freqtrade.data.entryexitanalysis import process_entry_exit_reasons
 
     # Initialize configuration
-    config = setup_analyze_configuration(args, RunMode.BACKTEST)
+    config = setup_utils_configuration(args, RunMode.BACKTEST)
 
     logger.info("Starting freqtrade in analysis mode")
 

freqtrade/commands/arguments.py

@@ -11,7 +11,15 @@ from freqtrade.commands.cli_options import AVAILABLE_CLI_OPTIONS
 from freqtrade.constants import DEFAULT_CONFIG
 
 
-ARGS_COMMON = ["verbosity", "logfile", "version", "config", "datadir", "user_data_dir"]
+ARGS_COMMON = [
+    "verbosity",
+    "print_colorized",
+    "logfile",
+    "version",
+    "config",
+    "datadir",
+    "user_data_dir",
+]
 
 ARGS_STRATEGY = [
     "strategy",
@@ -58,7 +66,6 @@ ARGS_HYPEROPT = ARGS_COMMON_OPTIMIZE + [
     "epochs",
     "spaces",
     "print_all",
-    "print_colorized",
     "print_json",
     "hyperopt_jobs",
     "hyperopt_random_state",
@@ -74,13 +81,12 @@ ARGS_EDGE = ARGS_COMMON_OPTIMIZE + ["stoploss_range"]
 ARGS_LIST_STRATEGIES = [
     "strategy_path",
     "print_one_column",
-    "print_colorized",
     "recursive_strategy_search",
 ]
 
-ARGS_LIST_FREQAIMODELS = ["freqaimodel_path", "print_one_column", "print_colorized"]
+ARGS_LIST_FREQAIMODELS = ["freqaimodel_path", "print_one_column"]
 
-ARGS_LIST_HYPEROPTS = ["hyperopt_path", "print_one_column", "print_colorized"]
+ARGS_LIST_HYPEROPTS = ["hyperopt_path", "print_one_column"]
 
 ARGS_BACKTEST_SHOW = ["exportfilename", "backtest_show_pair_list", "backtest_breakdown"]
 
@@ -202,7 +208,6 @@ ARGS_HYPEROPT_LIST = [
     "hyperopt_list_max_total_profit",
     "hyperopt_list_min_objective",
     "hyperopt_list_max_objective",
-    "print_colorized",
     "print_json",
     "hyperopt_list_no_details",
     "hyperoptexportfilename",
@@ -342,7 +347,7 @@ class Arguments:
         self.parser = ArgumentParser(
             prog="freqtrade", description="Free, open source crypto trading bot"
         )
-        self._build_args(optionlist=["version"], parser=self.parser)
+        self._build_args(optionlist=["version_main"], parser=self.parser)
 
         from freqtrade.commands import (
             start_analysis_entries_exits,

freqtrade/commands/cli_options.py

@@ -4,7 +4,7 @@ Definition of cli arguments used in arguments.py
 
 from argparse import SUPPRESS, ArgumentTypeError
 
-from freqtrade import __version__, constants
+from freqtrade import constants
 from freqtrade.constants import HYPEROPT_LOSS_BUILTIN
 from freqtrade.enums import CandleType
 
@@ -48,7 +48,6 @@ AVAILABLE_CLI_OPTIONS = {
         "--verbose",
         help="Verbose mode (-vv for more, -vvv to get all messages).",
         action="count",
-        default=0,
     ),
     "logfile": Arg(
         "--logfile",
@@ -60,8 +59,15 @@ AVAILABLE_CLI_OPTIONS = {
     "version": Arg(
         "-V",
         "--version",
-        action="version",
-        version=f"%(prog)s {__version__}",
+        help="show program's version number and exit",
+        action="store_true",
+    ),
+    "version_main": Arg(
+        # Copy of version - used to have -V available with and without subcommand.
+        "-V",
+        "--version",
+        help="show program's version number and exit",
+        action="store_true",
     ),
     "config": Arg(
         "-c",
@@ -335,7 +341,7 @@ AVAILABLE_CLI_OPTIONS = {
         help="Specify the class name of the hyperopt loss function class (IHyperOptLoss). "
         "Different functions can generate completely different results, "
         "since the target for optimization is different. Built-in Hyperopt-loss-functions are: "
-        f'{", ".join(HYPEROPT_LOSS_BUILTIN)}',
+        f"{', '.join(HYPEROPT_LOSS_BUILTIN)}",
         metavar="NAME",
     ),
     "hyperoptexportfilename": Arg(
@@ -664,8 +670,7 @@ AVAILABLE_CLI_OPTIONS = {
         "--ignore-missing-spaces",
         "--ignore-unparameterized-spaces",
         help=(
-            "Suppress errors for any requested Hyperopt spaces "
-            "that do not contain any parameters."
+            "Suppress errors for any requested Hyperopt spaces that do not contain any parameters."
         ),
         action="store_true",
     ),

freqtrade/commands/data_commands.py

@@ -15,8 +15,7 @@ logger = logging.getLogger(__name__)
 def _check_data_config_download_sanity(config: Config) -> None:
     if "days" in config and "timerange" in config:
         raise ConfigurationError(
-            "--days and --timerange are mutually exclusive. "
-            "You can only specify one or the other."
+            "--days and --timerange are mutually exclusive. You can only specify one or the other."
         )
 
     if "pairs" not in config:

freqtrade/commands/optimize_commands.py

@@ -17,7 +17,7 @@ def setup_optimize_configuration(args: dict[str, Any], method: RunMode) -> dict[
     :return: Configuration
     """
     from freqtrade.configuration import setup_utils_configuration
-    from freqtrade.util import fmt_coin
+    from freqtrade.util import fmt_coin, get_dry_run_wallet
 
     config = setup_utils_configuration(args, method)
 
@@ -26,7 +26,7 @@ def setup_optimize_configuration(args: dict[str, Any], method: RunMode) -> dict[
         RunMode.HYPEROPT: "hyperoptimization",
     }
     if method in no_unlimited_runmodes.keys():
-        wallet_size = config["dry_run_wallet"] * config["tradable_balance_ratio"]
+        wallet_size = get_dry_run_wallet(config) * config["tradable_balance_ratio"]
         # tradable_balance_ratio
         if (
             config["stake_amount"] != constants.UNLIMITED_STAKE_AMOUNT

freqtrade/configuration/config_schema.py

@@ -40,6 +40,10 @@ CONF_SCHEMA = {
             ),
             "type": "string",
         },
+        "proxy_coin": {
+            "description": "Proxy coin - must be used for specific futures modes (e.g. BNFCR)",
+            "type": "string",
+        },
         "stake_currency": {
             "description": "Currency used for staking.",
             "type": "string",
@@ -85,8 +89,10 @@ CONF_SCHEMA = {
         },
         "dry_run_wallet": {
             "description": "Initial wallet balance for dry run mode.",
-            "type": "number",
+            "type": ["number", "object"],
             "default": DRY_RUN_WALLET,
+            "patternProperties": {r"^[a-zA-Z0-9]+$": {"type": "number"}},
+            "additionalProperties": False,
         },
         "cancel_open_orders_on_exit": {
             "description": "Cancel open orders when exiting.",
@@ -458,7 +464,11 @@ CONF_SCHEMA = {
                 },
                 "token": {"description": "Telegram bot token.", "type": "string"},
                 "chat_id": {
-                    "description": "Telegram chat ID",
+                    "description": "Telegram chat or group ID",
+                    "type": "string",
+                },
+                "topic_id": {
+                    "description": "Telegram topic ID - only applicable for group chats",
                     "type": "string",
                 },
                 "allow_custom_messages": {
@@ -643,7 +653,7 @@ CONF_SCHEMA = {
                     "type": "array",
                     "items": {"type": "string"},
                 },
-                "x": {
+                "verbosity": {
                     "description": "Logging verbosity level.",
                     "type": "string",
                     "enum": ["error", "info"],

freqtrade/configuration/configuration.py

@@ -26,7 +26,7 @@ from freqtrade.enums import (
 )
 from freqtrade.exceptions import OperationalException
 from freqtrade.loggers import setup_logging
-from freqtrade.misc import deep_merge_dicts, parse_db_uri_for_logging
+from freqtrade.misc import deep_merge_dicts, parse_db_uri_for_logging, safe_value_fallback
 
 
 logger = logging.getLogger(__name__)
@@ -130,11 +130,20 @@ class Configuration:
         the -v/--verbose, --logfile options
         """
         # Log level
-        config.update({"verbosity": self.args.get("verbosity", 0)})
+        if "verbosity" not in config or self.args.get("verbosity") is not None:
+            config.update(
+                {"verbosity": safe_value_fallback(self.args, "verbosity", default_value=0)}
+            )
 
         if "logfile" in self.args and self.args["logfile"]:
             config.update({"logfile": self.args["logfile"]})
 
+        if "print_colorized" in self.args and not self.args["print_colorized"]:
+            logger.info("Parameter --no-color detected ...")
+            config.update({"print_colorized": False})
+        else:
+            config.update({"print_colorized": True})
+
         setup_logging(config)
 
     def _process_trading_options(self, config: Config) -> None:
@@ -326,12 +335,6 @@ class Configuration:
         ]
         self._args_to_config_loop(config, configurations)
 
-        if "print_colorized" in self.args and not self.args["print_colorized"]:
-            logger.info("Parameter --no-color detected ...")
-            config.update({"print_colorized": False})
-        else:
-            config.update({"print_colorized": True})
-
         configurations = [
             ("print_json", "Parameter --print-json detected ..."),
             ("export_csv", "Parameter --export-csv detected: {}"),

freqtrade/configuration/environment_vars.py

@@ -2,6 +2,8 @@ import logging
 import os
 from typing import Any
 
+import rapidjson
+
 from freqtrade.constants import ENV_VAR_PREFIX
 from freqtrade.misc import deep_merge_dicts
 
@@ -20,6 +22,14 @@ def _get_var_typed(val):
                 return True
             elif val.lower() in ("f", "false"):
                 return False
+            # try to convert from json
+            try:
+                value = rapidjson.loads(val)
+                # Limited to lists for now
+                if isinstance(value, list):
+                    return value
+            except rapidjson.JSONDecodeError:
+                pass
     # keep as string
     return val
 

freqtrade/configuration/timerange.py

@@ -10,6 +10,7 @@ from typing_extensions import Self
 
 from freqtrade.constants import DATETIME_PRINT_FORMAT
 from freqtrade.exceptions import ConfigurationError
+from freqtrade.util import dt_from_ts
 
 
 logger = logging.getLogger(__name__)
@@ -37,13 +38,13 @@ class TimeRange:
     @property
     def startdt(self) -> datetime | None:
         if self.startts:
-            return datetime.fromtimestamp(self.startts, tz=timezone.utc)
+            return dt_from_ts(self.startts)
         return None
 
     @property
     def stopdt(self) -> datetime | None:
         if self.stopts:
-            return datetime.fromtimestamp(self.stopts, tz=timezone.utc)
+            return dt_from_ts(self.stopts)
         return None
 
     @property

freqtrade/constants.py

@@ -58,7 +58,7 @@ AVAILABLE_PAIRLISTS = [
     "SpreadFilter",
     "VolatilityFilter",
 ]
-AVAILABLE_DATAHANDLERS = ["json", "jsongz", "hdf5", "feather", "parquet"]
+AVAILABLE_DATAHANDLERS = ["json", "jsongz", "feather", "parquet"]
 BACKTEST_BREAKDOWNS = ["day", "week", "month"]
 BACKTEST_CACHE_AGE = ["none", "day", "week", "month"]
 BACKTEST_CACHE_DEFAULT = "day"

freqtrade/data/btanalysis.py

@@ -3,8 +3,10 @@ Helpers when analyzing backtest data
 """
 
 import logging
+import zipfile
 from copy import copy
 from datetime import datetime, timezone
+from io import BytesIO, StringIO
 from pathlib import Path
 from typing import Any, Literal
 
@@ -165,8 +167,16 @@ def load_backtest_stats(filename: Path | str) -> BacktestResultType:
     if not filename.is_file():
         raise ValueError(f"File {filename} does not exist.")
     logger.info(f"Loading backtest result from {filename}")
-    with filename.open() as file:
-        data = json_load(file)
+
+    if filename.suffix == ".zip":
+        data = json_load(
+            StringIO(
+                load_file_from_zip(filename, filename.with_suffix(".json").name).decode("utf-8")
+            )
+        )
+    else:
+        with filename.open() as file:
+            data = json_load(file)
 
     # Legacy list format does not contain metadata.
     if isinstance(data, dict):
@@ -194,8 +204,10 @@ def load_and_merge_backtest_result(strategy_name: str, filename: Path, results:
 
 
 def _get_backtest_files(dirname: Path) -> list[Path]:
-    # Weird glob expression here avoids including .meta.json files.
-    return list(reversed(sorted(dirname.glob("backtest-result-*-[0-9][0-9].json"))))
+    # Get both json and zip files separately and combine the results
+    json_files = dirname.glob("backtest-result-*-[0-9][0-9]*.json")
+    zip_files = dirname.glob("backtest-result-*-[0-9][0-9]*.zip")
+    return list(reversed(sorted(list(json_files) + list(zip_files))))
 
 
 def _extract_backtest_result(filename: Path) -> list[BacktestHistoryEntryType]:
@@ -267,7 +279,11 @@ def get_backtest_market_change(filename: Path, include_ts: bool = True) -> pd.Da
     """
     Read backtest market change file.
     """
-    df = pd.read_feather(filename)
+    if filename.suffix == ".zip":
+        data = load_file_from_zip(filename, f"{filename.stem}_market_change.feather")
+        df = pd.read_feather(BytesIO(data))
+    else:
+        df = pd.read_feather(filename)
     if include_ts:
         df.loc[:, "__date_ts"] = df.loc[:, "date"].astype(np.int64) // 1000 // 1000
     return df
@@ -388,6 +404,93 @@ def load_backtest_data(filename: Path | str, strategy: str | None = None) -> pd.
     return df
 
 
+def load_file_from_zip(zip_path: Path, filename: str) -> bytes:
+    """
+    Load a file from a zip file
+    :param zip_path: Path to the zip file
+    :param filename: Name of the file to load
+    :return: Bytes of the file
+    :raises: ValueError if loading goes wrong.
+    """
+    try:
+        with zipfile.ZipFile(zip_path) as zipf:
+            try:
+                with zipf.open(filename) as file:
+                    return file.read()
+            except KeyError:
+                logger.error(f"File {filename} not found in zip: {zip_path}")
+                raise ValueError(f"File {filename} not found in zip: {zip_path}") from None
+    except FileNotFoundError:
+        raise ValueError(f"Zip file {zip_path} not found.")
+    except zipfile.BadZipFile:
+        logger.error(f"Bad zip file: {zip_path}.")
+        raise ValueError(f"Bad zip file: {zip_path}.") from None
+
+
+def load_backtest_analysis_data(backtest_dir: Path, name: str):
+    """
+    Load backtest analysis data either from a pickle file or from within a zip file
+    :param backtest_dir: Directory containing backtest results
+    :param name: Name of the analysis data to load (signals, rejected, exited)
+    :return: Analysis data
+    """
+    import joblib
+
+    if backtest_dir.is_dir():
+        lbf = Path(get_latest_backtest_filename(backtest_dir))
+        zip_path = backtest_dir / lbf
+    else:
+        zip_path = backtest_dir
+
+    if zip_path.suffix == ".zip":
+        # Load from zip file
+        analysis_name = f"{zip_path.stem}_{name}.pkl"
+        data = load_file_from_zip(zip_path, analysis_name)
+        if not data:
+            return None
+        loaded_data = joblib.load(BytesIO(data))
+
+        logger.info(f"Loaded {name} candles from zip: {str(zip_path)}:{analysis_name}")
+        return loaded_data
+
+    else:
+        # Load from separate pickle file
+        if backtest_dir.is_dir():
+            scpf = Path(backtest_dir, f"{zip_path.stem}_{name}.pkl")
+        else:
+            scpf = Path(backtest_dir.parent / f"{backtest_dir.stem}_{name}.pkl")
+
+        try:
+            with scpf.open("rb") as scp:
+                loaded_data = joblib.load(scp)
+                logger.info(f"Loaded {name} candles: {str(scpf)}")
+                return loaded_data
+        except Exception:
+            logger.exception(f"Cannot load {name} data from pickled results.")
+            return None
+
+
+def load_rejected_signals(backtest_dir: Path):
+    """
+    Load rejected signals from backtest directory
+    """
+    return load_backtest_analysis_data(backtest_dir, "rejected")
+
+
+def load_signal_candles(backtest_dir: Path):
+    """
+    Load signal candles from backtest directory
+    """
+    return load_backtest_analysis_data(backtest_dir, "signals")
+
+
+def load_exit_signal_candles(backtest_dir: Path) -> dict[str, dict[str, pd.DataFrame]]:
+    """
+    Load exit signal candles from backtest directory
+    """
+    return load_backtest_analysis_data(backtest_dir, "exited")
+
+
 def analyze_trade_parallelism(results: pd.DataFrame, timeframe: str) -> pd.DataFrame:
     """
     Find overlapping trades by expanding each trade once per period it was open

freqtrade/data/converter/orderflow.py

@@ -4,20 +4,31 @@ Functions to convert orderflow data from public_trades
 
 import logging
 import time
-import typing
-from collections import OrderedDict
 from datetime import datetime
 
 import numpy as np
 import pandas as pd
 
 from freqtrade.constants import DEFAULT_ORDERFLOW_COLUMNS, Config
-from freqtrade.enums import RunMode
 from freqtrade.exceptions import DependencyException
 
 
 logger = logging.getLogger(__name__)
 
+ORDERFLOW_ADDED_COLUMNS = [
+    "trades",
+    "orderflow",
+    "imbalances",
+    "stacked_imbalances_bid",
+    "stacked_imbalances_ask",
+    "max_delta",
+    "min_delta",
+    "bid",
+    "ask",
+    "delta",
+    "total_trades",
+]
+
 
 def _init_dataframe_with_trades_columns(dataframe: pd.DataFrame):
     """
@@ -25,53 +36,73 @@ def _init_dataframe_with_trades_columns(dataframe: pd.DataFrame):
     :param dataframe: Dataframe to populate
     """
     # Initialize columns with appropriate dtypes
-    dataframe["trades"] = np.nan
-    dataframe["orderflow"] = np.nan
-    dataframe["imbalances"] = np.nan
-    dataframe["stacked_imbalances_bid"] = np.nan
-    dataframe["stacked_imbalances_ask"] = np.nan
-    dataframe["max_delta"] = np.nan
-    dataframe["min_delta"] = np.nan
-    dataframe["bid"] = np.nan
-    dataframe["ask"] = np.nan
-    dataframe["delta"] = np.nan
-    dataframe["total_trades"] = np.nan
+    for column in ORDERFLOW_ADDED_COLUMNS:
+        dataframe[column] = np.nan
 
-    # Ensure the 'trades' column is of object type
-    dataframe["trades"] = dataframe["trades"].astype(object)
-    dataframe["orderflow"] = dataframe["orderflow"].astype(object)
-    dataframe["imbalances"] = dataframe["imbalances"].astype(object)
-    dataframe["stacked_imbalances_bid"] = dataframe["stacked_imbalances_bid"].astype(object)
-    dataframe["stacked_imbalances_ask"] = dataframe["stacked_imbalances_ask"].astype(object)
+    # Set columns to object type
+    for column in (
+        "trades",
+        "orderflow",
+        "imbalances",
+        "stacked_imbalances_bid",
+        "stacked_imbalances_ask",
+    ):
+        dataframe[column] = dataframe[column].astype(object)
+
+
+def timeframe_to_DateOffset(timeframe: str) -> pd.DateOffset:
+    """
+    Translates the timeframe interval value written in the human readable
+    form ('1m', '5m', '1h', '1d', '1w', etc.) to the number
+    of seconds for one timeframe interval.
+    """
+    from freqtrade.exchange import timeframe_to_seconds
+
+    timeframe_seconds = timeframe_to_seconds(timeframe)
+    timeframe_minutes = timeframe_seconds // 60
+    if timeframe_minutes < 1:
+        return pd.DateOffset(seconds=timeframe_seconds)
+    elif 59 < timeframe_minutes < 1440:
+        return pd.DateOffset(hours=timeframe_minutes // 60)
+    elif 1440 <= timeframe_minutes < 10080:
+        return pd.DateOffset(days=timeframe_minutes // 1440)
+    elif 10000 < timeframe_minutes < 43200:
+        return pd.DateOffset(weeks=1)
+    elif timeframe_minutes >= 43200 and timeframe_minutes < 525600:
+        return pd.DateOffset(months=1)
+    elif timeframe == "1y":
+        return pd.DateOffset(years=1)
+    else:
+        return pd.DateOffset(minutes=timeframe_minutes)
 
 
 def _calculate_ohlcv_candle_start_and_end(df: pd.DataFrame, timeframe: str):
-    from freqtrade.exchange import timeframe_to_next_date, timeframe_to_resample_freq
+    from freqtrade.exchange import timeframe_to_resample_freq
 
-    timeframe_frequency = timeframe_to_resample_freq(timeframe)
-    # calculate ohlcv candle start and end
     if df is not None and not df.empty:
+        timeframe_frequency = timeframe_to_resample_freq(timeframe)
+        dofs = timeframe_to_DateOffset(timeframe)
+        # calculate ohlcv candle start and end
         df["datetime"] = pd.to_datetime(df["date"], unit="ms")
         df["candle_start"] = df["datetime"].dt.floor(timeframe_frequency)
         # used in _now_is_time_to_refresh_trades
-        df["candle_end"] = df["candle_start"].apply(
-            lambda candle_start: timeframe_to_next_date(timeframe, candle_start)
-        )
+        df["candle_end"] = df["candle_start"] + dofs
         df.drop(columns=["datetime"], inplace=True)
 
 
 def populate_dataframe_with_trades(
-    cached_grouped_trades: OrderedDict[tuple[datetime, datetime], pd.DataFrame],
+    cached_grouped_trades: pd.DataFrame | None,
     config: Config,
     dataframe: pd.DataFrame,
     trades: pd.DataFrame,
-) -> tuple[pd.DataFrame, OrderedDict[tuple[datetime, datetime], pd.DataFrame]]:
+) -> tuple[pd.DataFrame, pd.DataFrame]:
     """
     Populates a dataframe with trades
     :param dataframe: Dataframe to populate
     :param trades: Trades to populate with
     :return: Dataframe with trades populated
     """
+
     timeframe = config["timeframe"]
     config_orderflow = config["orderflow"]
 
@@ -94,71 +125,52 @@ def populate_dataframe_with_trades(
 
         # group trades by candle start
         trades_grouped_by_candle_start = trades.groupby("candle_start", group_keys=False)
-        # Create Series to hold complex data
-        trades_series = pd.Series(index=dataframe.index, dtype=object)
-        orderflow_series = pd.Series(index=dataframe.index, dtype=object)
-        imbalances_series = pd.Series(index=dataframe.index, dtype=object)
-        stacked_imbalances_bid_series = pd.Series(index=dataframe.index, dtype=object)
-        stacked_imbalances_ask_series = pd.Series(index=dataframe.index, dtype=object)
 
-        trades_grouped_by_candle_start = trades.groupby("candle_start", group_keys=False)
+        candle_start: datetime
         for candle_start, trades_grouped_df in trades_grouped_by_candle_start:
             is_between = candle_start == dataframe["date"]
             if is_between.any():
-                from freqtrade.exchange import timeframe_to_next_date
+                # there can only be one row with the same date
+                index = dataframe.index[is_between][0]
 
-                candle_next = timeframe_to_next_date(timeframe, typing.cast(datetime, candle_start))
-                if candle_next not in trades_grouped_by_candle_start.groups:
-                    logger.warning(
-                        f"candle at {candle_start} with {len(trades_grouped_df)} trades "
-                        f"might be unfinished, because no finished trades at {candle_next}"
-                    )
-
-                indices = dataframe.index[is_between].tolist()
-                # Add trades to each candle
-                trades_series.loc[indices] = [
-                    trades_grouped_df.drop(columns=["candle_start", "candle_end"]).to_dict(
-                        orient="records"
-                    )
-                ]
-                # Use caching mechanism
-                if (candle_start, candle_next) in cached_grouped_trades:
-                    cache_entry = cached_grouped_trades[
-                        (typing.cast(datetime, candle_start), candle_next)
-                    ]
-                    # dataframe.loc[is_between] = cache_entry # doesn't take, so we need workaround:
-                    # Create a dictionary of the column values to be assigned
-                    update_dict = {c: cache_entry[c].iat[0] for c in cache_entry.columns}
-                    # Assign the values using the update_dict
-                    dataframe.loc[is_between, update_dict.keys()] = pd.DataFrame(
-                        [update_dict], index=dataframe.loc[is_between].index
-                    )
+                if (
+                    cached_grouped_trades is not None
+                    and (candle_start == cached_grouped_trades["date"]).any()
+                ):
+                    # Check if the trades are already in the cache
+                    cache_idx = cached_grouped_trades.index[
+                        cached_grouped_trades["date"] == candle_start
+                    ][0]
+                    for col in ORDERFLOW_ADDED_COLUMNS:
+                        dataframe.at[index, col] = cached_grouped_trades.at[cache_idx, col]
                     continue
 
+                dataframe.at[index, "trades"] = trades_grouped_df.drop(
+                    columns=["candle_start", "candle_end"]
+                ).to_dict(orient="records")
+
                 # Calculate orderflow for each candle
                 orderflow = trades_to_volumeprofile_with_total_delta_bid_ask(
                     trades_grouped_df, scale=config_orderflow["scale"]
                 )
-                orderflow_series.loc[indices] = [orderflow.to_dict(orient="index")]
+                dataframe.at[index, "orderflow"] = orderflow.to_dict(orient="index")
+                # orderflow_series.loc[[index]] = [orderflow.to_dict(orient="index")]
                 # Calculate imbalances for each candle's orderflow
                 imbalances = trades_orderflow_to_imbalances(
                     orderflow,
                     imbalance_ratio=config_orderflow["imbalance_ratio"],
                     imbalance_volume=config_orderflow["imbalance_volume"],
                 )
-                imbalances_series.loc[indices] = [imbalances.to_dict(orient="index")]
+                dataframe.at[index, "imbalances"] = imbalances.to_dict(orient="index")
 
                 stacked_imbalance_range = config_orderflow["stacked_imbalance_range"]
-                stacked_imbalances_bid_series.loc[indices] = [
-                    stacked_imbalance_bid(
-                        imbalances, stacked_imbalance_range=stacked_imbalance_range
-                    )
-                ]
-                stacked_imbalances_ask_series.loc[indices] = [
-                    stacked_imbalance_ask(
-                        imbalances, stacked_imbalance_range=stacked_imbalance_range
-                    )
-                ]
+                dataframe.at[index, "stacked_imbalances_bid"] = stacked_imbalance(
+                    imbalances, label="bid", stacked_imbalance_range=stacked_imbalance_range
+                )
+
+                dataframe.at[index, "stacked_imbalances_ask"] = stacked_imbalance(
+                    imbalances, label="ask", stacked_imbalance_range=stacked_imbalance_range
+                )
 
                 bid = np.where(
                     trades_grouped_df["side"].str.contains("sell"), trades_grouped_df["amount"], 0
@@ -168,39 +180,20 @@ def populate_dataframe_with_trades(
                     trades_grouped_df["side"].str.contains("buy"), trades_grouped_df["amount"], 0
                 )
                 deltas_per_trade = ask - bid
-                min_delta = deltas_per_trade.cumsum().min()
-                max_delta = deltas_per_trade.cumsum().max()
-                dataframe.loc[indices, "max_delta"] = max_delta
-                dataframe.loc[indices, "min_delta"] = min_delta
+                dataframe.at[index, "max_delta"] = deltas_per_trade.cumsum().max()
+                dataframe.at[index, "min_delta"] = deltas_per_trade.cumsum().min()
 
-                dataframe.loc[indices, "bid"] = bid.sum()
-                dataframe.loc[indices, "ask"] = ask.sum()
-                dataframe.loc[indices, "delta"] = (
-                    dataframe.loc[indices, "ask"] - dataframe.loc[indices, "bid"]
+                dataframe.at[index, "bid"] = bid.sum()
+                dataframe.at[index, "ask"] = ask.sum()
+                dataframe.at[index, "delta"] = (
+                    dataframe.at[index, "ask"] - dataframe.at[index, "bid"]
                 )
-                dataframe.loc[indices, "total_trades"] = len(trades_grouped_df)
+                dataframe.at[index, "total_trades"] = len(trades_grouped_df)
 
-                # Cache the result
-                cached_grouped_trades[(typing.cast(datetime, candle_start), candle_next)] = (
-                    dataframe.loc[is_between].copy()
-                )
-
-                # Maintain cache size
-                if (
-                    config.get("runmode") in (RunMode.DRY_RUN, RunMode.LIVE)
-                    and len(cached_grouped_trades) > config_orderflow["cache_size"]
-                ):
-                    cached_grouped_trades.popitem(last=False)
-            else:
-                logger.debug(f"Found NO candles for trades starting with {candle_start}")
         logger.debug(f"trades.groups_keys in {time.time() - start_time} seconds")
 
-        # Merge the complex data Series back into the DataFrame
-        dataframe["trades"] = trades_series
-        dataframe["orderflow"] = orderflow_series
-        dataframe["imbalances"] = imbalances_series
-        dataframe["stacked_imbalances_bid"] = stacked_imbalances_bid_series
-        dataframe["stacked_imbalances_ask"] = stacked_imbalances_ask_series
+        # Cache the entire dataframe
+        cached_grouped_trades = dataframe.tail(config_orderflow["cache_size"]).copy()
 
     except Exception as e:
         logger.exception("Error populating dataframe with trades")
@@ -263,34 +256,24 @@ def trades_orderflow_to_imbalances(df: pd.DataFrame, imbalance_ratio: int, imbal
     return dataframe
 
 
-def stacked_imbalance(
-    df: pd.DataFrame, label: str, stacked_imbalance_range: int, should_reverse: bool
-):
+def stacked_imbalance(df: pd.DataFrame, label: str, stacked_imbalance_range: int):
     """
     y * (y.groupby((y != y.shift()).cumsum()).cumcount() + 1)
     https://stackoverflow.com/questions/27626542/counting-consecutive-positive-values-in-python-pandas-array
     """
     imbalance = df[f"{label}_imbalance"]
     int_series = pd.Series(np.where(imbalance, 1, 0))
-    stacked = int_series * (
-        int_series.groupby((int_series != int_series.shift()).cumsum()).cumcount() + 1
-    )
+    # Group consecutive True values and get their counts
+    groups = (int_series != int_series.shift()).cumsum()
+    counts = int_series.groupby(groups).cumsum()
 
-    max_stacked_imbalance_idx = stacked.index[stacked >= stacked_imbalance_range]
-    stacked_imbalance_price = np.nan
-    if not max_stacked_imbalance_idx.empty:
-        idx = (
-            max_stacked_imbalance_idx[0]
-            if not should_reverse
-            else np.flipud(max_stacked_imbalance_idx)[0]
-        )
-        stacked_imbalance_price = imbalance.index[idx]
-    return stacked_imbalance_price
+    # Find indices where count meets or exceeds the range requirement
+    valid_indices = counts[counts >= stacked_imbalance_range].index
 
-
-def stacked_imbalance_ask(df: pd.DataFrame, stacked_imbalance_range: int):
-    return stacked_imbalance(df, "ask", stacked_imbalance_range, should_reverse=True)
-
-
-def stacked_imbalance_bid(df: pd.DataFrame, stacked_imbalance_range: int):
-    return stacked_imbalance(df, "bid", stacked_imbalance_range, should_reverse=False)
+    stacked_imbalance_prices = []
+    if not valid_indices.empty:
+        # Get all prices from valid indices from beginning of the range
+        stacked_imbalance_prices = [
+            imbalance.index.values[idx - (stacked_imbalance_range - 1)] for idx in valid_indices
+        ]
+    return stacked_imbalance_prices

freqtrade/data/dataprovider.py

@@ -79,7 +79,7 @@ class DataProvider:
 
     def _set_dataframe_max_date(self, limit_date: datetime):
         """
-        Limit infomrative dataframe to max specified index.
+        Limit informative dataframe to max specified index.
         Only relevant in backtesting.
         :param limit_date: "current date"
         """

freqtrade/data/entryexitanalysis.py

@@ -1,56 +1,25 @@
 import logging
 from pathlib import Path
 
-import joblib
 import pandas as pd
 
 from freqtrade.configuration import TimeRange
 from freqtrade.constants import Config
 from freqtrade.data.btanalysis import (
     BT_DATA_COLUMNS,
-    get_latest_backtest_filename,
     load_backtest_data,
     load_backtest_stats,
+    load_exit_signal_candles,
+    load_rejected_signals,
+    load_signal_candles,
 )
-from freqtrade.exceptions import OperationalException
+from freqtrade.exceptions import ConfigurationError, OperationalException
 from freqtrade.util import print_df_rich_table
 
 
 logger = logging.getLogger(__name__)
 
 
-def _load_backtest_analysis_data(backtest_dir: Path, name: str):
-    if backtest_dir.is_dir():
-        scpf = Path(
-            backtest_dir,
-            Path(get_latest_backtest_filename(backtest_dir)).stem + "_" + name + ".pkl",
-        )
-    else:
-        scpf = Path(backtest_dir.parent / f"{backtest_dir.stem}_{name}.pkl")
-
-    try:
-        with scpf.open("rb") as scp:
-            loaded_data = joblib.load(scp)
-            logger.info(f"Loaded {name} candles: {str(scpf)}")
-    except Exception as e:
-        logger.error(f"Cannot load {name} data from pickled results: ", e)
-        return None
-
-    return loaded_data
-
-
-def _load_rejected_signals(backtest_dir: Path):
-    return _load_backtest_analysis_data(backtest_dir, "rejected")
-
-
-def _load_signal_candles(backtest_dir: Path):
-    return _load_backtest_analysis_data(backtest_dir, "signals")
-
-
-def _load_exit_signal_candles(backtest_dir: Path) -> dict[str, dict[str, pd.DataFrame]]:
-    return _load_backtest_analysis_data(backtest_dir, "exited")
-
-
 def _process_candles_and_indicators(
     pairlist, strategy_name, trades, signal_candles, date_col: str = "open_date"
 ):
@@ -374,19 +343,21 @@ def process_entry_exit_reasons(config: Config):
         timerange = TimeRange.parse_timerange(
             None if config.get("timerange") is None else str(config.get("timerange"))
         )
-
-        backtest_stats = load_backtest_stats(config["exportfilename"])
+        try:
+            backtest_stats = load_backtest_stats(config["exportfilename"])
+        except ValueError as e:
+            raise ConfigurationError(e) from e
 
         for strategy_name, results in backtest_stats["strategy"].items():
             trades = load_backtest_data(config["exportfilename"], strategy_name)
 
             if trades is not None and not trades.empty:
-                signal_candles = _load_signal_candles(config["exportfilename"])
-                exit_signals = _load_exit_signal_candles(config["exportfilename"])
+                signal_candles = load_signal_candles(config["exportfilename"])
+                exit_signals = load_exit_signal_candles(config["exportfilename"])
 
                 rej_df = None
                 if do_rejected:
-                    rejected_signals_dict = _load_rejected_signals(config["exportfilename"])
+                    rejected_signals_dict = load_rejected_signals(config["exportfilename"])
                     rej_df = prepare_results(
                         rejected_signals_dict,
                         strategy_name,

freqtrade/data/history/datahandlers/hdf5datahandler.py

@@ -1,181 +0,0 @@
-import logging
-
-import numpy as np
-import pandas as pd
-
-from freqtrade.configuration import TimeRange
-from freqtrade.constants import DEFAULT_DATAFRAME_COLUMNS, DEFAULT_TRADES_COLUMNS
-from freqtrade.enums import CandleType, TradingMode
-
-from .idatahandler import IDataHandler
-
-
-logger = logging.getLogger(__name__)
-
-
-class HDF5DataHandler(IDataHandler):
-    _columns = DEFAULT_DATAFRAME_COLUMNS
-
-    def ohlcv_store(
-        self, pair: str, timeframe: str, data: pd.DataFrame, candle_type: CandleType
-    ) -> None:
-        """
-        Store data in hdf5 file.
-        :param pair: Pair - used to generate filename
-        :param timeframe: Timeframe - used to generate filename
-        :param data: Dataframe containing OHLCV data
-        :param candle_type: Any of the enum CandleType (must match trading mode!)
-        :return: None
-        """
-        key = self._pair_ohlcv_key(pair, timeframe)
-        _data = data.copy()
-
-        filename = self._pair_data_filename(self._datadir, pair, timeframe, candle_type)
-        self.create_dir_if_needed(filename)
-
-        _data.loc[:, self._columns].to_hdf(
-            filename,
-            key=key,
-            mode="a",
-            complevel=9,
-            complib="blosc",
-            format="table",
-            data_columns=["date"],
-        )
-
-    def _ohlcv_load(
-        self, pair: str, timeframe: str, timerange: TimeRange | None, candle_type: CandleType
-    ) -> pd.DataFrame:
-        """
-        Internal method used to load data for one pair from disk.
-        Implements the loading and conversion to a Pandas dataframe.
-        Timerange trimming and dataframe validation happens outside of this method.
-        :param pair: Pair to load data
-        :param timeframe: Timeframe (e.g. "5m")
-        :param timerange: Limit data to be loaded to this timerange.
-                        Optionally implemented by subclasses to avoid loading
-                        all data where possible.
-        :param candle_type: Any of the enum CandleType (must match trading mode!)
-        :return: DataFrame with ohlcv data, or empty DataFrame
-        """
-        key = self._pair_ohlcv_key(pair, timeframe)
-        filename = self._pair_data_filename(self._datadir, pair, timeframe, candle_type=candle_type)
-
-        if not filename.exists():
-            # Fallback mode for 1M files
-            filename = self._pair_data_filename(
-                self._datadir, pair, timeframe, candle_type=candle_type, no_timeframe_modify=True
-            )
-            if not filename.exists():
-                return pd.DataFrame(columns=self._columns)
-        try:
-            where = []
-            if timerange:
-                if timerange.starttype == "date":
-                    where.append(f"date >= Timestamp({timerange.startts * 1e9})")
-                if timerange.stoptype == "date":
-                    where.append(f"date <= Timestamp({timerange.stopts * 1e9})")
-
-            pairdata = pd.read_hdf(filename, key=key, mode="r", where=where)
-
-            if list(pairdata.columns) != self._columns:
-                raise ValueError("Wrong dataframe format")
-            pairdata = pairdata.astype(
-                dtype={
-                    "open": "float",
-                    "high": "float",
-                    "low": "float",
-                    "close": "float",
-                    "volume": "float",
-                }
-            )
-            pairdata = pairdata.reset_index(drop=True)
-            return pairdata
-        except ValueError:
-            raise
-        except Exception as e:
-            logger.exception(
-                f"Error loading data from {filename}. Exception: {e}. Returning empty dataframe."
-            )
-            return pd.DataFrame(columns=self._columns)
-
-    def ohlcv_append(
-        self, pair: str, timeframe: str, data: pd.DataFrame, candle_type: CandleType
-    ) -> None:
-        """
-        Append data to existing data structures
-        :param pair: Pair
-        :param timeframe: Timeframe this ohlcv data is for
-        :param data: Data to append.
-        :param candle_type: Any of the enum CandleType (must match trading mode!)
-        """
-        raise NotImplementedError()
-
-    def _trades_store(self, pair: str, data: pd.DataFrame, trading_mode: TradingMode) -> None:
-        """
-        Store trades data (list of Dicts) to file
-        :param pair: Pair - used for filename
-        :param data: Dataframe containing trades
-                     column sequence as in DEFAULT_TRADES_COLUMNS
-        :param trading_mode: Trading mode to use (used to determine the filename)
-        """
-        key = self._pair_trades_key(pair)
-
-        data.to_hdf(
-            self._pair_trades_filename(self._datadir, pair, trading_mode),
-            key=key,
-            mode="a",
-            complevel=9,
-            complib="blosc",
-            format="table",
-            data_columns=["timestamp"],
-        )
-
-    def trades_append(self, pair: str, data: pd.DataFrame):
-        """
-        Append data to existing files
-        :param pair: Pair - used for filename
-        :param data: Dataframe containing trades
-                     column sequence as in DEFAULT_TRADES_COLUMNS
-        """
-        raise NotImplementedError()
-
-    def _trades_load(
-        self, pair: str, trading_mode: TradingMode, timerange: TimeRange | None = None
-    ) -> pd.DataFrame:
-        """
-        Load a pair from h5 file.
-        :param pair: Load trades for this pair
-        :param trading_mode: Trading mode to use (used to determine the filename)
-        :param timerange: Timerange to load trades for - currently not implemented
-        :return: Dataframe containing trades
-        """
-        key = self._pair_trades_key(pair)
-        filename = self._pair_trades_filename(self._datadir, pair, trading_mode)
-
-        if not filename.exists():
-            return pd.DataFrame(columns=DEFAULT_TRADES_COLUMNS)
-        where = []
-        if timerange:
-            if timerange.starttype == "date":
-                where.append(f"timestamp >= {timerange.startts * 1e3}")
-            if timerange.stoptype == "date":
-                where.append(f"timestamp < {timerange.stopts * 1e3}")
-
-        trades: pd.DataFrame = pd.read_hdf(filename, key=key, mode="r", where=where)
-        trades[["id", "type"]] = trades[["id", "type"]].replace({np.nan: None})
-        return trades
-
-    @classmethod
-    def _get_file_extension(cls):
-        return "h5"
-
-    @classmethod
-    def _pair_ohlcv_key(cls, pair: str, timeframe: str) -> str:
-        # Escape futures pairs to avoid warnings
-        pair_esc = pair.replace(":", "_")
-        return f"{pair_esc}/ohlcv/tf_{timeframe}"
-
-    @classmethod
-    def _pair_trades_key(cls, pair: str) -> str:
-        return f"{pair}/trades"

freqtrade/data/history/datahandlers/idatahandler.py

@@ -23,6 +23,7 @@ from freqtrade.data.converter import (
     trim_dataframe,
 )
 from freqtrade.enums import CandleType, TradingMode
+from freqtrade.exceptions import OperationalException
 from freqtrade.exchange import timeframe_to_seconds
 
 
@@ -549,9 +550,13 @@ def get_datahandlerclass(datatype: str) -> type[IDataHandler]:
 
         return JsonGzDataHandler
     elif datatype == "hdf5":
-        from .hdf5datahandler import HDF5DataHandler
+        raise OperationalException(
+            "DEPRECATED: The hdf5 dataformat is deprecated and has been removed in 2025.1. "
+            "Please downgrade to 2024.12 and use the convert-data command to convert your data "
+            "to a supported format."
+            "We recommend using the feather format, as it is faster and is more space-efficient."
+        )
 
-        return HDF5DataHandler
     elif datatype == "feather":
         from .featherdatahandler import FeatherDataHandler
 

freqtrade/data/history/history_utils.py

@@ -19,6 +19,7 @@ from freqtrade.exceptions import OperationalException
 from freqtrade.exchange import Exchange
 from freqtrade.plugins.pairlist.pairlist_helpers import dynamic_expand_pairlist
 from freqtrade.util import dt_now, dt_ts, format_ms_time
+from freqtrade.util.datetime_helpers import format_ms_time_det
 from freqtrade.util.migrations import migrate_data
 from freqtrade.util.progress_tracker import CustomProgress, retrieve_progress_tracker
 
@@ -259,8 +260,8 @@ def _download_pair_history(
         logger.info(
             f'Download history data for "{pair}", {timeframe}, '
             f"{candle_type} and store in {datadir}. "
-            f'From {format_ms_time(since_ms) if since_ms else "start"} to '
-            f'{format_ms_time(until_ms) if until_ms else "now"}'
+            f"From {format_ms_time(since_ms) if since_ms else 'start'} to "
+            f"{format_ms_time(until_ms) if until_ms else 'now'}"
         )
 
         logger.debug(
@@ -285,6 +286,7 @@ def _download_pair_history(
             candle_type=candle_type,
             until_ms=until_ms if until_ms else None,
         )
+        logger.info(f"Downloaded data for {pair} with length {len(new_dataframe)}.")
         if data.empty:
             data = new_dataframe
         else:
@@ -430,11 +432,11 @@ def _download_trades_history(
     # DEFAULT_TRADES_COLUMNS: 0 -> timestamp
     # DEFAULT_TRADES_COLUMNS: 1 -> id
 
-    if not trades.empty and since > 0 and since < trades.iloc[0]["timestamp"]:
+    if not trades.empty and since > 0 and (since + 1000) < trades.iloc[0]["timestamp"]:
         # since is before the first trade
         raise ValueError(
-            f"Start {format_ms_time(since)} earlier than "
-            f"available data ({trades.iloc[0]['date']:{DATETIME_PRINT_FORMAT}}). "
+            f"Start {format_ms_time_det(since)} earlier than "
+            f"available data ({format_ms_time_det(trades.iloc[0]['timestamp'])}). "
             f"Please use `--erase` if you'd like to redownload {pair}."
         )
 
@@ -442,7 +444,7 @@ def _download_trades_history(
     if not trades.empty and since < trades.iloc[-1]["timestamp"]:
         # Reset since to the last available point
         # - 5 seconds (to ensure we're getting all trades)
-        since = trades.iloc[-1]["timestamp"] - (5 * 1000)
+        since = int(trades.iloc[-1]["timestamp"] - (5 * 1000))
         logger.info(
             f"Using last trade date -5s - Downloading trades for {pair} "
             f"since: {format_ms_time(since)}."
@@ -461,7 +463,6 @@ def _download_trades_history(
     )
     logger.info(f"Current Amount of trades: {len(trades)}")
 
-    # Default since_ms to 30 days if nothing is given
     new_trades = exchange.get_historic_trades(
         pair=pair,
         since=since,
@@ -603,7 +604,7 @@ def download_data(
     Download data function. Used from both cli and API.
     """
     timerange = TimeRange()
-    if "days" in config:
+    if "days" in config and config["days"] is not None:
         time_since = (datetime.now() - timedelta(days=config["days"])).strftime("%Y%m%d")
         timerange = TimeRange.parse_timerange(f"{time_since}-")
 
@@ -678,11 +679,17 @@ def download_data(
                 )
         else:
             if not exchange.get_option("ohlcv_has_history", True):
-                raise OperationalException(
-                    f"Historic klines not available for {exchange.name}. "
-                    "Please use `--dl-trades` instead for this exchange "
-                    "(will unfortunately take a long time)."
-                )
+                if not exchange.get_option("trades_has_history", True):
+                    raise OperationalException(
+                        f"Historic data not available for {exchange.name}. "
+                        f"{exchange.name} does not support downloading trades or ohlcv data."
+                    )
+                else:
+                    raise OperationalException(
+                        f"Historic klines not available for {exchange.name}. "
+                        "Please use `--dl-trades` instead for this exchange "
+                        "(will unfortunately take a long time)."
+                    )
             migrate_data(config, exchange)
             pairs_not_available = refresh_backtest_ohlcv_data(
                 exchange,

freqtrade/exchange/binance.py

@@ -5,13 +5,18 @@ from datetime import datetime, timezone
 from pathlib import Path
 
 import ccxt
+from pandas import DataFrame
 
+from freqtrade.constants import DEFAULT_DATAFRAME_COLUMNS
 from freqtrade.enums import CandleType, MarginMode, PriceType, TradingMode
 from freqtrade.exceptions import DDosProtection, OperationalException, TemporaryError
 from freqtrade.exchange import Exchange
+from freqtrade.exchange.binance_public_data import concat_safe, download_archive_ohlcv
 from freqtrade.exchange.common import retrier
-from freqtrade.exchange.exchange_types import FtHas, OHLCVResponse, Tickers
+from freqtrade.exchange.exchange_types import FtHas, Tickers
+from freqtrade.exchange.exchange_utils_timeframe import timeframe_to_msecs
 from freqtrade.misc import deep_merge_dicts, json_load
+from freqtrade.util.datetime_helpers import dt_from_ts, dt_ts
 
 
 logger = logging.getLogger(__name__)
@@ -43,17 +48,37 @@ class Binance(Exchange):
             PriceType.MARK: "MARK_PRICE",
         },
         "ws_enabled": False,
+        "proxy_coin_mapping": {
+            "BNFCR": "USDC",
+            "BFUSD": "USDT",
+        },
     }
 
     _supported_trading_mode_margin_pairs: list[tuple[TradingMode, MarginMode]] = [
         # TradingMode.SPOT always supported and not required in this list
         # (TradingMode.MARGIN, MarginMode.CROSS),
-        # (TradingMode.FUTURES, MarginMode.CROSS),
-        (TradingMode.FUTURES, MarginMode.ISOLATED)
+        (TradingMode.FUTURES, MarginMode.CROSS),
+        (TradingMode.FUTURES, MarginMode.ISOLATED),
     ]
 
-    def get_tickers(self, symbols: list[str] | None = None, *, cached: bool = False) -> Tickers:
-        tickers = super().get_tickers(symbols=symbols, cached=cached)
+    def get_proxy_coin(self) -> str:
+        """
+        Get the proxy coin for the given coin
+        Falls back to the stake currency if no proxy coin is found
+        :return: Proxy coin or stake currency
+        """
+        if self.margin_mode == MarginMode.CROSS:
+            return self._config.get("proxy_coin", self._config["stake_currency"])
+        return self._config["stake_currency"]
+
+    def get_tickers(
+        self,
+        symbols: list[str] | None = None,
+        *,
+        cached: bool = False,
+        market_type: TradingMode | None = None,
+    ) -> Tickers:
+        tickers = super().get_tickers(symbols=symbols, cached=cached, market_type=market_type)
         if self.trading_mode == TradingMode.FUTURES:
             # Binance's future result has no bid/ask values.
             # Therefore we must fetch that from fetch_bids_asks and combine the two results.
@@ -80,7 +105,10 @@ class Binance(Exchange):
                         "\nHedge Mode is not supported by freqtrade. "
                         "Please change 'Position Mode' on your binance futures account."
                     )
-                if assets_margin.get("multiAssetsMargin") is True:
+                if (
+                    assets_margin.get("multiAssetsMargin") is True
+                    and self.margin_mode != MarginMode.CROSS
+                ):
                     msg += (
                         "\nMulti-Asset Mode is not supported by freqtrade. "
                         "Please change 'Asset Mode' on your binance futures account."
@@ -97,23 +125,24 @@ class Binance(Exchange):
         except ccxt.BaseError as e:
             raise OperationalException(e) from e
 
-    async def _async_get_historic_ohlcv(
+    def get_historic_ohlcv(
         self,
         pair: str,
         timeframe: str,
         since_ms: int,
         candle_type: CandleType,
         is_new_pair: bool = False,
-        raise_: bool = False,
         until_ms: int | None = None,
-    ) -> OHLCVResponse:
+    ) -> DataFrame:
         """
         Overwrite to introduce "fast new pair" functionality by detecting the pair's listing date
         Does not work for other exchanges, which don't return the earliest data when called with "0"
         :param candle_type: Any of the enum CandleType (must match trading mode!)
         """
         if is_new_pair:
-            x = await self._async_get_candle_history(pair, timeframe, candle_type, 0)
+            x = self.loop.run_until_complete(
+                self._async_get_candle_history(pair, timeframe, candle_type, 0)
+            )
             if x and x[3] and x[3][0] and x[3][0][0] > since_ms:
                 # Set starting date to first available candle.
                 since_ms = x[3][0][0]
@@ -121,17 +150,89 @@ class Binance(Exchange):
                     f"Candle-data for {pair} available starting with "
                     f"{datetime.fromtimestamp(since_ms // 1000, tz=timezone.utc).isoformat()}."
                 )
+                if until_ms and since_ms >= until_ms:
+                    logger.warning(
+                        f"No available candle-data for {pair} before "
+                        f"{dt_from_ts(until_ms).isoformat()}"
+                    )
+                    return DataFrame(columns=DEFAULT_DATAFRAME_COLUMNS)
 
-        return await super()._async_get_historic_ohlcv(
-            pair=pair,
-            timeframe=timeframe,
-            since_ms=since_ms,
-            is_new_pair=is_new_pair,
-            raise_=raise_,
-            candle_type=candle_type,
-            until_ms=until_ms,
+        if (
+            self._config["exchange"].get("only_from_ccxt", False)
+            or
+            # only download timeframes with significant improvements,
+            # otherwise fall back to rest API
+            not (
+                (candle_type == CandleType.SPOT and timeframe in ["1s", "1m", "3m", "5m"])
+                or (
+                    candle_type == CandleType.FUTURES
+                    and timeframe in ["1m", "3m", "5m", "15m", "30m"]
+                )
+            )
+        ):
+            return super().get_historic_ohlcv(
+                pair=pair,
+                timeframe=timeframe,
+                since_ms=since_ms,
+                candle_type=candle_type,
+                is_new_pair=is_new_pair,
+                until_ms=until_ms,
+            )
+        else:
+            # Download from data.binance.vision
+            return self.get_historic_ohlcv_fast(
+                pair=pair,
+                timeframe=timeframe,
+                since_ms=since_ms,
+                candle_type=candle_type,
+                is_new_pair=is_new_pair,
+                until_ms=until_ms,
+            )
+
+    def get_historic_ohlcv_fast(
+        self,
+        pair: str,
+        timeframe: str,
+        since_ms: int,
+        candle_type: CandleType,
+        is_new_pair: bool = False,
+        until_ms: int | None = None,
+    ) -> DataFrame:
+        """
+        Fastly fetch OHLCV data by leveraging https://data.binance.vision.
+        """
+        df = self.loop.run_until_complete(
+            download_archive_ohlcv(
+                candle_type=candle_type,
+                pair=pair,
+                timeframe=timeframe,
+                since_ms=since_ms,
+                until_ms=until_ms,
+                markets=self.markets,
+            )
         )
 
+        # download the remaining data from rest API
+        if df.empty:
+            rest_since_ms = since_ms
+        else:
+            rest_since_ms = dt_ts(df.iloc[-1].date) + timeframe_to_msecs(timeframe)
+
+        # make sure since <= until
+        if until_ms and rest_since_ms > until_ms:
+            rest_df = DataFrame()
+        else:
+            rest_df = super().get_historic_ohlcv(
+                pair=pair,
+                timeframe=timeframe,
+                since_ms=rest_since_ms,
+                candle_type=candle_type,
+                is_new_pair=is_new_pair,
+                until_ms=until_ms,
+            )
+        all_df = concat_safe([df, rest_df])
+        return all_df
+
     def funding_fee_cutoff(self, open_date: datetime):
         """
         Funding fees are only charged at full hours (usually every 4-8h).
@@ -262,7 +363,7 @@ class Binance(Exchange):
             return {}
 
     async def _async_get_trade_history_id_startup(
-        self, pair: str, since: int | None
+        self, pair: str, since: int
     ) -> tuple[list[list], str]:
         """
         override for initial call